Parts for Ge ABE21DGKARWS: Doors Parts

This freezer drawer gasket provides a replacement seal for a freezer drawer, helping restore a tight closure and maintain proper cold temperatures to keep frozen foods fresh. Fits replacement applications where the drawer seal is torn or worn. What it does:

• Creates a sealing barrier between the freezer drawer and cabinet to reduce air leaks
• Helps prevent frost buildup and moisture intrusion inside the drawer
• Restores proper drawer closure when the original gasket is cracked, torn, or deformed
• Reduces energy loss associated with a poor freezer seal

• Disconnect power to the appliance before beginning any service work
• Remove the old gasket and clean the gasket channel/mating surface thoroughly before installing
• Press the new gasket evenly into the channel, working around the entire drawer to ensure a uniform seal
• After installation, allow time for the gasket to settle and check the drawer closure for proper sealing; avoid using sharp tools that could damage the gasket

This replacement screw fastens refrigerator components securely, restoring a tight, rattle-free fit when original hardware is missing, stripped, or corroded. Use it to secure panels, brackets, or trim and keep parts properly aligned.

• Secures panels, brackets, covers, or trim in place
• Helps maintain correct alignment of components and hardware
• Reduces vibration and rattling caused by loose or missing screws
• Replaces lost, rusted, or stripped screws

• Unplug the refrigerator and turn off water supply if working near water components
• Match thread and length to the removed fastener; hand-start threads to avoid cross-threading
• Tighten snugly; do not overtighten into plastic or thin sheet metal
• Keep track of any spacers or washers reused from the original assembly

This white replacement door gasket seals the refrigerator compartment to help maintain proper cooling and prevent warm air from entering. Replacing a worn gasket restores a tighter seal for more efficient, reliable operation. What it does:

• Seals the refrigerator door to keep cold air inside and reduce energy loss
• Helps prevent frost buildup and condensation caused by air leaks
• Reduces temperature fluctuations that can affect food freshness
• Fits as the door perimeter seal where the original gasket has torn, warped, or lost flexibility

• One white refrigerator door gasket

• Remove power to the appliance before replacing the gasket to avoid electrical hazards
• Clean the door flange and allow it to dry before installing the new gasket for best adhesion and fit
• Warm or soften the new gasket (per OEM guidance) if necessary to ease installation and ensure a uniform seal

The Fastener Door Handle is an OEM component for GE refrigerators. This door handle provides a comfortable grip for accessing refrigerator shelves and bins. It attaches securely to the refrigerator door through durable metal fasteners. 

Causes for a bad door handle could be cracks, damage, or stripped fastener holes resulting in a loose or detached handle. Regularly gripping and lifting may also cause normal wear over time.

Symptoms of a failing door handle include:

• The handle detaching completely from the door  
• Looseness making the handle wobbly or unstable to hold
• Sharp edges or broken parts posing a safety risk

This OEM GE handle is also compatible with Hotpoint, RCA, and select Kenmore refrigerator models.

This stop door closes the refrigerator dispenser opening to help keep cold air in and protect the dispenser area from debris. Replacing a damaged stop door restores proper sealing and smooth dispenser operation. What it does:

• Seals the dispenser opening when not in use to reduce cold-air loss
• Helps prevent debris and pests from entering the dispenser chute
• Works with the dispenser actuator/lever to open and close the door during dispensing
• A worn or broken stop door can cause visible gaps, drafts, or debris falling into the dispenser

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser bezel or inner liner panels
• Handle the door carefully to avoid scratching or breaking the mounting tabs
• Verify proper alignment and actuator engagement before reassembling

The Hinge Bushing is an OEM part for GE refrigerators designed to fit within the hinge assembly of your refrigerator, providing support and smooth movement for the door.

A bad hinge bushing can be caused by regular wear and tear over time or damage due to mishandling or impact. If you notice that your refrigerator door is not opening or closing smoothly, or if it feels loose or wobbly, it may indicate a problem with the hinge bushing.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the refrigerator door
• Door not staying securely closed
• Door sagging or misaligning with the refrigerator frame

Replace your faulty hinge bushing with this genuine OEM part to restore your refrigerator door. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This full-width refrigerator door bin mounts to the inner door to hold bottles, jars, and condiments. Replace a cracked or missing bin to restore secure, organized door storage and help maintain your refrigerator's usable capacity.

• Attaches to the refrigerator door liner and provides additional shelf storage
• Helps organize items and keep them from tipping during door movement
• Replace if cracked, warped, or if mounting tabs are broken
• Symptoms include the bin falling off, not sitting level, or reduced door storage space

• Disconnect power and remove items from the affected door area before starting
• Lift out the damaged bin and clean the mounting area if needed
• Align the new bin's tabs/hooks with the door slots and press down until fully seated
• Verify the bin is secure before reloading items; distribute weight evenly

This door shelf module replaces a damaged or missing bin on your refrigerator door, restoring secure, organized storage for condiments, jars, and bottles. It snaps into the door liner to keep items accessible and in place.

• Provides on-door storage to hold bottles, jars, and condiments securely
• Replaces cracked or broken bins and restores usable door space
• Helps correct poor fit when mounting tabs are worn or broken
• Common symptoms: bin cracked, won't stay seated, sags, or items tip/fall

• Remove items from the existing bin and open the door fully
• Lift the old bin straight up to disengage it from the door rails or tabs
• Align the new module with the mounting slots, then lower/press until it locks in place
• Confirm a secure fit before reloading items

The Force Closure is an OEM part for GE refrigerators responsible for ensuring a secure and tight closure of the refrigerator door, keeping the cold air inside and maintaining proper temperature levels.

A bad force closure can be caused by normal wear and tear or damage due to mishandling or impact. If you notice that your refrigerator door is not closing properly or if there is a gap between the door and the refrigerator body, it may indicate a problem with the force closure.

Symptoms of a bad force closure include:

• Difficulty in fully closing the refrigerator door
• Door not staying securely closed
• Excessive condensation or frost buildup around the door seal
• Uneven or inconsistent cooling inside the refrigerator

Replace your faulty force closure with this OEM part to restore your refrigerator door. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This handle assembly replaces a worn, cracked, or missing refrigerator door handle to restore a secure grip and original appearance. It's the direct-fit replacement designed for a factory-like look and reliable daily use. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door
• Replaces cracked, loose, or broken door handles to improve safety and usability
• Restores the appliance's original appearance and alignment at the door edge
• Helps prevent accidental drops or spills caused by a failing handle

• Disconnect power or unplug the refrigerator before beginning any repair
• Remove contents or secure the door to prevent tipping when the handle is uninstalled
• Typical installation requires basic hand tools (screwdriver, socket) and careful alignment of mounting holes
• Do not overtighten fasteners; follow for torque specs and OEM instructions