Parts for Ge GTS16GSHMRSS: Doors Parts

The Stainless Steel Handle Set is an OEM replacement part for GE refrigerators. This comprehensive set includes both the refrigerator and freezer door handles, along with the necessary mounting hardware for a complete installation.

Symptoms of a bad Stainless Steel Handle Set include:

• Handles becoming loose or detached
• Difficulty in opening the refrigerator or freezer doors
• Visible wear, tarnish, or damage to the handles affects aesthetics and grip

Causes for a malfunctioning Stainless Steel Handle Set can include wear and tear from frequent use, mechanical issues with the attachment points, or environmental factors that affect the material's integrity.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Door Shelf Bar is an OEM replacement part for GE refrigerators. It provides adjustable support for freezer door shelves and bins. Over time, the plastic bar can crack or break, causing shelving to collapse.  The bar measures approximately 22 3/4 inches in length, 2 inches in height, and 5 inches in depth. 

Causes of a bad shelf can include cracks or breaks from heavy loads, damage from impacts, or warping due to prolonged exposure to cold temperatures.

Symptoms of a bad shelf include:

• Cracks or visible damage to the shelf
• The shelf not fitting securely in place
• Difficulty in organizing or storing items due to an unstable shelf
• The shelf sagging or bending under weight

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Gasket Door FZ DG is an OEM part for GE freezers. This door gasket ensures a tight seal around the freezer door, preventing warm air from entering and cold air from escaping. Maintaining this seal is crucial for efficient cooling and energy usage.

Causes of a bad door gasket can include wear and tear over time, exposure to extreme temperatures, or physical damage from handling. A compromised gasket can lead to increased energy consumption and reduced cooling efficiency.

Symptoms of a bad door gasket include:

• Frost buildup inside the freezer
• Increased energy bills
• The freezer running continuously or more frequently
• Visible cracks, tears, or deformations in the gasket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This freezer door stop replaces the damaged or worn bumper that cushions the freezer door, helping it close smoothly and preventing damage to the door or cabinet. Color-matched Dorian Gray finish. What it does:

• Cushions door movement to reduce banging and wear
• Helps the door seal more consistently by providing proper stopping position
• Reduces noise when opening or closing the freezer door
• Restores original fit and finish for a clean, finished appearance

• Basic hand tools may be required; follow the appliance manufacturer's instructions
• Power off and empty the door area if required for safe access before installing
• Inspect surrounding trim and mounting area; replace mounting screws if worn or damaged

This replacement refrigerator door stop cushions and limits door travel to help prevent slamming and misalignment. It restores smooth, controlled door movement and helps the door stay properly positioned for reliable sealing. What it does:

• Absorbs impact and reduces door slam noise when opening or closing
• Limits door travel to prevent over-rotation that can damage the cabinet or hinge
• Helps maintain proper door alignment for an effective seal
• Commonly used when a door slams, hangs open, or rubs against the cabinet

• Unplug the appliance or disconnect power before working near electrical components
• Support the door while removing or installing the stop to prevent it from shifting
• Use appropriate hand tools; do not force or overtighten fasteners

The Door gasket is an OEM replacement part for GE free-standing French door refrigerators. It sits around the perimeter of the refrigerator door as a replaceable seal between the door and the cabinet. The gasket creates an airtight barrier that helps maintain optimal temperatures within the refrigerator and freezer compartments.

Symptoms of a bad door gasket include:

• Cold air escaping from around the door seal
• Condensation building up or moisture accumulating at the perimeter
• The door not sealing shut properly or fitting flush against the cabinet
• Visible cracks or damage to the gasket material allow air and temperature leaks

Causes of a bad gasket include wear over time, compression damage from repeated closing of the door, or deterioration of the foam seal quality.

This OEM GE part is compatible with models featuring French door-style refrigerators also made by Hotpoint, RCA, and some Kenmore models.

The Dairy Door is an OEM part for GE refrigerators. It is located in the refrigerator compartment, often in the lower section of the door. It provides easy access to dairy items and helps to keep them organized and separate from other food items.

Causes of a damaged or worn-out dairy door can include regular use, accidental impact, or wear and tear over time. Signs of a faulty dairy door may include cracks, broken hinges, or difficulty in opening and closing.

Symptoms of a bad dairy door may include:

• Loose or sagging door
• Inability to securely hold dairy products
• Difficulty in accessing or retrieving items from the dairy compartment

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Refrigerator Door Shelf Rail is an OEM part for GE refrigerators. This component secures items on the refrigerator door shelves, preventing them from falling out when the door is opened or closed. The bar measures approximately 22” x 7”.

Common causes of a bad shelf rail include repeated impact from heavy items, cracking due to temperature fluctuations, or wear and tear from frequent use.

Symptoms of a bad refrigerator door shelf rail include:

• Items falling off the door shelf
• The rail appearing loose or unstable
• Visible cracks or breaks in the rail
• Difficulty in securely attaching the rail to the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This reversible door plug is a small trim cap that fills the unused holes on a refrigerator door after changing the door swing. It restores a clean, finished look and helps keep dust and moisture out.

• Covers unused hinge/handle screw holes created during a door reversal
• Press-fit cap designed to match lighter gray door trim
• Helps maintain appearance and reduce entry of dirt and moisture
• Replace if missing, cracked, discolored, or won't stay seated

• Disconnect power if removing or repositioning the door/hinges
• Use your model's parts diagram to confirm the plug location and color
• Align with the hole and press in by hand until flush with the surface
• Do not force; verify correct part if the plug will not seat properly

The Handle Mount is an OEM component specifically designed for GE French door refrigerators. It serves as the attachment point for refrigerator door handles.

The handle mount connects the handle assembly securely to the refrigerator door itself. Its sturdy construction manages stress from frequent usage while allowing for smooth operation.

Symptoms of a bad handle mount include:

• Loose, unstable, or detached door handles
• Handles difficult-to-operate or open doors with  
• Visible bending, cracks, or damage to the mount
• Reduced grip strength or door control

Causes can involve normal wear over extended periods, imprecise impacts, or repeated stress from heavy handling exceeding the mount’s limits. 

Replace with this genuine GE OEM part to restore a tight, lasting connection between handles and doors. Compatible also with Hotpoint, RCA, and Kenmore French door refrigerator models.
 

The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door. 

Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.  

Symptoms of a bad Set Screw include:

• A loose refrigerator door handle, which may wobble or detach partially from the door.
• Difficulty in opening or closing the refrigerator door due to a lack of secure grip.
• The need to frequently retighten the door handle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Badge assembly that restores the exterior nameplate on compatible refrigerators, returning factory appearance and clear appliance identification. Ideal for replacing faded, cracked or missing emblems for a like-new finish. What it does:

• Restores the appliance's exterior identification and cosmetic finish where the original emblem is faded, cracked, or missing.
• Covers the mounting area and provides the finished look customers expect from the door surface.
• Matches factory styling so the appliance maintains a consistent, OEM appearance.
• Useful whenever visible badge damage detracts from the refrigerator's appearance.

• High-level surface-mount part—inspect the door surface and remove any old adhesive or residue before installing.
• Alignment is important; position carefully and press firmly to engage any snap-in tabs or adhesive backing.
• No electrical disconnection is typically required for exterior cosmetic badges, but avoid prying behind panels that expose wiring or components.

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.