Parts for Frigidaire FGMC3066UFB: Doors Parts

This replacement latch assembly secures the refrigerator or freezer door to ensure proper closure and reliable operation. It restores the door catch so the appliance can maintain an effective seal and help prevent cooling loss. What it does:

• Secures the door to keep it closed and aligned
• Replaces a broken, bent, or worn latch that prevents proper latching
• Helps reduce warm air entry caused by a door that won't stay shut
• Works as the mechanical catch that engages the door striker

• Disconnect power (unplug appliance) before servicing to avoid shock or injury.
• Remove the inner door panel or access trim as needed to reach the latch; keep screws and fasteners organized.
• Align the latch with the door striker and tighten screws securely without over-torquing.
• Test door operation several times after installation to ensure proper engagement and seal.

This flat replacement glass shelf provides a stable, easy-to-clean surface inside the refrigerator to help organize and protect food. It restores proper shelving where the original glass was cracked, scratched, or missing. What it does:

• Replaces a flat refrigerator shelf glass to support food items and containers
• Restores even storage surfaces and prevents spills from soaking shelves below
• Helps maintain refrigerator interior organization and visibility of contents
• Fits into existing shelf supports or trim rails when the original glass is damaged or removed

• One flat replacement glass shelf

• Handle the glass carefully and wear cut-resistant gloves to avoid injury
• Remove food and any trim/shelf supports before swapping the glass
• Place the new glass into the existing rails or supports; do not force or bend components
• If any clips, rails or seals are damaged, replace them before use to ensure proper fit and safety

The Outer Door Assembly is an OEM replacement part for Frigidaire electric ranges. This outer stainless steel shell encases and protects the entire oven door. 

Causes for replacement typically include cosmetic wear over time like scratches, dents or discoloration that degrade the door's appearance.

Symptoms of a worn outer door include:

• Dull or fading exterior finish
• Visible dings, dents or scratches marring the door surface  
•  Scratched or clouded window glass  obscuring oven visibility

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore electric ranges. 

This replacement front panel restores the exterior trim around the appliance control area, protecting switches and electronics while renewing the unit's appearance. Designed to match OEM fit and finish for a clean, factory look. What it does:

• Covers and protects the control area from spills, dust, and impact
• Provides the correct mounting surface and openings for buttons and displays
• Helps restore cosmetic appearance when original panel is cracked, dented, or faded
• Secures with factory clip or screw locations to maintain proper alignment

• Always disconnect power to the appliance before starting any repair.
• Installation typically requires removing trim screws/clips and lifting the old panel out of position.
• Keep all fasteners and verify clip orientation to ensure a tight fit.

This metal door hinge replaces a worn or damaged refrigerator door pivot to restore smooth opening and proper door alignment. It helps keep the door secure and prevents sagging, rubbing, or uneven sealing. What it does:

• Provides a stable pivot point so the refrigerator door opens and closes correctly
• Restores proper door alignment to improve sealing and cooling performance
• Stops door sagging or rubbing on the cabinet edge
• Reduces noise from a loose or worn hinge

• One hinge

• Unplug the appliance and remove food/obstructions from the door area before starting
• Support the door while removing and installing the hinge to prevent drops or damage
• Reuse original fasteners unless replacements are specified by the manufacturer
• If the door has glass or heavy components, get a second person to help for safety

This small mounting spacer positions and supports components inside the appliance to ensure correct clearances and alignment. It helps keep panels and assemblies spaced properly for reliable operation and noise reduction. What it does:

• Creates and maintains the correct gap between panels or internal components
• Prevents rubbing, vibration, and misalignment that can cause noise or wear
• Helps secure assemblies for proper airflow and operation
• Used where a fixed, non-adjustable separation is required

• One spacer

• Install in the location shown in the appliance parts diagram; fasten with the original screw or clip
• Replace any damaged or worn spacers to restore proper component alignment
• Power off and disconnect the appliance before accessing internal panels

The Handle is an OEM part for Frigidaire ranges. Crafted from durable heat-resistant metal, these handles provide safe, ergonomic access to oven interiors during cooking cycles.  

Prolonged exposure to elevated oven temperatures causes typical discoloration of painted finishes as well as looseness from load stresses reducing tactile control over years. Cooking convenience decreases without gripable surfaces.

Symptoms indicating handle wear include:

• Faded, chipped, or flaking handle finishes  
• Loose, rattling, or awkward movement from placement
• Deteriorating mounting attachments risking accidental falls

Replacing with this OEM Frigidaire handle restores tactile guidance into the cooking cavity. Compatibility also fits some Kenmore, Electrolux, and Gibson ranges renewing secure doorknob function through authorized maintenance. 

This appliance screw fastens panels, brackets, and other components inside the unit. Replace a missing, rusty, or stripped fastener to restore a secure fit and help prevent rattles, misalignment, or premature wear.

• Secures appliance components such as panels, brackets, and covers
• Restores proper fit when an original screw is missing or stripped
• Helps reduce vibration and noise from loose parts
• Common signs: loose or misaligned parts, rattling, or a missing screw

• Disconnect power before servicing
• Match the new screw to the original for size and thread before installing
• Hand-start threads to avoid cross-threading; do not overtighten
• Reuse any original washers or clips if they were used with the old screw

This appliance screw fastens panels, brackets, and other components inside the unit. Replace a missing, rusty, or stripped fastener to restore a secure fit and help prevent rattles, misalignment, or premature wear.

• Secures appliance components such as panels, brackets, and covers
• Restores proper fit when an original screw is missing or stripped
• Helps reduce vibration and noise from loose parts
• Common signs: loose or misaligned parts, rattling, or a missing screw

• Disconnect power before servicing
• Match the new screw to the original for size and thread before installing
• Hand-start threads to avoid cross-threading; do not overtighten
• Reuse any original washers or clips if they were used with the old screw

Replacement screw that secures panels, trim and internal components in compatible appliances. Restores proper fit and helps reduce rattling or loose parts when the original fastener is missing, worn, or damaged. What it does:

• Fastens panels, brackets, trim pieces and small component assemblies to the appliance frame
• Helps eliminate noise and vibration caused by loose or missing fasteners
• Replaces stripped, corroded or missing screws to restore secure mounting
• Matches OEM fit when the identical screw is required for proper alignment

• Disconnect power to the appliance before starting any repair
• Use the correct driver size to avoid cam-out or damage to the screw head
• Do not overtighten; overtightening can strip threads or crack plastic parts

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.