Parts for Ge GTS15BBPFLBB: 01 - Doors Parts

This is the freezer door handle that provides a sturdy, comfortable grip to open and close your freezer door. Replace a cracked, loose, or discolored handle to restore a clean appearance and confident feel.

• Provides the factory grip and leverage for opening/closing the freezer door
• Replaces a broken, loose, missing, or heavily worn handle
• Can help when the door is hard to open due to a damaged or absent handle
• Restores the original look on compatible models

• Disconnect power before servicing; work carefully to protect the door finish
• Support the handle during removal to prevent scratching
• Transfer any decorative end caps/covers from the old handle if your model uses them and align with existing mounting points
• Tighten fasteners evenly; do not overtighten

This fresh food door handle restores a secure, comfortable grip for opening the refrigerator compartment. Replace a cracked or loose handle to improve everyday use and keep your fridge looking clean and intact.

• Provides a solid handhold to open and close the fresh food (refrigerator) door
• Replaces broken, cracked, or missing handle
• Addresses a loose or wobbly handle that won't stay tight
• Helps restore original fit and appearance when installed with the correct hardware

• Protect the door finish with a soft cloth and wear work gloves
• Use the correct hex/Allen or Torx driver for your model's handle fasteners
• Align the handle on the mounting points and tighten screws evenly—do not overtighten
• If your model uses decorative end caps, transfer them from the original handle

The Screw Package is an OEM replacement part for GE refrigerators. It contains a pack of 12 identical screws for miscellaneous securing and assembly needs.

These screws play a supporting role, helping attach shelf tracks, cover panels, door hinges, and other interior parts. By maintaining components securely in place, they help ensure smooth operation and prevent rattling or other noises. 

Symptoms of insufficiently secured parts include:

• Noises heard from loose shelves or door components  
• Detaching handles, hinges, or panels
• Shelves shifting positions or becoming misaligned

Causes of needing replacement screws can include loss, stripping, or wear over time from repeated securement and removal of parts during cleaning or repairs. 

This multipack of GE screws is perfect for minor refrigerator maintenance or to stock up on extras. They are also compatible with replacement hardware from Hotpoint, RCA, and certain Kenmore models. 

This replacement door shelf retainer bar restores secure storage on your refrigerator door, keeping bottles and jars from tipping or falling when you open and close the door. Replace broken or missing retainers to recover usable door space. What it does:

• Holds items in the door bin area to prevent spills and falls
• Replaces cracked, warped, or missing retainers
• Helps the door close smoothly by keeping contents contained
• Common signs: bar won't stay seated, broken tabs, items fall from door

• 1 door shelf retainer bar

• Remove items from the affected door shelf before replacement
• Align the bar with the mounting points and snap/seat it firmly into place
• Verify a secure fit along the full length before reloading items
• Avoid overloading the shelf to prevent future damage

The End Cap is an OEM part for GE refrigerators. It is designed to fit on the ends of refrigerator shelf supports, providing a finished look and helping to secure the shelf in place. This small but important component prevents the edges of the shelves from becoming damaged or causing injury by covering sharp ends and supporting the overall structure of the shelving system.

Symptoms of a bad End Cap include:

• Shelves becoming loose or falling down,
• Visible cracks or breaks in the end cap,
• Difficulty in securing the shelf properly.

Causes of end cap failure typically include physical stress from overloading shelves, accidental impacts during loading or unloading items, or material degradation over time due to the environmental conditions within the fridge.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The End Cap is an OEM replacement part for GE refrigerators. It is a small but essential component that serves to cover and protect the ends of various refrigerator parts, such as shelves or door bins.

Causes of a need to replace the end cap can include physical damage, such as cracks, chips, or breaks, as well as discoloration or fading over time due to exposure to moisture or cleaning products.

Symptoms of a faulty end cap:

• Cracks or breaks in the end cap material
• End cap becoming loose or detached from the shelf or bin
• Discoloration or fading, affecting the overall aesthetic appeal of the refrigerator

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

The Freezer Door Gasket is an OEM replacement part for GE refrigerators. As the main door gasket, it provides an airtight seal between the refrigerator door and body. This prevents cool air from leaking out while keeping external warmth and odors from seeping in. This gasket is dark gray or black in color.

Causes can be normal wear and tear over the lifespan of continuous use, accidental tears or punctures from sharp objects, or premature breakdown if exposed to excessive moisture.

Symptoms of a bad gasket door include:

• Cool air drafts felt around the perimeter when the door is closed
• Frost or condensation building up inside the refrigerator compartment
• Higher energy bills indicating inefficient insulation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement door gasket for the refrigerator's fresh-food compartment. Restores a tight seal to help keep food cold, reduce frost and condensation, and improve cooling efficiency. What it does:

• Seals the fresh-food door to prevent warm air entering the compartment
• Helps reduce frost build-up and interior condensation
• Can stop frequent compressor cycling caused by a leaking door seal
• Restores proper temperature maintenance and energy performance when the old gasket is damaged

• Disconnect power to the appliance before starting any repair
• Remove the old gasket, clean the door channel, then press the new gasket into the channel beginning at a top corner and working around the door until fully seated
• Check that the magnetic edge seats evenly around the door for a uniform seal
• Avoid using sharp tools that could tear the gasket

Color: white. It measures about 12 inches wide by 6 inches high.

The Door Shelf Trim is an OEM part for GE refrigerators. It functions as a convenient storage area attached to the inside of the refrigerator door, designed to hold bottles, jars, and other condiments securely. This shelf helps to maximize the storage capacity of the refrigerator by effectively organizing and separating items for easy access.

Causes of a bad Door Shelf can include overloading, which may lead to stress fractures or complete breaks.  

Symptoms of a bad Door Shelf include:

• Cracking or breaking, especially under weight
• Sagging or inability to hold items securely
• Difficulty attaching the shelf to the door due to damaged hooks or clasps

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

The Screw is an OEM replacement part for GE refrigerators. Countless screws are used throughout the refrigerator to securely hold parts in place.

Symptoms of a bad or missing screw can include:

• Rattling or vibration noises coming from inside the appliance 
• Doors or other parts that are no longer properly aligned
• Increased frost or cold air leaks due to compromised seals

Causes may include normal wear and tear over time, accidental damage or loss of a screw during repairs, or improper assembly leaving crucial screws omitted. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.

The Freezer Door Gasket is an OEM replacement part for GE refrigerators. As the main door gasket, it provides an airtight seal between the refrigerator door and body. This prevents cool air from leaking out while keeping external warmth and odors from seeping in. This gasket is dark gray or black in color.

Causes can be normal wear and tear over the lifespan of continuous use, accidental tears or punctures from sharp objects, or premature breakdown if exposed to excessive moisture.

Symptoms of a bad gasket door include:

• Cool air drafts felt around the perimeter when the door is closed
• Frost or condensation building up inside the refrigerator compartment
• Higher energy bills indicating inefficient insulation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This plug button thimble is a small control-panel insert that secures and centers push buttons, helping keep button caps in place and reducing moisture or debris entry. It restores proper button feel and alignment on the control panel. What it does:

• Centers and retains push-button caps so buttons press and release correctly
• Helps prevent dirt and spills from entering the control-panel opening
• Replaces a cracked, worn, or missing thimble that lets buttons wobble or fall inward
• Compatible with the original push-button assembly to restore original fit and function

• Simple, non-electrical replacement—power to the appliance is not required for this exterior part, but unplugging is recommended if removing trim near live components
• Remove the button cap first, press the old thimble out from the front or back as applicable, then press the new thimble into the panel opening until fully seated
• Inspect button cap and surrounding trim for damage; replace any damaged mating parts for best fit
• Use care to avoid scratching the control panel; keep small parts away from children