Parts for Ge GTS18DTNERWW: Doors Parts

This white plastic door handle replaces a broken or worn handle on compatible refrigerators, restoring a secure grip and a clean, factory look so you can open and close the door confidently.

• Provides the handhold used to open and close the refrigerator door
• Replaces cracked, broken, loose, or missing handles to improve safety and appearance
• Attaches to existing mounting points with model-specific fasteners or set screws
• Helps eliminate wobble or rattling caused by a damaged handle

• Disconnect power at the breaker before starting for safety
• Support the handle while loosening existing fasteners; note their positions and orientation
• Align the new handle; start screws by hand, then tighten evenly without overtightening
• If your model uses trim caps, install them after tightening

The Freezer Door Shelf Bar is an OEM replacement part for GE refrigerators. It provides adjustable support for freezer door shelves and bins. Over time, the plastic bar can crack or break, causing shelving to collapse.  The bar measures approximately 22 3/4 inches in length, 2 inches in height, and 5 inches in depth. 

Causes of a bad shelf can include cracks or breaks from heavy loads, damage from impacts, or warping due to prolonged exposure to cold temperatures.

Symptoms of a bad shelf include:

• Cracks or visible damage to the shelf
• The shelf not fitting securely in place
• Difficulty in organizing or storing items due to an unstable shelf
• The shelf sagging or bending under weight

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Door Gasket is an OEM part for GE refrigerators. It is designed to create an airtight seal around the perimeter of the freezer door, which helps maintain the correct temperature and humidity levels inside the freezer compartment. This gasket is essential for preventing warm air from entering and cold air from escaping, ensuring energy efficiency and helping to keep food frozen and fresh.

Symptoms of a bad Freezer Door Gasket include:

• Frost buildup inside the freezer,
• Increased energy usage as the freezer works harder to maintain its temperature,
• Difficulty in maintaining consistent freezer temperatures,
• The freezer door feeling loose or not sealing properly.

Causes of gasket failure can include wear and tear over time, exposure to extreme temperatures, or accidental damage from cleaning or handling.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This freezer door stop is a small plastic bumper that cushions and limits the freezer door's travel to prevent over-extension and reduce slamming. It restores proper door positioning and helps protect the cabinet edge. What it does:

• Acts as a door bumper/stop so the freezer door closes and rests correctly
• Reduces slamming and wear on the door and cabinet edge
• Helps keep the door aligned during normal opening and closing
• Can resolve symptoms like a door that over-rotates, hits the cabinet, or doesn't seat cleanly

• One white freezer door stop

• Typically installs by snapping or sliding into the hinge/cabinet mounting location; verify orientation before pressing into place
• Turn power to the appliance off only if panel removal is required; this part is non-electrical
• Use basic hand tools if needed and avoid forcing the part to prevent breakage

This refrigerator door stop cushions and limits the door swing to prevent over-travel and protect the cabinet and hinge. Durable plastic design restores proper door alignment and reduces slamming for a quieter, safer fridge. What it does

• Replaces a worn or broken door stop to stop the door from swinging too far.
• Helps prevent damage to the cabinet edge and hinge by absorbing impact.
• Reduces door noise and improves door alignment for a consistent seal.
• Commonly used where the original plastic stop is cracked, missing, or worn.

• One refrigerator door stop (white), as shown.

• Basic hand tools typically required; disconnect power only if working near electrical components.
• Keep original fasteners; replace only with like hardware if specified.
• Inspect surrounding hinge and mounting area for wear and replace if necessary.

The Gasket Door is an OEM replacement part for GE refrigerators. It is a crucial component responsible for creating an airtight seal between the refrigerator door and the cabinet. This gasket helps maintain the desired temperature inside the refrigerator, prevents air leaks, and enhances energy efficiency.  The gasket measures approximately 26.5 in. x 44 in.

Symptoms of a bad Gasket Door include:

• Difficulty closing the refrigerator door properly
• Air leaks causing the refrigerator to work harder to maintain the set temperature
• Condensation buildup on the inside of the refrigerator
• Increased energy consumption due to the refrigerator's inability to maintain optimal cooling

Causes of a bad gasket can include normal wear and tear over time, exposure to extreme temperatures, or damage from mishandling or improper cleaning. If the gasket becomes cracked, brittle, or loses its pliability, it can compromise the airtight seal, leading to inefficient cooling and potential food spoilage.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dairy Door is an OEM part for GE refrigerators. It is located in the refrigerator compartment, often in the lower section of the door. It provides easy access to dairy items and helps to keep them organized and separate from other food items.

Causes of a damaged or worn-out dairy door can include regular use, accidental impact, or wear and tear over time. Signs of a faulty dairy door may include cracks, broken hinges, or difficulty in opening and closing.

Symptoms of a bad dairy door may include:

• Loose or sagging door
• Inability to securely hold dairy products
• Difficulty in accessing or retrieving items from the dairy compartment

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Refrigerator Door Shelf Rail is an OEM part for GE refrigerators. This component secures items on the refrigerator door shelves, preventing them from falling out when the door is opened or closed. The bar measures approximately 22” x 7”.

Common causes of a bad shelf rail include repeated impact from heavy items, cracking due to temperature fluctuations, or wear and tear from frequent use.

Symptoms of a bad refrigerator door shelf rail include:

• Items falling off the door shelf
• The rail appearing loose or unstable
• Visible cracks or breaks in the rail
• Difficulty in securely attaching the rail to the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

This kit replaces the mounting hardware that secures a refrigerator/freezer door handle to the door, restoring a solid, safe grip and clean appearance when the original fasteners are missing, damaged, or stripped.

• Provides the correct hardware to attach and secure the door handle
• Helps resolve loose, wobbly, or detached handles
• Replaces missing, damaged, or stripped handle fasteners
• Supports proper handle alignment and feel

• Disconnect power (and water, if applicable) and wear gloves.
• Support the handle while removing old hardware to prevent drops or scratches.
• Start threads by hand to avoid cross-threading; tighten evenly and do not overtighten.
• The handle is secure and the door opens/closes normally.

The Lower Refrigerator Door Shelf Bar is an OEM replacement part for GE refrigerators. It provides a storage solution on the inside of the refrigerator door. The shelf bar can hold condiments, sauces, or other small food items you need easy access to.

Causes of a bad shelf bar can include breakage from heavy loads, bent shelves from door impacts, or loose mounting brackets from normal wear over time.

Symptoms of a bad shelf bar include:

• Shelves that won't stay level or continuously slide down
• Areas of the shelf bar that are cracked, warped, or corroded
• Missing or broken mounting hardware

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This plug button is a small snap-in cap used on refrigerators to cover exposed holes on door handles, liners, or trim. It restores a clean, finished look while helping keep dust and moisture out of the cabinet.

• Snaps into a screw or access hole on a handle, liner, or trim panel
• Covers fasteners and gaps for a clean, finished appearance
• Helps block dirt and moisture from open holes
• Typical symptoms: missing cap, broken or loose plug, visible screw hole or cosmetic gap

• Unplug the appliance before servicing and use caution around sharp edges
• Align the plug with the hole and press straight in by hand until fully seated and flush
• For handle screw holes, tighten fasteners first, then install the cap
• Avoid using metal tools on finished surfaces to prevent scratches

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.