Parts for Ge GTS21SBXASS: 01 - Doors Parts

This Special Washer is a factory fastener component used in refrigeration assemblies. It distributes load and provides the correct spacing within the original stack-up, helping keep parts aligned, reduce wear, and maintain smooth, reliable operation.

• Distributes fastener load and protects mounting surfaces
• Maintains proper spacing and alignment in the original assembly
• Helps reduce friction and metal-to-metal wear
• Replaces a missing, worn, or deformed washer that can lead to looseness or scraping noises

• Disconnect power before servicing
• Support any moving component before removing hinge or bracket hardware
• Note the original order/orientation of spacers and washers; take a photo for reference
• Tighten fasteners securely but avoid over-tightening; verify alignment and clearances after reassembly

This is a replacement protective cap that covers and shields exposed terminals or component ends to help prevent dirt, moisture, and accidental contact. It restores basic protection and preserves component integrity. What it does

• Covers exposed terminals or component ends to reduce risk of shorting and contamination
• Helps keep dust and moisture off vulnerable connections
• Provides a simple, low-cost way to restore a missing or damaged protective cover
• Fits in place to maintain original clearance and protective function

• One replacement protective cap

• Inspect the mating component for damage before installing the cap
• Press the cap fully into place until it seats securely; no tools typically required
• Ensure power is disconnected and appliance is unplugged before working near electrical components
• If the original cap is part of a harness or mounting assembly, verify correct orientation before finalizing installation

This Hinge cap (M) covers and protects the refrigerator door hinge area, keeping the hinge pivot clean and improving the door's appearance. It's a simple replacement that restores a finished look and helps keep the hinge working properly. What it does:

• Covers the hinge pivot to protect it from dirt and debris
• Helps maintain proper hinge alignment and door movement
• Restores the cabinet's finished appearance around the hinge
• Common symptom: cracked, broken, or missing cap visible at the hinge

• One hinge cap (M)

• Disconnect power to the appliance before starting any repair
• Support the door or remove it per the appliance manual to avoid injury or damage
• Typically installs with basic hand tools; do not force parts into place
• If hinge or mounting hardware is damaged, replace those components as well

A single replacement cap handle screw that secures the decorative handle cap to the appliance door, restoring a snug fit and preventing the cap from shifting or falling off. Fits the factory handle cap design. What it does:

• Secures the handle cap to the door handle assembly so the cap stays aligned and tight.
• Fixes common symptoms like a loose or rattling handle cap or a cap that shifts when the door is opened.
• Replaces missing or worn screw hardware to restore original fit and appearance.
• Small OEM-style screw sized for the handle cap mounting location.

• One cap handle screw (black), matching the original hardware.

• Use the correct screwdriver or bit to avoid stripping the screw head.
• Hand-start the screw to ensure proper threading; do not overtighten.
• No special tools or electrical disconnection typically required, but follow appliance-specific service guidance.

This door handle assembly replaces a worn or damaged refrigerator door handle, restoring a secure grip and a clean stainless look. Designed as a direct-replacement exterior handle to renew appearance and function. What it does

• Replaces a damaged, loose, or scratched refrigerator door handle
• Restores a solid grip for opening and closing the door
• Matches stainless steel finish to maintain a cohesive exterior appearance
• Helps prevent door mis-sealing caused by bent or broken handles

• One door handle pack assembly (stainless steel finish), as specified by the manufacturer

• Installation requires removing the old handle and fastening this assembly with the original mounting hardware; keep screws and brackets from the old handle
• Use basic hand tools; avoid overtightening fasteners to prevent stripping or cracking
• Disconnect power only if panels near electrical components must be removed; otherwise power shutoff is not typically required for exterior handle replacement

The Set Screw is an OEM part for GE refrigerators. It is used to secure various components within the refrigerator, ensuring they remain firmly in place during operation. 

Over time, a set screw can become worn, stripped, or lost due to regular use or during repairs. A missing or damaged set screw can lead to loose components, which may cause operational issues or even damage other parts of the refrigerator.

Symptoms of a bad Set Screw include:

• Loose or rattling components inside the refrigerator
• Difficulty in keeping parts securely fastened
• Noise coming from the area where the screw is used
• Misalignment of parts, leading to improper functioning

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A stainless-steel handle fastener that secures the refrigerator door handle to the door assembly for a solid, wobble-free grip. Use to restore a loose, stripped, or missing handle attachment point. What it does:

• Secures the door handle to the door/handle mounting point so the handle stays tight and aligned.
• Stops handle movement, wobbling, or rattling caused by a worn or missing fastener.
• Replaces a corroded or damaged fastener to restore a secure connection.
• Stainless finish resists corrosion at the handle mounting point.

• Disconnect power to the appliance before starting work whenever access to internal parts is required.
• Use the correct screwdriver or bit; turn carefully and avoid sideways force on the handle.
• Do not overtighten—over-torquing can strip threads or crack surrounding trim.
• Keep removed hardware and any trim pieces for reassembly; inspect handle and threaded inserts for damage.