Parts for Ge GFSF2HCYCBB: 01 - Doors Parts

Replacement hex washer head screw for refrigerator assembly and component mounting. Needed when original screws are stripped, lost, or damaged during repair.

Mounting bracket that secures and stabilizes refrigerator panels and assemblies. Replace when the original bracket is broken, cracked, or missing.

Machine screw for refrigerator panels, brackets, and assemblies. Replaces lost, stripped, or damaged fasteners to restore secure fit and stability.

Creates an airtight seal between door and cabinet. Replace if worn, torn, or causing air leaks and frost buildup. Verify fit with your model number.

Creates an airtight seal to keep cold air in and moisture out. Replace when worn, cracked, or loose to restore temperature stability and efficiency.

Freezer door cam closure for right-hand side installation. Replace if cam is cracked, broken, or missing to restore proper door alignment and closure.

Right-hand cam closure secures your refrigerator freezer door for a proper latch and tight seal. Replace if cracked, broken, or missing to restore door function.

This cam closure is the left-side closing cam that secures and aligns the freezer door, helping the door latch properly and maintain an even seal to keep the compartment cold. A direct-fit replacement that restores proper door action. What it does:

• Guides and locks the freezer door into the correct closed position
• Helps maintain an even door seal to reduce cold air loss and frost buildup
• Prevents door sagging or misalignment that can keep the door from latching
• Works with the door hinge/latch mechanism to ensure smooth opening and closing

• Disconnect power to the appliance before starting any repair
• Installation may require removing the freezer door or inner door panel; keep fasteners organized
• Handle plastic components carefully to avoid cracking; align cam to hinge before tightening

This cam closure secures the freezer door hinge, helping the door latch properly and maintain a tight seal for consistent cooling. It replaces a worn or broken left-side closure to restore reliable door movement. What it does:

• Acts as the left-side hinge cam that guides and locks the freezer door into position
• Restores proper door alignment and sealing when the closure is worn, cracked, or loose
• Reduces door sag and helps prevent cold air loss and cycling issues
• Works with the freezer hinge assembly to ensure smooth opening and closing

• One left-side cam closure

• Verify left/right orientation before installation; part is specific to the left-side hinge
• Disconnect power to the appliance and remove food from the door area for safe access
• Use basic hand tools; support the door while replacing the cam to avoid damage or injury

Replacement mounting screw for refrigerator panels, brackets, door handles, and trim. Needed when original hardware is missing, stripped, or corroded.

Replacement lower bracket that secures the lower assembly in your refrigerator. Needed when original bracket is cracked, broken, or worn causing misalignment.

Secures brackets, panels, and components inside your refrigerator. Replace stripped, rusted, or missing hardware to restore tight alignment and stability.

2 Per Kit

2 Per Kit

Lower freezer basket for GE refrigerators. Installs in the bottom freezer compartment to organize frozen items. Replace if cracked, broken, or worn.

Restores airtight seal on French door refrigerators. Replace when torn or loose to prevent warm air entry and condensation. Verify fit with your model.

Replace worn or torn French door gaskets to restore your refrigerator's seal and energy efficiency. Easy DIY install—soak in hot water first. Confirm fit.

Replace your refrigerator's door handle assembly if it's cracked, broken, or loose. This tubular handle installs on the door exterior for gripping.

Tubular handle assembly for refrigerator doors. Replaces cracked, broken, or worn handles. Installs on the exterior door for easy opening and closing.

Refrigerator badge nameplate installs on the exterior to display brand identification. Replace if cracked, faded, missing, or damaged cosmetically.

Plastic retaining clip that secures drawer divider modules in place. Replaces broken, cracked, or missing snuggers to restore proper fit and separation.

This plastic thimble fits into the appliance cabinet where the door or dispenser mates with the opening, helping provide a smooth seal and protecting surrounding trim from wear. It restores proper fit and reduces rubbing or chafing. What it does:

• Replaces worn or cracked door thimble that can allow rubbing or misalignment at the door opening
• Guides and cushions the door edge or dispenser as it closes, helping reduce noise and abrasion
• Helps maintain a cleaner seal area by covering damaged or missing trim
• Useful when repair requires restoring proper door fit or preventing further trim damage

• One plastic door thimble as described

• Remove power to the appliance before beginning any repair; follow manufacturer's safety guidance
• Typically installs by snapping into the opening or securing with existing fasteners—inspect surrounding clips or screws for damage
• No special tools usually required, but a flat tool can help remove the old thimble; avoid excessive force to prevent cabinet damage
• If replacement does not correct fit or sealing issues, further inspection of hinges, strikes, or surrounding trim may be needed

Plastic thimble bushing for refrigerator door hinges. Replaces worn, cracked, or missing thimbles that cause door misalignment or loose hinge pins.

Left-hand door closure cam for refrigerators. Installs on the door hinge assembly to control door closure. Replace if cracked, broken, or worn.

Replacement dairy compartment door bin for your refrigerator. Installs on the door to store butter, cheese, and small items. Replace if cracked or broken.

Replacement refrigerator shelf module that installs on cabinet supports to create a stable storage surface. Replace if cracked, damaged, or missing.

This thimble door is the molded trim piece that surrounds the refrigerator/freezer door opening, restoring proper fit and finish. It replaces damaged or worn trim to reduce drafts and improve door alignment and appearance. What it does

• Covers and protects the door opening edge, providing a finished appearance
• Helps maintain a consistent seal by supporting proper door alignment
• Reduces air leaks and drafts at the door opening when installed correctly
• Replaces cracked, warped, or missing trim that can catch or rub during door use

• One thimble door trim piece as shown

• Disconnect power to the appliance before beginning any repair
• Typically secures with clips or screws; inspect existing fasteners and retainers for reuse
• Handle trim gently to avoid cracking; align carefully to ensure a proper fit

Door hinge thimble for refrigerator freezer doors. Installs on door hinge pivot points. Replace if cracked, worn, or missing to restore proper alignment.

Sheet metal screw secures refrigerator panels, trim, and brackets. Replace missing, stripped, or corroded screws to restore proper fit and assembly.

Set screw secures refrigerator door handles in place. Replace if lost, stripped, or missing after repairs. Requires hex wrench for installation.

Color: Black

Small cushioning bumper for French-door refrigerators. Prevents door rattling and protects against wear. Replace if cracked, missing, or worn out.

Refrigerator door stop that secures the door in the open position. Replace if cracked, broken, or missing to prevent door from swinging shut unexpectedly.