Parts for Ge TBX12SNXBRWH: 01 - Doors Parts

Color: white. Measures about 2 inches high by 1 inch deep.

This screw handle secures an appliance handle to the door or panel, restoring a stable, properly aligned grip. It's a direct-fit replacement designed to stop handle wobble and keep the handle firmly attached during normal use. What it does

• Fastens the appliance handle to the door or access panel.
• Stops handle movement, wobbling, or shifting when pressure is applied.
• Helps restore safe, stable operation when the original screw or fastener is stripped or missing.
• Works with the original handle and mounting hardware when in good condition.

• Disconnect power to the appliance and follow all safety precautions before starting.
• Use the correct screwdriver or bit to avoid stripping the head.
• Thread carefully and tighten until snug; avoid over-tightening which can crack trim or strip threads.
• If surrounding hardware is damaged or the handle still moves, inspect the handle and mounting bracket for wear.

Replacement screw that secures appliance panels and internal components, restoring proper fit and helping prevent rattling or misalignment. Use this fastener when original screws are stripped, missing, or damaged to keep parts stable and secure. What it does:

• Secures panels, trim pieces, brackets and other components to maintain proper alignment and fit.
• Replaces stripped, corroded, or missing screws that can cause rattling, vibration, or loose parts.
• Restores stable mounting for service panels and access covers to reduce noise and movement during operation.
• Simple hardware replacement — helps prevent secondary damage caused by loose or shifted components.

• Disconnect power or gas (when applicable) before servicing to avoid shock or injury.
• Use the correct screwdriver or bit to avoid stripping the head; turn until snug—do not overtighten.
• Keep track of small parts and wear eye protection when working in tight spaces.
• If threads are damaged, replace with the correct OEM screw rather than forcing reuse.

This replacement handle mounting screw secures an appliance door or trim handle to the unit, restoring a solid fit and preventing wobble or rattling. Use it when the handle feels loose or the fastener is missing. What it does:

• Secures the handle to the door or trim so the handle stays firmly attached
• Stops handle movement, vibration, and noise caused by a loose fastener
• Replaces stripped, missing, or damaged mounting screws that prevent proper fit
• Restores safe, reliable operation of the handle assembly

• One handle mounting screw (quantity: 1)

• Turn off power to the appliance and remove any paneling as directed by the manufacturer before installing
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; do not overtighten to prevent cracking trim or stripping threads
• If threads are damaged, inspect mating hardware and replace as needed

This L-shaped shim is a small leveling/support part that stabilizes refrigerator components and helps maintain proper alignment. It replaces worn or missing shims to reduce rocking and keep doors closing evenly. What it does:

• Provides a stable spacer under brackets, legs, or panels to correct uneven gaps
• Helps stop appliance rocking and shifting on uneven floors
• Restores proper door/panel alignment when misalignment is caused by a missing or damaged shim
• Reduces vibration-related noise by securing loose mounting points

• One L-shaped shim

• Unplug the appliance or disconnect power before working in tight areas or moving it
• Position the shim where the original sat (under a bracket, leg, or mounting point) and verify fit before final placement
• Use basic hand tools as needed; avoid forcing parts into place
• Follow manufacturer safety guidance to prevent injury or damage

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.

You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.

Symptoms of a bad light socket include:

• The refrigerator light not turning on when the door is opened
• Flickering or intermittent light operation
• Visible damage or corrosion on the socket
• The light bulb not fitting securely or falling out

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.