Parts for Ge GTH18ECB2RBB: 01 - Doors Parts

This is the freezer door handle that provides a sturdy, comfortable grip to open and close your freezer door. Replace a cracked, loose, or discolored handle to restore a clean appearance and confident feel.

• Provides the factory grip and leverage for opening/closing the freezer door
• Replaces a broken, loose, missing, or heavily worn handle
• Can help when the door is hard to open due to a damaged or absent handle
• Restores the original look on compatible models

• Disconnect power before servicing; work carefully to protect the door finish
• Support the handle during removal to prevent scratching
• Transfer any decorative end caps/covers from the old handle if your model uses them and align with existing mounting points
• Tighten fasteners evenly; do not overtighten

The Freezer Door Handle is an OEM replacment part for GE refrigerators. This handle allows for easy opening and closing access to frozen food items.

Causes of a problematic handle could include cracked or broken mounting posts after years of use. UV exposure from sunlight may also degrade surface plastics or discolor the finish.

Symptoms of a bad freezer handle include:

• Difficulty opening the door without both hands
• The handle detaching completely from the door
• Inability to securely latch or close the freezer door
• Stress cracks or aged discoloration of plastics

This GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models.

This fresh food door handle restores a secure, comfortable grip for opening the refrigerator compartment. Replace a cracked or loose handle to improve everyday use and keep your fridge looking clean and intact.

• Provides a solid handhold to open and close the fresh food (refrigerator) door
• Replaces broken, cracked, or missing handle
• Addresses a loose or wobbly handle that won't stay tight
• Helps restore original fit and appearance when installed with the correct hardware

• Protect the door finish with a soft cloth and wear work gloves
• Use the correct hex/Allen or Torx driver for your model's handle fasteners
• Align the handle on the mounting points and tighten screws evenly—do not overtighten
• If your model uses decorative end caps, transfer them from the original handle

The Fresh Food Door Handle is an OEM part for GE refrigerators. This handle is attached to the refrigerator's fresh food compartment door, providing a sturdy grip for opening and closing the door. Measure: Depth 20 in, Height 3.5 in, Width 3.75 in

Causes of a bad fresh food door handle can include regular wear and tear, accidental impact, or over-tightening of screws during installation. A damaged handle can hinder the door’s operation and affect the refrigerator's usability.

Symptoms of a bad fresh food door handle include:

• The handle being loose or wobbly
• Cracks or visible damage on the handle
• Difficulty in opening or closing the refrigerator door
• The handle completely detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This machine screw secures refrigerator brackets, panels, and hardware. Its 12-24 thread and integrated hex-washer head provide a snug, vibration-resistant hold to keep components properly mounted and aligned.

• Fastens mounting brackets, covers, and other hardware to the refrigerator cabinet or frame
• Replaces a missing, stripped, or corroded screw to restore a secure attachment
• Helps reduce rattles, vibration, or shifting caused by loose fasteners
• Supports proper fit and alignment of serviced components

• Disconnect power before servicing; wear cut-resistant gloves
• Match thread and length to the original; do not force mismatched hardware
• Start by hand to avoid cross-threading; tighten snugly without overtightening, especially into plastic
• Retain and transfer any spacers or clips from the original hardware

The Freezer Door Gasket is an OEM replacement part for GE refrigerators. As the main door gasket, it provides an airtight seal between the refrigerator door and body. This prevents cool air from leaking out while keeping external warmth and odors from seeping in. This gasket is dark gray or black in color.

Causes can be normal wear and tear over the lifespan of continuous use, accidental tears or punctures from sharp objects, or premature breakdown if exposed to excessive moisture.

Symptoms of a bad gasket door include:

• Cool air drafts felt around the perimeter when the door is closed
• Frost or condensation building up inside the refrigerator compartment
• Higher energy bills indicating inefficient insulation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Door Gasket is an OEM part for GE freezers. This gasket plays a crucial role in ensuring an airtight seal around the freezer door, preventing warm air from entering and cold air from escaping.  

Over time, freezer door gaskets can wear out or become damaged due to frequent use, accidental damage, or exposure to extreme temperatures. It is essential to replace the gasket if you notice any of the symptoms mentioned above to ensure your freezer operates efficiently and to avoid unnecessary energy consumption.

Symptoms of a bad Freezer Door Gasket include:

• Visible tears, warps, or gaps in the gasket
• Condensation or frost buildup around the door edges
• Difficulty in maintaining consistent freezer temperatures
• An increase in energy consumption as the freezer works harder to maintain its internal temperature

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Refrigerator Door Gasket is an OEM part for GE refrigerators. This gasket is designed to form a tight seal around the refrigerator door, preventing warm air from entering and cold air from escaping, thus maintaining the appliance's internal temperature.

Causes of a bad gasket can include regular wear and tear, exposure to varying temperatures, or damage from cleaning agents. A compromised gasket can lead to energy inefficiency and temperature fluctuations inside the refrigerator.

Symptoms of a bad refrigerator door gasket include:

• Visible cracks, tears, or deformities in the gasket
• The door not sealing properly, causing cool air to escape
• Increased frost or ice buildup inside the refrigerator
• Higher than usual energy bills due to the refrigerator working harder to maintain temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fresh Food Door Gasket is an OEM part for GE refrigerators. This gasket is crucial for creating a tight seal around the edge of the refrigerator door, ensuring that cold air stays inside and warm air stays out. By maintaining an airtight seal, this gasket helps to keep food fresh longer, prevents frost buildup, and enhances the overall energy efficiency of the refrigerator. 

Symptoms of a failing fresh food door gasket include:

• Noticeable gaps between the gasket and the refrigerator frame
• Condensation or frost forming inside the refrigerator
• Increased energy consumption as the refrigerator works harder to maintain its internal temperature
• The door not closing properly or feeling loose

Causes of door gasket wear typically include normal aging, exposure to harsh cleaning chemicals, and frequent opening and closing of the refrigerator door, which can stretch and deform the gasket over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: white. It measures about 12 inches wide by 6 inches high.

The Freezer Door Shelf Bar is an OEM part compatible with GE refrigerators. This component serves as a support and retaining bar for the shelves located on the inside of the freezer door, ensuring they remain securely in place. This shelf bar measures 23” wide by 2” high and 5” deep

Symptoms that may indicate the need to replace the freezer door shelf bar include:

• Shelves becoming loose or falling out of the freezer door
• The bar itself becoming cracked, bent, or otherwise damaged

Causes of a faulty freezer door shelf bar can include physical impact or mishandling, excessive weight or force applied to the shelves, or general wear and tear over extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

Color: white. Measures about 1/2 an inch wide by 2/3 of an inch high.

The Door Shelf Bar is an OEM part for GE refrigerators. This bar provides support and containment for items stored on the door shelves, helping to keep them organized and securely in place when the door is opened and closed. 

Over time, the door shelf bar can become damaged due to regular use, heavy items, or accidental impact. If the bar is broken or missing, it can result in items falling out of the door shelves and potentially breaking.

Symptoms of a bad door shelf bar include:

• Items falling out of the door shelves
• The bar being loose or not fitting properly
• Visible cracks or damage on the bar
• Difficulty keeping the door shelves organized

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Screw is an OEM replacement part for GE refrigerators. Countless screws are used throughout the refrigerator to securely hold parts in place.

Symptoms of a bad or missing screw can include:

• Rattling or vibration noises coming from inside the appliance 
• Doors or other parts that are no longer properly aligned
• Increased frost or cold air leaks due to compromised seals

Causes may include normal wear and tear over time, accidental damage or loss of a screw during repairs, or improper assembly leaving crucial screws omitted. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.

This plug button thimble is a small control-panel insert that secures and centers push buttons, helping keep button caps in place and reducing moisture or debris entry. It restores proper button feel and alignment on the control panel. What it does:

• Centers and retains push-button caps so buttons press and release correctly
• Helps prevent dirt and spills from entering the control-panel opening
• Replaces a cracked, worn, or missing thimble that lets buttons wobble or fall inward
• Compatible with the original push-button assembly to restore original fit and function

• Simple, non-electrical replacement—power to the appliance is not required for this exterior part, but unplugging is recommended if removing trim near live components
• Remove the button cap first, press the old thimble out from the front or back as applicable, then press the new thimble into the panel opening until fully seated
• Inspect button cap and surrounding trim for damage; replace any damaged mating parts for best fit
• Use care to avoid scratching the control panel; keep small parts away from children

This plug button is a small snap-in cap used on refrigerators to cover exposed holes on door handles, liners, or trim. It restores a clean, finished look while helping keep dust and moisture out of the cabinet.

• Snaps into a screw or access hole on a handle, liner, or trim panel
• Covers fasteners and gaps for a clean, finished appearance
• Helps block dirt and moisture from open holes
• Typical symptoms: missing cap, broken or loose plug, visible screw hole or cosmetic gap

• Unplug the appliance before servicing and use caution around sharp edges
• Align the plug with the hole and press straight in by hand until fully seated and flush
• For handle screw holes, tighten fasteners first, then install the cap
• Avoid using metal tools on finished surfaces to prevent scratches