Parts for Ge GTT18BBBHRCC: 01 - Doors Parts

This freezer door handle assembly replaces a damaged or loose handle and restores a secure, comfortable grip. Finished in bisque to match your appliance, it refreshes appearance and helps the door open and close as intended.

• Provides the exterior grip for opening and closing the freezer door
• Attaches to the door's factory mounting posts/brackets and secures with screws or set screws (varies by model)
• Restores original look with a matching bisque finish
• Common symptoms: cracked, broken, or missing handle; handle feels loose or will not stay tight

• Wear gloves and keep the door closed for stability during replacement
• If present, remove trim caps; loosen set screws or mounting hardware and lift off the old handle
• Position the new handle on the mounting posts/brackets; tighten hardware until snug; reinstall caps
• Do not overtighten; verify the handle is aligned and secure before use

The Freezer Door Handle is an OEM replacment part for GE refrigerators. This handle allows for easy opening and closing access to frozen food items.

Causes of a problematic handle could include cracked or broken mounting posts after years of use. UV exposure from sunlight may also degrade surface plastics or discolor the finish.

Symptoms of a bad freezer handle include:

• Difficulty opening the door without both hands
• The handle detaching completely from the door
• Inability to securely latch or close the freezer door
• Stress cracks or aged discoloration of plastics

This GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models.

Replace a worn or broken fresh food door handle with this color-matched bisque handle to restore a solid, comfortable grip and clean appearance on your refrigerator's main compartment door.

• Provides the handhold to open and close the fresh food door
• Worn, loose, cracked, or missing handle can make the door hard to open and detract from appearance
• Color: Bisque, for models that use a bisque fresh food handle
• Restores proper feel and operation when opening the refrigerator section

• Unplug the appliance or disconnect power before servicing
• Open the door to access handle screws; support the handle as you remove fasteners
• Transfer any end caps or mounting screws from the old handle if your model reuses them
• Tighten all screws securely and check for firm, wobble-free fit

The Fresh Food Door Handle is an OEM part for GE refrigerators. This handle is attached to the refrigerator's fresh food compartment door, providing a sturdy grip for opening and closing the door. Measure: Depth 20 in, Height 3.5 in, Width 3.75 in

Causes of a bad fresh food door handle can include regular wear and tear, accidental impact, or over-tightening of screws during installation. A damaged handle can hinder the door’s operation and affect the refrigerator's usability.

Symptoms of a bad fresh food door handle include:

• The handle being loose or wobbly
• Cracks or visible damage on the handle
• Difficulty in opening or closing the refrigerator door
• The handle completely detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This machine screw secures refrigerator brackets, panels, and hardware. Its 12-24 thread and integrated hex-washer head provide a snug, vibration-resistant hold to keep components properly mounted and aligned.

• Fastens mounting brackets, covers, and other hardware to the refrigerator cabinet or frame
• Replaces a missing, stripped, or corroded screw to restore a secure attachment
• Helps reduce rattles, vibration, or shifting caused by loose fasteners
• Supports proper fit and alignment of serviced components

• Disconnect power before servicing; wear cut-resistant gloves
• Match thread and length to the original; do not force mismatched hardware
• Start by hand to avoid cross-threading; tighten snugly without overtightening, especially into plastic
• Retain and transfer any spacers or clips from the original hardware

The Freezer Door Gasket is an OEM part for GE freezers. This gasket plays a crucial role in ensuring an airtight seal around the freezer door, preventing warm air from entering and cold air from escaping.  

Over time, freezer door gaskets can wear out or become damaged due to frequent use, accidental damage, or exposure to extreme temperatures. It is essential to replace the gasket if you notice any of the symptoms mentioned above to ensure your freezer operates efficiently and to avoid unnecessary energy consumption.

Symptoms of a bad Freezer Door Gasket include:

• Visible tears, warps, or gaps in the gasket
• Condensation or frost buildup around the door edges
• Difficulty in maintaining consistent freezer temperatures
• An increase in energy consumption as the freezer works harder to maintain its internal temperature

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Fresh Food Door Gasket is an OEM part for GE refrigerators. This gasket is crucial for creating a tight seal around the edge of the refrigerator door, ensuring that cold air stays inside and warm air stays out. By maintaining an airtight seal, this gasket helps to keep food fresh longer, prevents frost buildup, and enhances the overall energy efficiency of the refrigerator. 

Symptoms of a failing fresh food door gasket include:

• Noticeable gaps between the gasket and the refrigerator frame
• Condensation or frost forming inside the refrigerator
• Increased energy consumption as the refrigerator works harder to maintain its internal temperature
• The door not closing properly or feeling loose

Causes of door gasket wear typically include normal aging, exposure to harsh cleaning chemicals, and frequent opening and closing of the refrigerator door, which can stretch and deform the gasket over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: white. It measures about 12 inches wide by 6 inches high.

The Freezer Door Shelf Bar is an OEM part compatible with GE refrigerators. This component serves as a support and retaining bar for the shelves located on the inside of the freezer door, ensuring they remain securely in place. This shelf bar measures 23” wide by 2” high and 5” deep

Symptoms that may indicate the need to replace the freezer door shelf bar include:

• Shelves becoming loose or falling out of the freezer door
• The bar itself becoming cracked, bent, or otherwise damaged

Causes of a faulty freezer door shelf bar can include physical impact or mishandling, excessive weight or force applied to the shelves, or general wear and tear over extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This reversible door plug covers the unused hinge or mounting hole after changing a door swing, restoring a clean appearance and helping keep out dirt and drafts. Simple, color-matched replacement for a neat finish. What it does:

• Covers exposed hinge or mounting holes on the door edge for a finished look
• Helps block dust, pests and drafts from entering through unused openings
• Matches original geometry to sit flush with the door surface
• Designed to work with reversible door installations where a hole is no longer used

• One (1) reversible door plug

• No tools are typically required; press plug into the unused hole until it seats securely
• Confirm correct orientation before installing to ensure a flush fit
• Inspect surrounding sealing surfaces and clean area before installation
• If plug is damaged or does not seat properly, replace with the exact part number

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

Color: white. Measures about 1/2 an inch wide by 2/3 of an inch high.

The Door Shelf Bar is an OEM part for GE refrigerators. This bar provides support and containment for items stored on the door shelves, helping to keep them organized and securely in place when the door is opened and closed. 

Over time, the door shelf bar can become damaged due to regular use, heavy items, or accidental impact. If the bar is broken or missing, it can result in items falling out of the door shelves and potentially breaking.

Symptoms of a bad door shelf bar include:

• Items falling out of the door shelves
• The bar being loose or not fitting properly
• Visible cracks or damage on the bar
• Difficulty keeping the door shelves organized

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Screw is an OEM replacement part for GE refrigerators. Countless screws are used throughout the refrigerator to securely hold parts in place.

Symptoms of a bad or missing screw can include:

• Rattling or vibration noises coming from inside the appliance 
• Doors or other parts that are no longer properly aligned
• Increased frost or cold air leaks due to compromised seals

Causes may include normal wear and tear over time, accidental damage or loss of a screw during repairs, or improper assembly leaving crucial screws omitted. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.

This plug button thimble is a small insulating part that supports and protects a push button or plug terminal, helping maintain a secure electrical connection and preventing wear or arcing. It restores proper button fit and function. What it does:

• Cushions and centers a push button or plug terminal for smooth operation
• Provides electrical insulation to reduce risk of shorting or arcing
• Helps keep the button/plug securely seated to prevent intermittent contact
• Commonly replaced when buttons wobble, stick, or have poor electrical connection

• Disconnect power to the appliance before attempting any repair.
• Replacement typically requires removing the control panel or button assembly; handle plastic parts carefully to avoid cracking.
• Verify orientation and seating before reassembling to ensure proper button movement.

This plug button is a small snap-in cap used on refrigerators to cover exposed holes on door handles, liners, or trim. It restores a clean, finished look while helping keep dust and moisture out of the cabinet.

• Snaps into a screw or access hole on a handle, liner, or trim panel
• Covers fasteners and gaps for a clean, finished appearance
• Helps block dirt and moisture from open holes
• Typical symptoms: missing cap, broken or loose plug, visible screw hole or cosmetic gap

• Unplug the appliance before servicing and use caution around sharp edges
• Align the plug with the hole and press straight in by hand until fully seated and flush
• For handle screw holes, tighten fasteners first, then install the cap
• Avoid using metal tools on finished surfaces to prevent scratches