Parts for Ge GTE18ETHPRBB: Doors Parts

This replacement refrigerator handle restores a secure, comfortable grip for opening and closing the door or drawer. It's a simple way to fix a broken or loose handle and refresh your appliance's appearance.

• Attaches to the refrigerator to provide a stable handhold
• Replaces cracked, broken, missing, or wobbly handles
• Helps if the handle won't stay tight or keeps coming off
• Restores a clean, uniform look when the original is scuffed

• Disconnect power to the refrigerator for safety before beginning any repair
• Protect the door finish with a soft cloth; support the handle while loosening fasteners
• Transfer any end caps/trim from the old handle if applicable; align and tighten mounting hardware until snug
• Do not overtighten; verify smooth door/drawer operation after installation

The Freezer Door Shelf Bar is an OEM replacement part for GE refrigerators. It securely holds up to three adjustable shelves inside the freezer door for organized food storage.

Causes of a bad shelf bar can include damage from overloading shelves, long-term wear and tear from repeatedly loading and removing items, or improper cleaning techniques.

Symptoms of an issue include:

• Shelves sliding out of place due to a loose or unstable bar
• Unable to install shelves into the freezer door
• The bar bending or sagging excessively over time

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This freezer door gasket restores a tight, energy-saving seal between the freezer door and the cabinet. Replacing a worn or misshapen gasket helps stop air leaks that cause frost, moisture, and temperature fluctuations. What it does:

• Seals the perimeter of the freezer door to keep cold air in and warm air out
• Helps maintain proper freezer temperature and reduce energy waste
• Limits frost/ice buildup and condensation around the door opening
• Replaces gaskets that are torn, brittle, warped, or won't seal properly

• 1 dark gray freezer door gasket

• Disconnect power before servicing
• Unpack and lay the gasket flat; warm gently (hair dryer on low or warm water) to relax folds
• Clean and dry the door surface and gasket channel
• Press the gasket lip fully into the groove, ensuring corners seat evenly; close the door and check for uniform contact

This freezer door stop cushions and limits the door's travel to protect the hinge and cabinet edge, helping the door close smoothly and preventing over-travel damage. Fits black trim locations on compatible freezers. What it does:

• Acts as a bumper to stop the freezer door from swinging too far
• Cushions impact, reducing stress on hinge components and cabinet
• Helps the door align and close flush to maintain seal performance
• Common symptom fix: door hits cabinet, scrapes, or sits unevenly

• Remove any food/obstructions and support the door before replacing the stop
• Usually a simple snap-in or screw-on replacement; small hand tools may be required
• Inspect surrounding hinge and trim for damage when replacing
• Follow all safety precautions; unplug unit or disconnect power before performing extended service

The Fresh Food Door Gasket is an OEM part for GE refrigerators. This rubber-sealing gasket lines the perimeter of the fridge's fresh food compartment door. It creates an insulation barrier that helps maintain optimal interior temperatures.

Causes of a bad door gasket can include breaks, cracks, or compression set warping that occur from years of constant cooling and shutting. Exposure to food spills can degrade integrity over time as well.

Symptoms include: 

• Cold air feeling drafts around the door seal
• Condensation visible on door surfaces from air leaks   
• Noticeable temperature fluctuations inside the fridge section

This GE OEM replacement restores the critical moisture and cool air seal essential for refrigerator efficiency. Compatible with later produced Hotpoint, RCA, and Kenmore side-by-side models for a direct factory fit and performance enhancement. Rely on it to optimize energy usage and food freshness.
 

This flip-up dairy door covers the refrigerator's dairy compartment. Replace a cracked or missing cover to keep butter, cheese, and other small items organized and protected while restoring a clean, finished look to the fresh food door.

• Attaches to the dairy bin on the fresh food door and flips up/down for access
• Helps keep contents contained and protected during door opening/closing
• Restores proper hinge/latch engagement so the bin stays closed
• Common symptoms: cracked cover, broken hinge tabs, loose hinge, or missing door

• Empty the dairy bin and remove the old cover
• Align hinge tabs with the bin's pins and snap into place; no tools typically required
• Handle carefully; if very cold, let the plastic acclimate to room temperature before installation
• Open and close to confirm smooth operation and full seating

The Door Shelf Bar is an OEM part for GE refrigerators. This bar is located on the interior side of the refrigerator door. It provides support for items such as condiments, jars, or bottles. It helps to organize the refrigerator and prevent items from tipping or falling during the opening and closing of the door. The Door Shelf Bar is designed to withstand the weight of items placed on it and ensures they are held securely in place.

Causes of a bad Door Shelf Bar can include wear and tear, accidental damage, or improper weight distribution.

Symptoms of a bad Door Shelf Bar may include:

• Cracks or breakage in the bar.
• Difficulty in securely holding items.
• Limited storage capacity due to a damaged or missing bar.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This replacement door shelf bar restores the front rail on the refrigerator's fresh food door shelf, helping keep bottles and jars contained and organized when the door opens and closes.

• Forms the front rail of a fresh food door shelf to hold items in place
• Replaces a cracked, loose, or missing bar
• Snaps into the existing end slots on the door

• Remove items from the affected door shelf before replacement
• Align the bar with the door's end slots and press until it locks securely
• Always follow appliance safety practices; disconnect power if working near internal components

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

This kit replaces the mounting hardware that secures a refrigerator/freezer door handle to the door, restoring a solid, safe grip and clean appearance when the original fasteners are missing, damaged, or stripped.

• Provides the correct hardware to attach and secure the door handle
• Helps resolve loose, wobbly, or detached handles
• Replaces missing, damaged, or stripped handle fasteners
• Supports proper handle alignment and feel

• Disconnect power (and water, if applicable) and wear gloves.
• Support the handle while removing old hardware to prevent drops or scratches.
• Start threads by hand to avoid cross-threading; tighten evenly and do not overtighten.
• The handle is secure and the door opens/closes normally.

Badge assembly that restores the exterior nameplate on compatible refrigerators, returning factory appearance and clear appliance identification. Ideal for replacing faded, cracked or missing emblems for a like-new finish. What it does:

• Restores the appliance's exterior identification and cosmetic finish where the original emblem is faded, cracked, or missing.
• Covers the mounting area and provides the finished look customers expect from the door surface.
• Matches factory styling so the appliance maintains a consistent, OEM appearance.
• Useful whenever visible badge damage detracts from the refrigerator's appearance.

• High-level surface-mount part—inspect the door surface and remove any old adhesive or residue before installing.
• Alignment is important; position carefully and press firmly to engage any snap-in tabs or adhesive backing.
• No electrical disconnection is typically required for exterior cosmetic badges, but avoid prying behind panels that expose wiring or components.

This plug button thimble is a small control-panel insert that secures and centers push buttons, helping keep button caps in place and reducing moisture or debris entry. It restores proper button feel and alignment on the control panel. What it does:

• Centers and retains push-button caps so buttons press and release correctly
• Helps prevent dirt and spills from entering the control-panel opening
• Replaces a cracked, worn, or missing thimble that lets buttons wobble or fall inward
• Compatible with the original push-button assembly to restore original fit and function

• Simple, non-electrical replacement—power to the appliance is not required for this exterior part, but unplugging is recommended if removing trim near live components
• Remove the button cap first, press the old thimble out from the front or back as applicable, then press the new thimble into the panel opening until fully seated
• Inspect button cap and surrounding trim for damage; replace any damaged mating parts for best fit
• Use care to avoid scratching the control panel; keep small parts away from children

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.