Parts for Ge GTR12SBEBSS: Doors Parts

This genuine replacement screw secures components and trim on compatible appliances, restoring proper fit and preventing loose parts. Use it to replace a lost or stripped fastener and keep panels and assemblies stable. What it does:

• Fastens trim, panels, brackets or internal components to the appliance chassis
• Restores secure attachment where a damaged or missing screw causes rattling or loose parts
• Helps maintain proper alignment of doors, panels or control assemblies
• Small, corrosion-resistant design for reliable long-term fastening

• Use the matching driver bit to avoid stripping the head; hand-start threads before using a driver
• Do not overtighten—stop when the part is snug and secure to avoid cracking panels or stripping threads
• Disconnect power and follow appliance-specific safety steps before accessing internal components
• If original hardware shows corrosion or thread damage, replace with the correct OEM fastener only

This reversible door hinge plug covers and protects the refrigerator door hinge for a finished look and to keep dirt and moisture out. It restores the hinge appearance and helps prevent debris buildup that can affect hinge movement. What it does:

• Snaps into the hinge opening to cover exposed hardware and mating surfaces
• Helps keep dust, grease, and moisture from collecting in the hinge area
• Restores a clean, finished appearance to the door edge
• Can reduce noise or rubbing caused by debris trapped at the hinge

• One reversible door hinge plug (plastic)

• Designed for simple push-in installation; align and press until it snaps into place
• No special tools typically required; use a soft cloth to protect surrounding surfaces
• Inspect hinge and mounting hardware for wear or damage before installing
• If the plug is brittle or damaged, replace to maintain protection and fit

This door stopper is a small rubber bumper that cushions and limits door travel to prevent impact damage and reduce noise. It restores proper door alignment and quiets slamming on compatible appliances. What it does:

• Absorbs impact when the door reaches its stop to prevent chipping or dents.
• Helps maintain correct door position and seal by limiting over-travel.
• Reduces vibration and noise from closing or banging doors.
• Commonly used where a soft, durable bumper is required on appliance doors.

• Inspect the mounting area and remove debris before installing the bumper.
• Press or slide the stopper into its locator until fully seated; some models may require a light tap.
• If fasteners are present on your model, secure with the original screw(s); do not overtighten.
• Disconnect power and follow the appliance manufacturer's safety instructions before working near electrical components.

Replacement door gasket that restores a tight seal on the freezer door to help keep cold air in and reduce frost buildup. Restores proper sealing to improve cooling consistency and help protect frozen food quality. What it does:

• Seals the freezer door to limit cold air loss and reduce warm-air infiltration.
• Helps prevent frost buildup and excessive ice formation inside the freezer.
• Can reduce temperature fluctuations that cause food to thaw or freezer to run more frequently.
• Common symptom indicators: visible gaps around the door, frost accumulation, or a freezer that runs continuously.

• Disconnect power and remove food and ice from the freezer before starting.
• Start at a corner and press the gasket into the door channel, working around the door for even seating.
• Inspect for gaps around the entire door after installation and adjust as needed.
• Follow OEM installation instructions for any model-specific steps or recommended seating techniques.

This refrigerator vegetable pan is the crisper drawer that holds fruits and vegetables in the fresh food compartment. Replace a cracked or missing bin to restore smooth operation and proper storage capacity.

• Stores produce in the crisper area of the refrigerator
• Slides on the shelf rails for easy access
• Replaces bins that are cracked, chipped, or have broken tabs
• Helps resolve sticking or misalignment caused by a deformed drawer

• Disconnect power before servicing interior parts
• Open doors fully and remove any items or obstructing bins
• Slide the old drawer out; align and slide the new drawer onto the correct rails until fully seated
• Check for smooth travel and proper fit before loading produce

This vegetable pan cover assembly replaces a cracked, warped or missing crisper cover to help keep produce contained and separated in the refrigerator. It restores the cover that sits over the vegetable/fruit drawer for normal use and appearance. What it does:

• Covers and protects the refrigerator vegetable/crisper pan, helping contain produce and spills.
• Helps maintain separation between crisper drawer and shelf space.
• Stops rattling or shifting caused by a broken or loose cover.
• Useful when the original cover is cracked, chipped, warped or missing.

• One vegetable pan cover assembly only.

• Remove stored food from the crisper area before installing.
• Typically snaps or slides into place; no special tools usually required. Inspect existing mounting points for damage.
• Handle carefully to avoid scratching or cracking the part during installation.

A replacement center hinge bushing that supports smooth door pivoting and helps keep refrigerator/freezer doors aligned. Restores proper door swing and reduces rubbing or uneven gaps for a better seal and operation. What it does:

• Guides the center hinge pin so the door opens and closes smoothly
• Helps maintain proper door alignment to prevent rubbing or sagging
• Reduces wear on the hinge pin and surrounding hinge surfaces
• Can help improve door sealing when misalignment is causing gaps

• One center hinge bushing

• Intended for the center/top door hinge; refer to your service manual for correct hinge orientation
• Remove power or follow appliance-specific safety steps before disassembling door/hinge
• Inspect hinge pin and surrounding parts for wear; replace damaged components as needed
• Use basic hand tools; do not force parts—replace per OEM guidance