Parts for Ge GIE18HSHGRSS: Doors Parts

The Freezer Door Shelf Bar is an OEM replacement part for GE refrigerators. It provides adjustable support for freezer door shelves and bins. Over time, the plastic bar can crack or break, causing shelving to collapse.  The bar measures approximately 22 3/4 inches in length, 2 inches in height, and 5 inches in depth. 

Causes of a bad shelf can include cracks or breaks from heavy loads, damage from impacts, or warping due to prolonged exposure to cold temperatures.

Symptoms of a bad shelf include:

• Cracks or visible damage to the shelf
• The shelf not fitting securely in place
• Difficulty in organizing or storing items due to an unstable shelf
• The shelf sagging or bending under weight

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Gasket Door FZ DG is an OEM part for GE freezers. This door gasket ensures a tight seal around the freezer door, preventing warm air from entering and cold air from escaping. Maintaining this seal is crucial for efficient cooling and energy usage.

Causes of a bad door gasket can include wear and tear over time, exposure to extreme temperatures, or physical damage from handling. A compromised gasket can lead to increased energy consumption and reduced cooling efficiency.

Symptoms of a bad door gasket include:

• Frost buildup inside the freezer
• Increased energy bills
• The freezer running continuously or more frequently
• Visible cracks, tears, or deformations in the gasket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This stop door is the replacement dispenser flap that helps control access to the ice/water chute, restoring proper door movement and helping prevent leaks or frost buildup at the dispenser area. What it does:

• Replaces a cracked, warped, or missing dispenser stop door that won't close properly
• Helps keep water and ice contained in the dispenser chute when not in use
• Prevents drafts and reduces frost or moisture buildup inside the dispenser opening
• Restores proper door alignment and smooth open/close action

• One stop door replacement

• Disconnect power to the appliance before replacing parts to avoid electric shock
• Remove the dispenser housing or trim panel per your model's service instructions to access the stop door
• Handle plastic parts gently to avoid cracking; verify proper seating and smooth operation after install

This door stop is the plastic hinge limiter that controls how far a refrigerator or freezer door opens, preventing over-rotation and helping the door align properly for a secure seal. Replaces a worn or broken stop to restore normal door movement. What it does:

• Limits door travel to prevent over-opening and contact damage
• Keeps door aligned to help maintain an effective gasket seal
• Prevents the hinge from binding or allowing the door to sag
• Commonly needed when the stop is cracked, chipped, or missing

• Basic hand tools required; part typically installs at the hinge area
• Disconnect power only if working near electrical components; otherwise power disconnect not usually required
• Handle plastic parts carefully to avoid cracking; align hinge before tightening fasteners

The Door Gasket is an OEM part for GE refrigerators. This gasket forms a seal around the refrigerator door, ensuring that the cold air remains inside and warm air stays out. By maintaining a proper seal, the door gasket helps in preserving the freshness of the food and contributes to the energy efficiency of the appliance.

Causes of a bad door gasket can include wear and tear over time, exposure to temperature fluctuations, or damage from cleaning chemicals. Physical damage such as cuts or tears can also compromise the gasket's effectiveness. Replacing a faulty door gasket is essential to maintain the refrigerator's performance and energy efficiency.

Symptoms of a bad door gasket include:

• Warm spots inside the refrigerator
• Excessive frost buildup
• The door not closing properly or staying shut
• Higher than usual energy bills due to increased cooling effort

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A replacement dairy compartment door that restores the small covered bin on the refrigerator door for storing butter, cheese and other small items. Provides a secure, easy-to-use cover to keep dairy items contained and protected. What it does

• Replaces a cracked, broken or missing dairy door so the covered door-bin can hold small items securely.
• Helps keep dairy products contained and reduces exposure to drafts on the refrigerator door.
• Restores normal opening/closing and snap-fit retention for the door bin cover.
• Compatible with standard door-bin mounting features (snap-on hinge/tab design).

• One dairy compartment door

• Remove food and items from the door bin before installing; no power required.
• Snap the door into the existing door-bin hinge/tabs until it clicks; verify secure fit.
• If tabs or hinge posts are damaged, replacement of those components may be required.
• Handle with care to avoid cracking plastic; use basic hand tools only if needed.

The Handle Mount is an OEM component specifically designed for GE French door refrigerators. It serves as the attachment point for refrigerator door handles.

The handle mount connects the handle assembly securely to the refrigerator door itself. Its sturdy construction manages stress from frequent usage while allowing for smooth operation.

Symptoms of a bad handle mount include:

• Loose, unstable, or detached door handles
• Handles difficult-to-operate or open doors with  
• Visible bending, cracks, or damage to the mount
• Reduced grip strength or door control

Causes can involve normal wear over extended periods, imprecise impacts, or repeated stress from heavy handling exceeding the mount’s limits. 

Replace with this genuine GE OEM part to restore a tight, lasting connection between handles and doors. Compatible also with Hotpoint, RCA, and Kenmore French door refrigerator models.
 

The Lower Refrigerator Door Shelf Bar is an OEM replacement part for GE refrigerators. It provides a storage solution on the inside of the refrigerator door. The shelf bar can hold condiments, sauces, or other small food items you need easy access to.

Causes of a bad shelf bar can include breakage from heavy loads, bent shelves from door impacts, or loose mounting brackets from normal wear over time.

Symptoms of a bad shelf bar include:

• Shelves that won't stay level or continuously slide down
• Areas of the shelf bar that are cracked, warped, or corroded
• Missing or broken mounting hardware

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Badge assembly that restores the exterior nameplate on compatible refrigerators, returning factory appearance and clear appliance identification. Ideal for replacing faded, cracked or missing emblems for a like-new finish. What it does:

• Restores the appliance's exterior identification and cosmetic finish where the original emblem is faded, cracked, or missing.
• Covers the mounting area and provides the finished look customers expect from the door surface.
• Matches factory styling so the appliance maintains a consistent, OEM appearance.
• Useful whenever visible badge damage detracts from the refrigerator's appearance.

• High-level surface-mount part—inspect the door surface and remove any old adhesive or residue before installing.
• Alignment is important; position carefully and press firmly to engage any snap-in tabs or adhesive backing.
• No electrical disconnection is typically required for exterior cosmetic badges, but avoid prying behind panels that expose wiring or components.

This is a refrigerator freezer door assembly that is stainless steel in color. This part includes the inner liner and the outer panel. Additional parts may be included. This is only the top freezer door. The door is very heavy and may require two people to lift it safely.A new refrigerator freezer door will be needed if it becomes dented or otherwise damaged in any way. This can happen if a sharp and heavy object makes a forceful impact on the door and dents it. Even if the door is operating properly, the owner may choose to replace it for cosmetic reasons. Be careful when lifting the original freezer door off of the hinges so that it isn't dropped, which could damage flooring or injure someone.As a genuine OEM part, it comes directly from the manufacturer. It is sold individually. This refrigerator freezer door is compatible with appliances that are manufactured by GE.

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.