Parts for Ge GTS18HGNERBB: Doors Parts

This plastic BB handle replaces a worn or damaged refrigerator/freezer drawer or door handle so you can open and close it with a secure grip. Designed as a direct-fit exterior handle replacement for a clean, finished look. What it does:

• Replaces cracked, broken, or loose BB-style exterior handles
• Restores a secure grip for opening doors or drawers
• Keeps the appliance appearance consistent and functional
• Helps prevent further damage caused by using a damaged handle

• Disconnect power to the appliance before servicing to avoid electrical or injury risk
• Handle typically secures with mounting screws or retention clips; use appropriate screwdriver and keep hardware
• Align handle carefully to avoid scratching the appliance finish

The Freezer Door Shelf Bar is an OEM replacement part for GE refrigerators. It provides adjustable support for freezer door shelves and bins. Over time, the plastic bar can crack or break, causing shelving to collapse.  The bar measures approximately 22 3/4 inches in length, 2 inches in height, and 5 inches in depth. 

Causes of a bad shelf can include cracks or breaks from heavy loads, damage from impacts, or warping due to prolonged exposure to cold temperatures.

Symptoms of a bad shelf include:

• Cracks or visible damage to the shelf
• The shelf not fitting securely in place
• Difficulty in organizing or storing items due to an unstable shelf
• The shelf sagging or bending under weight

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Gasket Door FZ DG is an OEM part for GE freezers. This door gasket ensures a tight seal around the freezer door, preventing warm air from entering and cold air from escaping. Maintaining this seal is crucial for efficient cooling and energy usage.

Causes of a bad door gasket can include wear and tear over time, exposure to extreme temperatures, or physical damage from handling. A compromised gasket can lead to increased energy consumption and reduced cooling efficiency.

Symptoms of a bad door gasket include:

• Frost buildup inside the freezer
• Increased energy bills
• The freezer running continuously or more frequently
• Visible cracks, tears, or deformations in the gasket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This freezer door stop cushions and limits the door's travel to protect the hinge and cabinet edge, helping the door close smoothly and preventing over-travel damage. Fits black trim locations on compatible freezers. What it does:

• Acts as a bumper to stop the freezer door from swinging too far
• Cushions impact, reducing stress on hinge components and cabinet
• Helps the door align and close flush to maintain seal performance
• Common symptom fix: door hits cabinet, scrapes, or sits unevenly

• Remove any food/obstructions and support the door before replacing the stop
• Usually a simple snap-in or screw-on replacement; small hand tools may be required
• Inspect surrounding hinge and trim for damage when replacing
• Follow all safety precautions; unplug unit or disconnect power before performing extended service

The Door Gasket is an OEM part for GE refrigerators. This gasket forms a seal around the refrigerator door, ensuring that the cold air remains inside and warm air stays out. By maintaining a proper seal, the door gasket helps in preserving the freshness of the food and contributes to the energy efficiency of the appliance.

Causes of a bad door gasket can include wear and tear over time, exposure to temperature fluctuations, or damage from cleaning chemicals. Physical damage such as cuts or tears can also compromise the gasket's effectiveness. Replacing a faulty door gasket is essential to maintain the refrigerator's performance and energy efficiency.

Symptoms of a bad door gasket include:

• Warm spots inside the refrigerator
• Excessive frost buildup
• The door not closing properly or staying shut
• Higher than usual energy bills due to increased cooling effort

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dairy Door is an OEM part for GE refrigerators. It is located in the refrigerator compartment, often in the lower section of the door. It provides easy access to dairy items and helps to keep them organized and separate from other food items.

Causes of a damaged or worn-out dairy door can include regular use, accidental impact, or wear and tear over time. Signs of a faulty dairy door may include cracks, broken hinges, or difficulty in opening and closing.

Symptoms of a bad dairy door may include:

• Loose or sagging door
• Inability to securely hold dairy products
• Difficulty in accessing or retrieving items from the dairy compartment

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Refrigerator Door Shelf Rail is an OEM part for GE refrigerators. This component secures items on the refrigerator door shelves, preventing them from falling out when the door is opened or closed. The bar measures approximately 22” x 7”.

Common causes of a bad shelf rail include repeated impact from heavy items, cracking due to temperature fluctuations, or wear and tear from frequent use.

Symptoms of a bad refrigerator door shelf rail include:

• Items falling off the door shelf
• The rail appearing loose or unstable
• Visible cracks or breaks in the rail
• Difficulty in securely attaching the rail to the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

This kit replaces the mounting hardware that secures a refrigerator/freezer door handle to the door, restoring a solid, safe grip and clean appearance when the original fasteners are missing, damaged, or stripped.

• Provides the correct hardware to attach and secure the door handle
• Helps resolve loose, wobbly, or detached handles
• Replaces missing, damaged, or stripped handle fasteners
• Supports proper handle alignment and feel

• Disconnect power (and water, if applicable) and wear gloves.
• Support the handle while removing old hardware to prevent drops or scratches.
• Start threads by hand to avoid cross-threading; tighten evenly and do not overtighten.
• The handle is secure and the door opens/closes normally.

The Lower Refrigerator Door Shelf Bar is an OEM replacement part for GE refrigerators. It provides a storage solution on the inside of the refrigerator door. The shelf bar can hold condiments, sauces, or other small food items you need easy access to.

Causes of a bad shelf bar can include breakage from heavy loads, bent shelves from door impacts, or loose mounting brackets from normal wear over time.

Symptoms of a bad shelf bar include:

• Shelves that won't stay level or continuously slide down
• Areas of the shelf bar that are cracked, warped, or corroded
• Missing or broken mounting hardware

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This black emblem badge restores the appliance's front appearance by replacing a faded, scratched, or missing logo accent. It provides a clean, finished look so the appliance matches its original styling. What it does:

• Replaces a worn or missing badge to restore factory appearance
• Hides cosmetic damage on the control bezel or exterior trim
• Helps maintain resale value and consistent styling across the appliance lineup
• Visible cosmetic part only — does not affect appliance function

• One black emblem badge

• Clean and dry the mounting area before installing to ensure proper fit
• Align carefully before seating; some badges press into place or adhere to the surface
• Use caution around sharp edges and disconnect power when working near electrical components

This plug button thimble is a small control-panel insert that secures and centers push buttons, helping keep button caps in place and reducing moisture or debris entry. It restores proper button feel and alignment on the control panel. What it does:

• Centers and retains push-button caps so buttons press and release correctly
• Helps prevent dirt and spills from entering the control-panel opening
• Replaces a cracked, worn, or missing thimble that lets buttons wobble or fall inward
• Compatible with the original push-button assembly to restore original fit and function

• Simple, non-electrical replacement—power to the appliance is not required for this exterior part, but unplugging is recommended if removing trim near live components
• Remove the button cap first, press the old thimble out from the front or back as applicable, then press the new thimble into the panel opening until fully seated
• Inspect button cap and surrounding trim for damage; replace any damaged mating parts for best fit
• Use care to avoid scratching the control panel; keep small parts away from children

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.