Parts for Ge GTS18FMLBES: Doors Parts

Badge assembly that restores the exterior nameplate on compatible refrigerators, returning factory appearance and clear appliance identification. Ideal for replacing faded, cracked or missing emblems for a like-new finish. What it does:

• Restores the appliance's exterior identification and cosmetic finish where the original emblem is faded, cracked, or missing.
• Covers the mounting area and provides the finished look customers expect from the door surface.
• Matches factory styling so the appliance maintains a consistent, OEM appearance.
• Useful whenever visible badge damage detracts from the refrigerator's appearance.

• High-level surface-mount part—inspect the door surface and remove any old adhesive or residue before installing.
• Alignment is important; position carefully and press firmly to engage any snap-in tabs or adhesive backing.
• No electrical disconnection is typically required for exterior cosmetic badges, but avoid prying behind panels that expose wiring or components.

The Stainless Steel Handle Set is an OEM replacement part for GE refrigerators. This comprehensive set includes both the refrigerator and freezer door handles, along with the necessary mounting hardware for a complete installation.

Symptoms of a bad Stainless Steel Handle Set include:

• Handles becoming loose or detached
• Difficulty in opening the refrigerator or freezer doors
• Visible wear, tarnish, or damage to the handles affects aesthetics and grip

Causes for a malfunctioning Stainless Steel Handle Set can include wear and tear from frequent use, mechanical issues with the attachment points, or environmental factors that affect the material's integrity.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This fresh food door gasket replaces the worn seal around the refrigerator's fresh-food compartment door to restore an airtight seal, helping keep cold air in and reduce warm-air leaks that can cause frost or spoilage. What it does:

• Replaces torn, cracked, or deformed door gasket to restore proper door sealing.
• Helps prevent warm, moist air from entering the fresh-food compartment, which can lead to frost build-up and uneven cooling.
• Restores consistent compartment temperature for better food preservation and appliance performance.
• Can reduce strain from frequent compressor cycling caused by a failing door seal.

• Disconnect power to the appliance before beginning any service to avoid electrical shock.
• Remove the old gasket and clean the door channel of debris or adhesive before installing the new gasket.
• Start installation at a top corner and press the gasket firmly into the channel; warming the gasket slightly (hot water or low-heat hair dryer) can improve flexibility for easier seating.
• After installing, check the door alignment and seal at multiple points; allow time for the gasket to fully seat before judging fit.

This freezer door gasket creates a tight seal around the freezer door to help maintain cold temperatures and reduce frost buildup. Replacing a damaged gasket restores proper sealing and helps the freezer run efficiently. What it does:

• Seals the freezer door to keep cold air in and warm air out
• Helps reduce frost buildup and moisture inside the freezer
• Restores proper cooling when a cracked, torn, or deformed gasket is the cause
• Can improve energy efficiency by preventing air leaks

• Disconnect power to the appliance before starting any repair
• Remove the old gasket and clean the gasket channel and mating surfaces before installing
• Gasket requires gentle warming or careful stretching to seat; avoid excessive force
• Use non-marring tools and follow OEM instructions for any fasteners or retainer strips

The Door Rack is an OEM replacement part for GE refrigerators. It is designed to fit on the refrigerator door, providing storage space for bottles, jars, and other items.

A bad door rack can occur due to wear and tear, accidental damage, or misalignment. If you notice symptoms such as a cracked or broken rack, difficulty in storing items on the door, or items falling off the rack, it may indicate a need to replace the door shelf.

Signs of a faulty door rack include:

• Cracked or broken rack
• Difficulty in storing items on the door
• Items falling off the rack

Restore your refrigerator's door by replacing the faulty door rack with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This dairy bin cover replaces the removable lid that protects and separates dairy items in the refrigerator compartment, helping keep cheeses, butter and other dairy fresher and organized. Fits the dedicated dairy/covered bin area. What it does:

• Replaces a cracked, warped or missing dairy bin lid to restore a sealed cover for the dairy compartment
• Helps contain odors and protects dairy items from spills and cross-contamination
• Maintains proper placement and stacking of small dairy containers on the shelf
• Compatible with the refrigerator's dairy bin track and snaps into place when aligned

• Remove the old cover by lifting and sliding it out of the dairy bin track; align new cover and snap into place
• Handle with care to avoid cracking the plastic; do not force if resistance is felt
• Clean surfaces and remove food before installing; dishwasher use not recommended
• If fit is tight or hardware is damaged, inspect the dairy bin housing for wear before forcing installation

This shelf door half is a molded freezer door bin that restores storage and containment for small frozen items. The durable white finish replaces a cracked or missing half door to help organize freezer shelves. What it does:

• Replaces a broken or warped freezer door half so items stay contained on the shelf
• Restores a flush door seal area and prevents small items from falling out
• Matches factory-fit mounting points for proper alignment and operation
• Helps maintain neat shelf organization and easier access to stored food

• Unplug or disconnect power to the appliance before servicing
• Empty and remove items from the affected shelf area before installing
• Typically snaps or slides into existing mounting rails; may require gentle pressure to seat
• Keep original fasteners; if hardware is missing, a parts list for replacement fasteners

A small dovetail screw used to secure dovetail-style fittings and trim pieces on compatible appliances. Replaces a worn or missing fastener to restore a secure fit and proper alignment of the affected assembly. What it does:

• Fastens dovetail fittings and trim components to appliance housings or frames
• Keeps panels and trim aligned to prevent rattling or gaps
• Replaces stripped, bent, or missing screws that cause loose parts
• Useful when reassembling after repairs or part replacements

• Turn appliance power off when working near electrical components
• Use correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread damage or snapped screw
• If access requires removing panels, keep track of other fasteners and their locations for reassembly

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

This is a #8 x 9/16" pan head Phillips screw used to fasten trim, panels, and small components on compatible appliances. It replaces lost or damaged mounting screws to restore secure fittings and proper alignment. What it does:

• Secures plastic trim, panels, and brackets to appliance housings
• Provides a flush, rounded head for a clean finished appearance
• Phillips drive allows easy installation with common screwdrivers
• Resists loosening under normal appliance vibration

• Use the correct-size Phillips driver to avoid stripping the head
• Thread the screw in straight and tighten until snug; avoid over-tightening
• Replace any corroded or damaged screws to maintain secure attachments
• Disconnect power to the appliance before accessing internal components

This right-side refrigerator door corner cap in Dorian Gray replaces a cracked or missing trim piece to restore the door's finished appearance and help protect the edge from damage. Easy cosmetic replacement for worn or broken corners. What it does:

• Covers and protects the upper right corner of the refrigerator door, preventing exposure of the door edge
• Restores a clean, finished look after chips, cracks, or impact damage
• Helps keep the door gasket seating area visually intact by replacing damaged trim
• Matches Dorian Gray finish to blend with the existing door color

• One (1) right-side door corner cap in Dorian Gray, as shown

• High-level replacement: remove any damaged cap, snap or fasten the new cap into place; retain screws/clips if present
• Use basic hand tools (screwdriver, trim tool) and avoid excessive force when seating the cap
• Power off and empty nearby shelves if removing the door or hinge hardware for access

This left-corner refrigerator door cap restores the finished edge and appearance of the door in Dorian Gray. It covers the corner, protects the trim, and keeps the door looking neat after damage or wear. What it does:

• Replaces a cracked, chipped, or missing left corner trim piece to improve appearance
• Protects the door edge from further damage and hides exposed screw holes or rough edges
• Helps maintain a smooth seal area by preserving the outer trim profile
• Matches the Dorian Gray finish for consistent cosmetic restoration

• One left door corner cap (Dorian Gray)

• High-level snap-on/fasten replacement; may require removing nearby trim or loosening hinge hardware for access
• Use care to align tabs before pressing to avoid breaking clips
• Follow manufacturer instructions for disassembly; unplug the appliance or turn off power when working near electrical components