Parts for Ge GTS21FGKDWW: Doors Parts

This badge is the small decorative nameplate used on the appliance exterior to display the manufacturer's emblem. It restores factory appearance and covers the original mounting location for a clean, finished look. What it does

• Replaces a damaged, faded, or missing exterior emblem to restore the appliance's original look
• Snaps or adheres into the existing badge location for a factory-correct appearance
• Helps identify the appliance visually without affecting function
• Common symptom: missing, scratched, or peeled badge on the appliance front

• One replacement badge/nameplate (exact fit for the listed part number)

• Installation is typically simple: align badge with mounting location and press into place; adhesive backing or snap clips may be used depending on model
• Clean mounting surface before installing to ensure good adhesion
• Use gentle pressure; avoid sharp tools that could scratch the finish
• If clips break during removal, replace clips only if explicitly listed as included

This service common handle replaces a worn or broken handle to restore safe, reliable operation and improve the appliance's usability. It provides a direct-fit replacement for the original service handle. What it does

• Replaces a damaged or broken service handle so doors/panels can be opened and closed securely
• Restores proper grip and alignment for normal use
• Helps eliminate rattling or loose-handle symptoms caused by wear or damage
• Matches factory fit to maintain intended operation

• One service common handle (quantity: 1)

• Basic hand tools typically required; disconnect power or follow appliance-specific safety steps before starting
• Inspect mounting area and hardware; reuse or replace fasteners as needed
• Do not force parts; ensure correct alignment to avoid damaging mating components

The Fresh Food Door Gasket is an OEM component specifically designed for GE side-by-side refrigerators. This gasket creates a tight seal around the perimeter of the fresh food door to contain cool air inside the refrigerator compartment.  

Causes of a bad gasket include wear and tear over time, damage from overtightening the door, or impact/warping of the gasket frame.

Symptoms of a bad fresh food door gasket include:

• Cool air leaking from the fridge and warmer temperatures inside 
• Frost or condensation building up inside the door walls
• The door not sealing properly
• Higher energy bills

Replace yours with this genuine GE part to restore proper insulation, prevent warm air exchange, and improve cooling efficiency. This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This freezer door gasket creates an airtight barrier between the door and cabinet. Replacing a worn gasket restores a tight closure to help maintain proper temperatures while reducing frost and moisture around the door opening.

• Forms a continuous seal to keep cold air in and humid air out
• Helps stabilize freezer temperature and reduce frost/ice buildup
• Can address condensation near the door, warm spots, or a door that won't seal/close properly
• Replace if the original is cracked, torn, warped, or permanently compressed

• Disconnect power before servicing and clear items that obstruct access.
• Lay the new gasket flat to relax; warm gently with a hair dryer on low or soak in warm water to remove kinks.
• Remove the old gasket; press the new gasket fully into the retainer/channel, ensuring corners seat evenly (loosen liner screws if applicable).
• Close the door and check for uniform contact all around; adjust alignment and recheck after the unit cools.

This replacement gallon door bin restores a refrigerator door shelf designed to hold large bottles and containers securely, keeping them organized and easy to reach. It replaces cracked or missing door storage to maintain usable door capacity. What it does:

• Provides a sturdy lower door shelf for storing gallon-sized bottles and tall containers
• Keeps items upright and prevents shifting or tipping when the door opens
• Restores lost or damaged door storage after cracks, breaks, or wear
• Fits into the door rail system and locks into place at the designated mounting points

• One gallon door bin

• Remove all items from the door and open the door fully before beginning
• Align the bin tabs with the door retainer slots and press firmly until it snaps into place
• If old mounting clips are damaged, inspect and replace them before installing the new bin
• No electrical work is required.

This clear plastic refrigerator door rack provides a replacement shelf for holding bottles, condiments and other items on the door. Restores usable storage and a finished look when the original rack is cracked or missing. What it does:

• Replaces a cracked, chipped or broken door shelf so items no longer fall out or tip
• Provides a clear, low-profile storage area for bottles, jars and small containers
• Matches OEM fit and finish for a seamless appearance and proper retention
• Suitable for single-side door rack openings where a clear plastic bin is specified

• Remove all contents from the door before replacing the rack
• Align rack with door supports and press into place until securely seated
• Handle carefully to avoid scratching the clear plastic during installation
• Refer to the refrigerator owner's manual for model-specific removal and installation instructions

The Dairy Lid is an OEM part for GE refrigerators. This clear lid is designed to fit on the dairy drawer of your GE refrigerator, providing a convenient storage solution for dairy products. It helps to maintain the freshness of your dairy items while keeping them protected from cross-contamination and odors in the refrigerator.

Symptoms of a bad dairy drawer lid include:

• Cracks or damage
• Lid not closing securely
• Dairy items not staying fresh

A bad dairy drawer lid can occur due to wear and tear, accidental damage, or other factors. If you notice symptoms such as cracks, damage, or the lid not closing securely, it may be time to replace the dairy drawer lid.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Door Rack is an OEM replacement part for GE refrigerators. It is designed to fit on the refrigerator door, providing storage space for bottles, jars, and other items.

A bad door rack can occur due to wear and tear, accidental damage, or misalignment. If you notice symptoms such as a cracked or broken rack, difficulty in storing items on the door, or items falling off the rack, it may indicate a need to replace the door shelf.

Signs of a faulty door rack include:

• Cracked or broken rack
• Difficulty in storing items on the door
• Items falling off the rack

Restore your refrigerator's door by replacing the faulty door rack with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This door handle fastener secures the appliance door handle to the door assembly, restoring a tight, stable grip. Use it when a handle feels loose, wobbles, or won't stay firmly attached. What it does:

• Secures the door handle to the door bracket or mounting post
• Prevents handle wobble, looseness, or partial detachment
• Restores normal handle function after a missing or worn fastener
• Helps keep the handle aligned for safe opening and closing

• 1 door handle fastener

• Disconnect power or unplug the appliance before starting any work
• Remove the handle trim or cover as needed to access the fastener
• Use appropriate hand tools and keep small parts contained to avoid loss

This thimble door replaces a damaged or discolored inner door on compatible GE laundry appliances, restoring a clean appearance and proper fit so the main door closes and seals correctly. What it does:

• Replaces a cracked, warped or broken thimble door that can prevent the main door from closing
• Helps maintain a snug fit between the main door and the cabinet to reduce gaps
• Reduces risk of rubbing damage to the door seal and visible cabinet finish
• Useful when the existing thimble is chipped, faded or otherwise cosmetically damaged

• Disconnect power to the appliance before starting any repair
• Minimal hand tools are typically required; follow the appliance service manual for disassembly/reassembly steps
• Handle edges carefully to avoid damaging the new part or surrounding trim

This plug button is a small snap-in cap used on refrigerators to cover exposed holes on door handles, liners, or trim. It restores a clean, finished look while helping keep dust and moisture out of the cabinet.

• Snaps into a screw or access hole on a handle, liner, or trim panel
• Covers fasteners and gaps for a clean, finished appearance
• Helps block dirt and moisture from open holes
• Typical symptoms: missing cap, broken or loose plug, visible screw hole or cosmetic gap

• Unplug the appliance before servicing and use caution around sharp edges
• Align the plug with the hole and press straight in by hand until fully seated and flush
• For handle screw holes, tighten fasteners first, then install the cap
• Avoid using metal tools on finished surfaces to prevent scratches

This is a #8 x 9/16" pan head Phillips screw used to fasten trim, panels, and small components on compatible appliances. It replaces lost or damaged mounting screws to restore secure fittings and proper alignment. What it does:

• Secures plastic trim, panels, and brackets to appliance housings
• Provides a flush, rounded head for a clean finished appearance
• Phillips drive allows easy installation with common screwdrivers
• Resists loosening under normal appliance vibration

• Use the correct-size Phillips driver to avoid stripping the head
• Thread the screw in straight and tighten until snug; avoid over-tightening
• Replace any corroded or damaged screws to maintain secure attachments
• Disconnect power to the appliance before accessing internal components

This right-hand door cap is a replacement trim piece that restores the finished edge and basic protection to the door assembly. It helps maintain proper door fit and appearance for compatible GE appliances. What it does:

• Covers and protects the outer edge of the door to prevent dirt intrusion and wear
• Secures/finishes the door trim where the hinge or latch meets the cabinet
• Can address visible damage, loose trim, or minor alignment issues related to the cap
• Restores factory appearance and helps maintain proper door sealing

• Disconnect power to the appliance before beginning any repair.
• Removal/installation typically requires basic hand tools (screwdriver); support the door to avoid stress on hinges.
• Keep fasteners and small parts organized; check fit and alignment before final tightening.