Parts for Ge GTS19KYNBRFS: Doors Parts

The Stainless Steel Handle Set is an OEM replacement part for GE refrigerators. This comprehensive set includes both the refrigerator and freezer door handles, along with the necessary mounting hardware for a complete installation.

Symptoms of a bad Stainless Steel Handle Set include:

• Handles becoming loose or detached
• Difficulty in opening the refrigerator or freezer doors
• Visible wear, tarnish, or damage to the handles affects aesthetics and grip

Causes for a malfunctioning Stainless Steel Handle Set can include wear and tear from frequent use, mechanical issues with the attachment points, or environmental factors that affect the material's integrity.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Shelf is an OEM replacement part for GE refrigerators. It is designed to provide storage space on the refrigerator door, allowing you to conveniently store and access frequently used items.

A bad door shelf can occur due to wear and tear, damage, or misalignment. If you notice symptoms such as a cracked or broken shelf, difficulty in storing items on the door, or items falling off the shelf, it may indicate a need to replace the door shelf.

Signs of a faulty door shelf include:

• Cracked or broken shelf
• Difficulty in storing items on the door
• Items falling off the shelf

Restore your refrigerator's door by replacing the faulty door shelf with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This freezer door gasket seals the freezer door to help maintain proper temperature and reduce frost buildup. Replacing a worn or torn gasket restores the door seal for more consistent cooling and energy use. What it does:

• Creates an airtight seal around the freezer door to help keep cold air in and warm, moist air out
• Stops or reduces frost accumulation and condensation caused by a failing seal
• Helps the freezer maintain set temperature more reliably and can reduce compressor cycling
• Use when the existing gasket is torn, warped, compressed, or no longer seals evenly

• Disconnect power to the appliance before beginning any work and follow the manufacturer's safety recommendations
• Remove the old gasket, clean the gasket channel thoroughly, then align the new gasket starting from one corner and press it into the channel
• If gasket is stiff, warm it slightly (hand-warm or a hair dryer on low) to make installation easier—avoid overheating
• After installation, check the door seal around the entire perimeter and adjust or reseat as needed for an even contact

This freezer door stop replaces the damaged or worn bumper that cushions the freezer door, helping it close smoothly and preventing damage to the door or cabinet. Color-matched Dorian Gray finish. What it does:

• Cushions door movement to reduce banging and wear
• Helps the door seal more consistently by providing proper stopping position
• Reduces noise when opening or closing the freezer door
• Restores original fit and finish for a clean, finished appearance

• Basic hand tools may be required; follow the appliance manufacturer's instructions
• Power off and empty the door area if required for safe access before installing
• Inspect surrounding trim and mounting area; replace mounting screws if worn or damaged

This replacement refrigerator door stop cushions and limits door travel to help prevent slamming and misalignment. It restores smooth, controlled door movement and helps the door stay properly positioned for reliable sealing. What it does:

• Absorbs impact and reduces door slam noise when opening or closing
• Limits door travel to prevent over-rotation that can damage the cabinet or hinge
• Helps maintain proper door alignment for an effective seal
• Commonly used when a door slams, hangs open, or rubs against the cabinet

• Unplug the appliance or disconnect power before working near electrical components
• Support the door while removing or installing the stop to prevent it from shifting
• Use appropriate hand tools; do not force or overtighten fasteners

This fresh food door gasket seals the refrigerator compartment to keep cold air in and warm air out. The Dorian Gray color matches compatible units while helping maintain stable temperatures and reducing moisture at the door edge. What it does:

• Creates an airtight seal around the fresh food door to prevent air leaks
• Helps maintain proper compartment temperature and humidity
• Reduces condensation, frost, and warm spots near the door opening
• Common failure signs: gaps, cracks/tears, warped corners, or the door not closing/sealing properly

• 1 fresh food door gasket in Dorian Gray

• Disconnect power before servicing; clear items from the door for easier handling
• Warm the new gasket (soak in warm water or use a hair dryer on low) to relax and improve fit
• Press the gasket fully into the door channel; ensure corners seat evenly without twists
• After installation, close the door to help the gasket conform; check for an even seal and adjust door alignment if needed

This dairy door replaces the removable butter/dairy compartment on compatible refrigerator doors, restoring a covered shelf for small items and helping keep dairy products contained and organized. What it does:

• Replaces a cracked, broken or missing dairy/butter compartment door
• Provides a covered shelf that helps keep small containers and dairy items from falling out
• Restores the door's appearance and functional storage on the refrigerator door
• Suitable when the existing dairy door won't stay closed or is damaged

• One dairy door (30-inch)

• Snap-in/screw-mount installation — handle parts and mounting features may vary by model
• Remove food and any shelves from the door area before installing
• Use gentle pressure to align tabs; do not force to avoid cracking the new part
• Disconnect power only if required for access per your model's service instructions

This modular refrigerator door bin—sometimes called a door shelf bin—replaces a cracked or missing bin on the door, restoring secure, convenient storage for condiments, jars, and bottles. It locks into the door rails for a stable fit. What it does

• Provides on-door storage and organization for frequently used items
• Replaces bins that are cracked, warped, broken, or missing
• Helps keep containers upright and reduces items sliding off when the door opens
• Addresses a bin that won't stay seated due to damaged bin tabs

• 1 modular door bin

• Remove items from the old bin; lift up to disengage and pull out
• Align the new bin's hooks with the door slots and press down until fully seated
• Confirm the bin is level and secure before loading; avoid overloading
• Typically installs without tools

The Fresh Food Door Shelf is an OEM replacement part for GE refrigerators. It is designed to provide storage space on the fresh food door, allowing you to keep commonly used items within easy reach.

A faulty fresh food door shelf can occur due to wear and tear, damage, or misalignment. If you notice symptoms such as a cracked or broken shelf, difficulty in storing items on the door, or items falling off the shelf, it may indicate a need to replace the fresh food door shelf.

Signs of a faulty fresh food door shelf include:

• Cracked or broken shelf
• Difficulty in storing items on the door
• Items falling off the shelf

Restore your refrigerator's fresh food door by replacing the faulty door shelf with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This reversible door plug is a small trim cap that fills the unused holes on a refrigerator door after changing the door swing. It restores a clean, finished look and helps keep dust and moisture out.

• Covers unused hinge/handle screw holes created during a door reversal
• Press-fit cap designed to match lighter gray door trim
• Helps maintain appearance and reduce entry of dirt and moisture
• Replace if missing, cracked, discolored, or won't stay seated

• Disconnect power if removing or repositioning the door/hinges
• Use your model's parts diagram to confirm the plug location and color
• Align with the hole and press in by hand until flush with the surface
• Do not force; verify correct part if the plug will not seat properly

This handle mount bushing supports and spaces a refrigerator door handle on its mounting stud, keeping the handle aligned and secure. Replace a cracked or missing bushing to eliminate wobble and restore a tight, flush handle fit.

• Centers the door handle on its mounting stud/post
• Maintains proper spacing so the handle sits flush to the door
• Provides a solid seat for handle fasteners to hold securely
• Failure can cause a loose, wobbly, or misaligned handle

• Open the door and support the handle; protect the finish with tape or a cloth
• Loosen the handle fasteners (set screws or similar) and lift the handle off the studs
• Remove the damaged bushing; seat the new bushing fully on the stud or in the handle base
• Reinstall and align the handle; tighten fasteners evenly without overtightening

This set screw secures refrigerator components—most commonly door handles—to their mounting studs. Replacing a missing or stripped screw restores a solid, secure feel and helps prevent loose or wobbly handles.

• Locks the handle to its mounting stud to keep it tight and secure
• Helps resolve a loose, wobbly, sliding, or rattling handle
• Replaces a missing, rounded, or damaged set screw
• Helps maintain proper handle alignment and consistent door operation

• Unplug the appliance or switch off power before servicing
• Ensure the handle is fully seated on the studs before tightening
• Start the screw by hand to avoid cross-threading; then tighten until snug
• Do not overtighten to prevent stripping the screw or handle threads

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.