Parts for Ge GTE16DTHBRWW: Doors Parts

This service common handle replaces a worn or broken handle to restore safe, reliable operation and improve the appliance's usability. It provides a direct-fit replacement for the original service handle. What it does

• Replaces a damaged or broken service handle so doors/panels can be opened and closed securely
• Restores proper grip and alignment for normal use
• Helps eliminate rattling or loose-handle symptoms caused by wear or damage
• Matches factory fit to maintain intended operation

• One service common handle (quantity: 1)

• Basic hand tools typically required; disconnect power or follow appliance-specific safety steps before starting
• Inspect mounting area and hardware; reuse or replace fasteners as needed
• Do not force parts; ensure correct alignment to avoid damaging mating components

The Freezer Door Shelf Bar is an OEM replacement part for GE refrigerators. It provides adjustable support for freezer door shelves and bins. Over time, the plastic bar can crack or break, causing shelving to collapse.  The bar measures approximately 22 3/4 inches in length, 2 inches in height, and 5 inches in depth. 

Causes of a bad shelf can include cracks or breaks from heavy loads, damage from impacts, or warping due to prolonged exposure to cold temperatures.

Symptoms of a bad shelf include:

• Cracks or visible damage to the shelf
• The shelf not fitting securely in place
• Difficulty in organizing or storing items due to an unstable shelf
• The shelf sagging or bending under weight

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Door Gasket is an OEM part for GE refrigerators. It is designed to create an airtight seal around the perimeter of the freezer door, which helps maintain the correct temperature and humidity levels inside the freezer compartment. This gasket is essential for preventing warm air from entering and cold air from escaping, ensuring energy efficiency and helping to keep food frozen and fresh.

Symptoms of a bad Freezer Door Gasket include:

• Frost buildup inside the freezer,
• Increased energy usage as the freezer works harder to maintain its temperature,
• Difficulty in maintaining consistent freezer temperatures,
• The freezer door feeling loose or not sealing properly.

Causes of gasket failure can include wear and tear over time, exposure to extreme temperatures, or accidental damage from cleaning or handling.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This freezer door stop is a small plastic bumper that cushions and limits the freezer door's travel to prevent over-extension and reduce slamming. It restores proper door positioning and helps protect the cabinet edge. What it does:

• Acts as a door bumper/stop so the freezer door closes and rests correctly
• Reduces slamming and wear on the door and cabinet edge
• Helps keep the door aligned during normal opening and closing
• Can resolve symptoms like a door that over-rotates, hits the cabinet, or doesn't seat cleanly

• One white freezer door stop

• Typically installs by snapping or sliding into the hinge/cabinet mounting location; verify orientation before pressing into place
• Turn power to the appliance off only if panel removal is required; this part is non-electrical
• Use basic hand tools if needed and avoid forcing the part to prevent breakage

The Gasket Door FF WW is an OEM part for GE refrigerators. This door gasket seals the perimeter of the refrigerator's fresh food compartment door, ensuring that cold air stays inside while keeping warm air out. A proper seal is essential for maintaining the refrigerator's efficiency, preventing energy waste, and keeping food fresh.

Causes of a bad gasket can include wear and tear from regular use, exposure to food spills or debris, or physical damage. A compromised gasket can lead to air leaks, causing the refrigerator to work harder to maintain the desired temperature.

Symptoms of a bad door gasket include:

• The refrigerator door not closing properly
• Visible cracks or tears in the gasket
• Condensation or frost buildup around the door seal
• Increased energy consumption and higher electricity bills

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dairy Door is an OEM part for GE refrigerators. It is located in the refrigerator compartment, often in the lower section of the door. It provides easy access to dairy items and helps to keep them organized and separate from other food items.

Causes of a damaged or worn-out dairy door can include regular use, accidental impact, or wear and tear over time. Signs of a faulty dairy door may include cracks, broken hinges, or difficulty in opening and closing.

Symptoms of a bad dairy door may include:

• Loose or sagging door
• Inability to securely hold dairy products
• Difficulty in accessing or retrieving items from the dairy compartment

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Refrigerator Door Shelf Rail is an OEM part for GE refrigerators. This component secures items on the refrigerator door shelves, preventing them from falling out when the door is opened or closed. The bar measures approximately 22” x 7”.

Common causes of a bad shelf rail include repeated impact from heavy items, cracking due to temperature fluctuations, or wear and tear from frequent use.

Symptoms of a bad refrigerator door shelf rail include:

• Items falling off the door shelf
• The rail appearing loose or unstable
• Visible cracks or breaks in the rail
• Difficulty in securely attaching the rail to the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

This kit replaces the mounting hardware that secures a refrigerator/freezer door handle to the door, restoring a solid, safe grip and clean appearance when the original fasteners are missing, damaged, or stripped.

• Provides the correct hardware to attach and secure the door handle
• Helps resolve loose, wobbly, or detached handles
• Replaces missing, damaged, or stripped handle fasteners
• Supports proper handle alignment and feel

• Disconnect power (and water, if applicable) and wear gloves.
• Support the handle while removing old hardware to prevent drops or scratches.
• Start threads by hand to avoid cross-threading; tighten evenly and do not overtighten.
• The handle is secure and the door opens/closes normally.

Badge assembly that restores the exterior nameplate on compatible refrigerators, returning factory appearance and clear appliance identification. Ideal for replacing faded, cracked or missing emblems for a like-new finish. What it does:

• Restores the appliance's exterior identification and cosmetic finish where the original emblem is faded, cracked, or missing.
• Covers the mounting area and provides the finished look customers expect from the door surface.
• Matches factory styling so the appliance maintains a consistent, OEM appearance.
• Useful whenever visible badge damage detracts from the refrigerator's appearance.

• High-level surface-mount part—inspect the door surface and remove any old adhesive or residue before installing.
• Alignment is important; position carefully and press firmly to engage any snap-in tabs or adhesive backing.
• No electrical disconnection is typically required for exterior cosmetic badges, but avoid prying behind panels that expose wiring or components.

This plug button is a small snap-in cap used on refrigerators to cover exposed holes on door handles, liners, or trim. It restores a clean, finished look while helping keep dust and moisture out of the cabinet.

• Snaps into a screw or access hole on a handle, liner, or trim panel
• Covers fasteners and gaps for a clean, finished appearance
• Helps block dirt and moisture from open holes
• Typical symptoms: missing cap, broken or loose plug, visible screw hole or cosmetic gap

• Unplug the appliance before servicing and use caution around sharp edges
• Align the plug with the hole and press straight in by hand until fully seated and flush
• For handle screw holes, tighten fasteners first, then install the cap
• Avoid using metal tools on finished surfaces to prevent scratches

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.