Parts for Frigidaire LFTR2045VF0: Doors Parts

This replacement freezer door assembly restores appearance and sealing performance. The stainless steel finish matches the original look and, when properly aligned, helps keep cold air in to reduce frost and maintain stable freezer temperatures.

• Forms the insulated barrier for the freezer compartment and seals against the cabinet
• Supports door bins, handle, and trim components
• Helps prevent warm air infiltration that can cause frost and temperature swings
• Common symptoms: dents or warping, persistent condensation or frost at the door, door sagging, or not closing/sealing properly

• Disconnect power; if equipped with a dispenser, shut off water and disconnect door wiring/water lines before removal
• Remove contents; use two people to support and lift the door off the hinges
• Transfer handle, bins, nameplate, and hinge/cam hardware from the old door as required
• Reinstall and adjust so the gasket makes uniform contact all around; verify proper closing and seal

Color: Grey

The Gasket is an OEM part for Frigidaire refrigerators. It is designed to create a secure seal around the refrigerator or freezer door, maintaining the internal temperature and preventing warm air from entering.

Causes of a bad gasket can include general wear and tear, frequent door openings that stress the gasket, exposure to food spills or harsh cleaning chemicals, or damage from improper handling or accidental impact.

Symptoms of a bad gasket include:

• The refrigerator or freezer door not sealing properly
• Warm air entering the appliance, causing temperature fluctuations
• Increased frost or condensation buildup inside the unit
• Higher energy bills due to the appliance working harder to maintain temperature

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Color: Grey

This outer cabinet door replaces a damaged or dented refrigerator door panel to restore appearance and proper closing. It provides a clean finished surface and helps maintain internal temperature by allowing the door to seal correctly. What it does:

• Replaces a bent, dented, or cosmetically damaged outer door panel
• Restores a flat surface so the door can close and latch properly
• Helps maintain a proper seal to reduce cold air loss and improve efficiency
• Improves the appliance's appearance after impact or wear

• Disconnect power and empty the door before starting; follow OEM service manual instructions
• Reinstallation may require removing hinges, trim, and hardware; keep fasteners organized
• Some alignment or shim adjustments may be needed for proper fit and sealing

The Door Bin is an OEM part for Frigidaire refrigerators. It is designed to securely hold and organize products on the door, keeping them easily accessible and fresh.

A bad door bin can be caused by wear and tear, damage, or improper handling. When the assembly becomes faulty, it can result in issues such as a loose or broken door bin, difficulty in opening or closing the bin, or inadequate temperature control for items.

Symptoms of a bad bin include:

• Unstable or wobbly storage for dairy products
• Difficulty in accessing or retrieving items from the bin
• Spoiled items due to temperature fluctuations

Replace your faulty bin with this genuine OEM part to restore organization in your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Door Bin is an OEM part for Frigidaire refrigerators. It is designed to securely hold and organize products on the door, keeping them easily accessible and fresh.

A bad door bin can be caused by wear and tear, damage, or improper handling. When the assembly becomes faulty, it can result in issues such as a loose or broken door bin, difficulty in opening or closing the bin, or inadequate temperature control for items.

Symptoms of a bad bin include:

• Unstable or wobbly storage for dairy products
• Difficulty in accessing or retrieving items from the bin
• Spoiled items due to temperature fluctuations

Replace your faulty bin with this genuine OEM part to restore organization in your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This bearing supports and allows smooth rotation of the dryer drum, helping reduce noise and wear. Replacing a worn bearing restores stable drum movement and helps prevent scraping, thumping, or drag during cycles.

• Supports the rear of the drum for proper alignment and smooth rotation
• Can help address squeaking, grinding, scraping, or thumping sounds
• Reduce drum wobble, drag, or intermittent stopping during operation
• Wear item that can degrade over time with heat and load stress

• Disconnect power before service and allow components to cool
• Access typically requires removing the top and front panels
• Inspect the drum shaft, support bracket, and glides for wear; replace if needed
• Apply manufacturer-approved high-temp lubricant where specified

The Hook is an OEM part for Frigidaire refrigerators. It helps to ensure a secure and proper closure of the refrigerator door.

A bad door closer hook can be caused by wear and tear, damage, or misalignment. Signs of a faulty door closer hook include the door not closing fully or not staying closed, difficulty in opening or closing the door smoothly, or a loose or wobbly door.

Symptoms of a bad door closer hook can include:

• The refrigerator door not sealing properly
• Excessive force required to open or close the door
• Visible damage or misalignment of the door closer hook

Replace your worn or damaged door closer hook with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This factory screw secures interior or door components in your refrigerator so they stay tight and aligned. Replace missing, stripped, or corroded hardware to eliminate looseness and prevent parts from shifting or rattling during use.

• Fastens brackets, trim, rails, bins, or handles to the cabinet or door
• Restores a secure fit when the original screw is lost, damaged, or rusted
• Helps correct looseness, vibration, and rattling from unsecured parts
• Common symptoms: loose or wobbling handle/trim, misaligned parts, missing hardware

• Disconnect power to the appliance before servicing; turn off water if working near dispenser/ice areas
• Match to the original hardware and install in the same location; reuse any washers/spacers
• Start threads by hand to prevent cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to avoid stripping threads or cracking plastic