Parts for Ge GTE18ISHJRSS: Doors Parts

The Stainless Steel Handle Set is an OEM replacement part for GE refrigerators. This comprehensive set includes both the refrigerator and freezer door handles, along with the necessary mounting hardware for a complete installation.

Symptoms of a bad Stainless Steel Handle Set include:

• Handles becoming loose or detached
• Difficulty in opening the refrigerator or freezer doors
• Visible wear, tarnish, or damage to the handles affects aesthetics and grip

Causes for a malfunctioning Stainless Steel Handle Set can include wear and tear from frequent use, mechanical issues with the attachment points, or environmental factors that affect the material's integrity.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Door Shelf Bar is an OEM replacement part for GE refrigerators. It securely holds up to three adjustable shelves inside the freezer door for organized food storage.

Causes of a bad shelf bar can include damage from overloading shelves, long-term wear and tear from repeatedly loading and removing items, or improper cleaning techniques.

Symptoms of an issue include:

• Shelves sliding out of place due to a loose or unstable bar
• Unable to install shelves into the freezer door
• The bar bending or sagging excessively over time

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This freezer door gasket restores a tight, energy-saving seal between the freezer door and the cabinet. Replacing a worn or misshapen gasket helps stop air leaks that cause frost, moisture, and temperature fluctuations. What it does:

• Seals the perimeter of the freezer door to keep cold air in and warm air out
• Helps maintain proper freezer temperature and reduce energy waste
• Limits frost/ice buildup and condensation around the door opening
• Replaces gaskets that are torn, brittle, warped, or won't seal properly

• 1 dark gray freezer door gasket

• Disconnect power before servicing
• Unpack and lay the gasket flat; warm gently (hair dryer on low or warm water) to relax folds
• Clean and dry the door surface and gasket channel
• Press the gasket lip fully into the groove, ensuring corners seat evenly; close the door and check for uniform contact

This stop door is the replacement dispenser flap that helps control access to the ice/water chute, restoring proper door movement and helping prevent leaks or frost buildup at the dispenser area. What it does:

• Replaces a cracked, warped, or missing dispenser stop door that won't close properly
• Helps keep water and ice contained in the dispenser chute when not in use
• Prevents drafts and reduces frost or moisture buildup inside the dispenser opening
• Restores proper door alignment and smooth open/close action

• One stop door replacement

• Disconnect power to the appliance before replacing parts to avoid electric shock
• Remove the dispenser housing or trim panel per your model's service instructions to access the stop door
• Handle plastic parts gently to avoid cracking; verify proper seating and smooth operation after install

This door stop is the plastic hinge limiter that controls how far a refrigerator or freezer door opens, preventing over-rotation and helping the door align properly for a secure seal. Replaces a worn or broken stop to restore normal door movement. What it does:

• Limits door travel to prevent over-opening and contact damage
• Keeps door aligned to help maintain an effective gasket seal
• Prevents the hinge from binding or allowing the door to sag
• Commonly needed when the stop is cracked, chipped, or missing

• Basic hand tools required; part typically installs at the hinge area
• Disconnect power only if working near electrical components; otherwise power disconnect not usually required
• Handle plastic parts carefully to avoid cracking; align hinge before tightening fasteners

The Fresh Food Door Gasket is an OEM part for GE refrigerators. This rubber-sealing gasket lines the perimeter of the fridge's fresh food compartment door. It creates an insulation barrier that helps maintain optimal interior temperatures.

Causes of a bad door gasket can include breaks, cracks, or compression set warping that occur from years of constant cooling and shutting. Exposure to food spills can degrade integrity over time as well.

Symptoms include: 

• Cold air feeling drafts around the door seal
• Condensation visible on door surfaces from air leaks   
• Noticeable temperature fluctuations inside the fridge section

This GE OEM replacement restores the critical moisture and cool air seal essential for refrigerator efficiency. Compatible with later produced Hotpoint, RCA, and Kenmore side-by-side models for a direct factory fit and performance enhancement. Rely on it to optimize energy usage and food freshness.
 

This flip-up dairy door covers the refrigerator's dairy compartment. Replace a cracked or missing cover to keep butter, cheese, and other small items organized and protected while restoring a clean, finished look to the fresh food door.

• Attaches to the dairy bin on the fresh food door and flips up/down for access
• Helps keep contents contained and protected during door opening/closing
• Restores proper hinge/latch engagement so the bin stays closed
• Common symptoms: cracked cover, broken hinge tabs, loose hinge, or missing door

• Empty the dairy bin and remove the old cover
• Align hinge tabs with the bin's pins and snap into place; no tools typically required
• Handle carefully; if very cold, let the plastic acclimate to room temperature before installation
• Open and close to confirm smooth operation and full seating

The Fresh Food Door Shelf Bar is an OEM part for GE refrigerators. This shelf bar provides a secure space for storing items like bottles, jars, and condiments. It helps maximize the storage capacity and keeps items organized and easily accessible.

Causes of a bad shelf bar can include regular wear and tear, overloading with heavy items, or physical damage from impacts. 

Symptoms of a bad fresh food door shelf bar include:

• Cracks or breaks in the shelf bar
• The shelf bar not fitting securely on the door
• Difficulty in holding items steadily
• The bar becoming loose or detaching from the door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement door shelf bar restores the front rail on the refrigerator's fresh food door shelf, helping keep bottles and jars contained and organized when the door opens and closes.

• Forms the front rail of a fresh food door shelf to hold items in place
• Replaces a cracked, loose, or missing bar
• Snaps into the existing end slots on the door

• Remove items from the affected door shelf before replacement
• Align the bar with the door's end slots and press until it locks securely
• Always follow appliance safety practices; disconnect power if working near internal components

The Handle Mount is an OEM component specifically designed for GE French door refrigerators. It serves as the attachment point for refrigerator door handles.

The handle mount connects the handle assembly securely to the refrigerator door itself. Its sturdy construction manages stress from frequent usage while allowing for smooth operation.

Symptoms of a bad handle mount include:

• Loose, unstable, or detached door handles
• Handles difficult-to-operate or open doors with  
• Visible bending, cracks, or damage to the mount
• Reduced grip strength or door control

Causes can involve normal wear over extended periods, imprecise impacts, or repeated stress from heavy handling exceeding the mount’s limits. 

Replace with this genuine GE OEM part to restore a tight, lasting connection between handles and doors. Compatible also with Hotpoint, RCA, and Kenmore French door refrigerator models.
 

The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door. 

Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.  

Symptoms of a bad Set Screw include:

• A loose refrigerator door handle, which may wobble or detach partially from the door.
• Difficulty in opening or closing the refrigerator door due to a lack of secure grip.
• The need to frequently retighten the door handle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This reversible door plug is a small trim cap that fills the unused holes on a refrigerator door after changing the door swing. It restores a clean, finished look and helps keep dust and moisture out.

• Covers unused hinge/handle screw holes created during a door reversal
• Press-fit cap designed to match lighter gray door trim
• Helps maintain appearance and reduce entry of dirt and moisture
• Replace if missing, cracked, discolored, or won't stay seated

• Disconnect power if removing or repositioning the door/hinges
• Use your model's parts diagram to confirm the plug location and color
• Align with the hole and press in by hand until flush with the surface
• Do not force; verify correct part if the plug will not seat properly

Badge assembly that restores the exterior nameplate on compatible refrigerators, returning factory appearance and clear appliance identification. Ideal for replacing faded, cracked or missing emblems for a like-new finish. What it does:

• Restores the appliance's exterior identification and cosmetic finish where the original emblem is faded, cracked, or missing.
• Covers the mounting area and provides the finished look customers expect from the door surface.
• Matches factory styling so the appliance maintains a consistent, OEM appearance.
• Useful whenever visible badge damage detracts from the refrigerator's appearance.

• High-level surface-mount part—inspect the door surface and remove any old adhesive or residue before installing.
• Alignment is important; position carefully and press firmly to engage any snap-in tabs or adhesive backing.
• No electrical disconnection is typically required for exterior cosmetic badges, but avoid prying behind panels that expose wiring or components.

This is a stainless-steel freezer door panel that restores the exterior finish and helps protect the freezer compartment. It's a direct-replacement outer door panel for compatible GE refrigerators, returning the appliance's look and function. What it does

• Replaces a dented, scratched or corroded outer freezer door panel to restore appearance
• Provides the finished stainless-steel surface that protects underlying structure
• Helps ensure a proper door seal by restoring correct door fit and alignment
• Common symptom: visible damage to or deterioration of the freezer door exterior

• One stainless-steel outer freezer door panel

• Basic removal of the door trim and fasteners is required; keep fasteners and trim organized for reinstallation
• Handle/trim and insulation may need to be transferred from the old panel
• Work with power off and the appliance empty of food; support the door during removal to avoid injury or damage

This part is a replacement door assembly. This part's intended use is to repair a broken or defective door assembly in refrigerators and freezers.The door of the appliance must be in good working order for temperatures to stay consistent and food items to remain cold. If the door is detached, loose, dented, or otherwise faulty, it will need to be immediately replaced. It's important that the appliance is unplugged before any attempt is made to replace this part. Work gloves are recommended for proper safety and protection.This is a genuine OEM part made by GE and has been sourced directly from the manufacturer. This is an authentic OEM replacement part made of high-quality materials. This door assembly can be used with different models of refrigerators and freezers that have been manufactured by General Electric, Hotpoint, RCA, and some other brands. It is sold individually.

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.