Parts for Ge GTS21FSKCSS: Doors Parts

Badge assembly that restores the exterior nameplate on compatible refrigerators, returning factory appearance and clear appliance identification. Ideal for replacing faded, cracked or missing emblems for a like-new finish. What it does:

• Restores the appliance's exterior identification and cosmetic finish where the original emblem is faded, cracked, or missing.
• Covers the mounting area and provides the finished look customers expect from the door surface.
• Matches factory styling so the appliance maintains a consistent, OEM appearance.
• Useful whenever visible badge damage detracts from the refrigerator's appearance.

• High-level surface-mount part—inspect the door surface and remove any old adhesive or residue before installing.
• Alignment is important; position carefully and press firmly to engage any snap-in tabs or adhesive backing.
• No electrical disconnection is typically required for exterior cosmetic badges, but avoid prying behind panels that expose wiring or components.

The Stainless Steel Handle Set is an OEM replacement part for GE refrigerators. This comprehensive set includes both the refrigerator and freezer door handles, along with the necessary mounting hardware for a complete installation.

Symptoms of a bad Stainless Steel Handle Set include:

• Handles becoming loose or detached
• Difficulty in opening the refrigerator or freezer doors
• Visible wear, tarnish, or damage to the handles affects aesthetics and grip

Causes for a malfunctioning Stainless Steel Handle Set can include wear and tear from frequent use, mechanical issues with the attachment points, or environmental factors that affect the material's integrity.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This fresh food door gasket creates a tight seal around the refrigerator compartment door to keep cold air in and humid air out. Replacing a worn gasket restores proper door closure, stable temperatures, and reduces condensation.

• Forms the seal between the fresh food door and cabinet to limit air leaks
• Helps maintain temperature and humidity; reduces moisture and sweating around the door
• Common symptoms: door won't seal or stay closed, warm spots, condensation, visible tears/warping
• Replace when the gasket is cracked, brittle, or won't lay flat even after warming/reshaping

• Disconnect power before servicing
• Warm the new gasket (hot water or gentle heat) to relax folds—do not overheat
• Start at the corners and seat the gasket under the door's retaining lip, working evenly around
• Perform a dollar-bill test and adjust; allow time for the gasket to conform for best seal

This replacement gallon door bin restores a refrigerator door shelf designed to hold large bottles and containers securely, keeping them organized and easy to reach. It replaces cracked or missing door storage to maintain usable door capacity. What it does:

• Provides a sturdy lower door shelf for storing gallon-sized bottles and tall containers
• Keeps items upright and prevents shifting or tipping when the door opens
• Restores lost or damaged door storage after cracks, breaks, or wear
• Fits into the door rail system and locks into place at the designated mounting points

• One gallon door bin

• Remove all items from the door and open the door fully before beginning
• Align the bin tabs with the door retainer slots and press firmly until it snaps into place
• If old mounting clips are damaged, inspect and replace them before installing the new bin
• No electrical work is required.

This clear plastic refrigerator door rack provides a replacement shelf for holding bottles, condiments and other items on the door. Restores usable storage and a finished look when the original rack is cracked or missing. What it does:

• Replaces a cracked, chipped or broken door shelf so items no longer fall out or tip
• Provides a clear, low-profile storage area for bottles, jars and small containers
• Matches OEM fit and finish for a seamless appearance and proper retention
• Suitable for single-side door rack openings where a clear plastic bin is specified

• Remove all contents from the door before replacing the rack
• Align rack with door supports and press into place until securely seated
• Handle carefully to avoid scratching the clear plastic during installation
• Refer to the refrigerator owner's manual for model-specific removal and installation instructions

The Dairy Lid is an OEM part for GE refrigerators. This clear lid is designed to fit on the dairy drawer of your GE refrigerator, providing a convenient storage solution for dairy products. It helps to maintain the freshness of your dairy items while keeping them protected from cross-contamination and odors in the refrigerator.

Symptoms of a bad dairy drawer lid include:

• Cracks or damage
• Lid not closing securely
• Dairy items not staying fresh

A bad dairy drawer lid can occur due to wear and tear, accidental damage, or other factors. If you notice symptoms such as cracks, damage, or the lid not closing securely, it may be time to replace the dairy drawer lid.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Door Rack is an OEM replacement part for GE refrigerators. It is designed to fit on the refrigerator door, providing storage space for bottles, jars, and other items.

A bad door rack can occur due to wear and tear, accidental damage, or misalignment. If you notice symptoms such as a cracked or broken rack, difficulty in storing items on the door, or items falling off the rack, it may indicate a need to replace the door shelf.

Signs of a faulty door rack include:

• Cracked or broken rack
• Difficulty in storing items on the door
• Items falling off the rack

Restore your refrigerator's door by replacing the faulty door rack with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Handle Mount is an OEM component specifically designed for GE French door refrigerators. It serves as the attachment point for refrigerator door handles.

The handle mount connects the handle assembly securely to the refrigerator door itself. Its sturdy construction manages stress from frequent usage while allowing for smooth operation.

Symptoms of a bad handle mount include:

• Loose, unstable, or detached door handles
• Handles difficult-to-operate or open doors with  
• Visible bending, cracks, or damage to the mount
• Reduced grip strength or door control

Causes can involve normal wear over extended periods, imprecise impacts, or repeated stress from heavy handling exceeding the mount’s limits. 

Replace with this genuine GE OEM part to restore a tight, lasting connection between handles and doors. Compatible also with Hotpoint, RCA, and Kenmore French door refrigerator models.
 

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

This is a #8 x 9/16" pan head Phillips screw used to fasten trim, panels, and small components on compatible appliances. It replaces lost or damaged mounting screws to restore secure fittings and proper alignment. What it does:

• Secures plastic trim, panels, and brackets to appliance housings
• Provides a flush, rounded head for a clean finished appearance
• Phillips drive allows easy installation with common screwdrivers
• Resists loosening under normal appliance vibration

• Use the correct-size Phillips driver to avoid stripping the head
• Thread the screw in straight and tighten until snug; avoid over-tightening
• Replace any corroded or damaged screws to maintain secure attachments
• Disconnect power to the appliance before accessing internal components

This right-side refrigerator door corner cap in Dorian Gray replaces a cracked or missing trim piece to restore the door's finished appearance and help protect the edge from damage. Easy cosmetic replacement for worn or broken corners. What it does:

• Covers and protects the upper right corner of the refrigerator door, preventing exposure of the door edge
• Restores a clean, finished look after chips, cracks, or impact damage
• Helps keep the door gasket seating area visually intact by replacing damaged trim
• Matches Dorian Gray finish to blend with the existing door color

• One (1) right-side door corner cap in Dorian Gray, as shown

• High-level replacement: remove any damaged cap, snap or fasten the new cap into place; retain screws/clips if present
• Use basic hand tools (screwdriver, trim tool) and avoid excessive force when seating the cap
• Power off and empty nearby shelves if removing the door or hinge hardware for access

This left-corner refrigerator door cap restores the finished edge and appearance of the door in Dorian Gray. It covers the corner, protects the trim, and keeps the door looking neat after damage or wear. What it does:

• Replaces a cracked, chipped, or missing left corner trim piece to improve appearance
• Protects the door edge from further damage and hides exposed screw holes or rough edges
• Helps maintain a smooth seal area by preserving the outer trim profile
• Matches the Dorian Gray finish for consistent cosmetic restoration

• One left door corner cap (Dorian Gray)

• High-level snap-on/fasten replacement; may require removing nearby trim or loosening hinge hardware for access
• Use care to align tabs before pressing to avoid breaking clips
• Follow manufacturer instructions for disassembly; unplug the appliance or turn off power when working near electrical components