Parts for Ge GTS22KMNBRDS: Doors Parts

This freezer door gasket forms an airtight seal between the door and cabinet to keep cold air in and moisture out. Replace it when the original is torn, warped, or leaking to restore proper temperature and defrost performance.

• Creates a continuous seal around the freezer door to prevent air leaks
• Helps maintain set temperatures and reduces frost/condensation buildup
• Replaces a gasket that is cracked, torn, deformed, or no longer sealing
• Common symptoms: frost or moisture along the door edge, door not closing fully, warm spots near the gasket

• Disconnect power before servicing
• Let the new gasket warm up (room temperature or brief warm-water soak) to increase flexibility
• Seat the gasket fully in the retainer/channel; use low heat (hair dryer) to relax waves—do not overheat
• Check the seal with a paper/dollar-bill test around the perimeter and adjust alignment if needed

This freezer door stop replaces the damaged or worn bumper that cushions the freezer door, helping it close smoothly and preventing damage to the door or cabinet. Color-matched Dorian Gray finish. What it does:

• Cushions door movement to reduce banging and wear
• Helps the door seal more consistently by providing proper stopping position
• Reduces noise when opening or closing the freezer door
• Restores original fit and finish for a clean, finished appearance

• Basic hand tools may be required; follow the appliance manufacturer's instructions
• Power off and empty the door area if required for safe access before installing
• Inspect surrounding trim and mounting area; replace mounting screws if worn or damaged

This replacement refrigerator door stop cushions and limits door travel to help prevent slamming and misalignment. It restores smooth, controlled door movement and helps the door stay properly positioned for reliable sealing. What it does:

• Absorbs impact and reduces door slam noise when opening or closing
• Limits door travel to prevent over-rotation that can damage the cabinet or hinge
• Helps maintain proper door alignment for an effective seal
• Commonly used when a door slams, hangs open, or rubs against the cabinet

• Unplug the appliance or disconnect power before working near electrical components
• Support the door while removing or installing the stop to prevent it from shifting
• Use appropriate hand tools; do not force or overtighten fasteners

This replacement gasket seals the refrigerator's fresh food compartment in Dorian Gray. It closes gaps around the door to keep cold air in and humid air out, helping stabilize temperatures and reduce condensation for reliable cooling.

• Seals the perimeter of the fresh food door to prevent warm air leaks
• Helps maintain proper temperature and humidity in the refrigerator section
• Reduces condensation or "sweating" around the door area
• Common signs it's worn: tears, cracks, warping/shrinkage, visible gaps, or the door not sealing fully

• Unplug the refrigerator and unload the door bins
• Pull the old gasket from the retainer; on some models, slightly loosen (do not remove) liner screws to release the seal
• Warm the new gasket in hot water or with low, safe heat to relax it; seat corners first, then press the gasket fully into the retainer
• Close the door to check for even contact all around; adjust as needed and allow up to 24 hours for the gasket to conform

This refrigerator door shelf mounts on the inner door to hold condiments, jars, and bottles. Replacing a cracked or missing shelf restores secure, easy-access storage and helps keep items upright when you open and close the door.

• Snaps into the door's molded rails or end tabs to organize and retain containers
• Restores lost door storage capacity for condiments, jars, and tall bottles
• Common symptoms: cracked or broken plastic, loose or missing shelf, items falling from the door
• Visible damage or worn locking tabs prevent the shelf from staying seated

• Remove the old shelf by lifting up and out; empty contents before removal
• Align the new shelf with the door rails/end tabs and press down until fully seated—do not force
• No tools typically required; handle plastic carefully to avoid cracking
• Install in the same location as the original for proper fit and door clearance

The Handle Mount is an OEM component specifically designed for GE French door refrigerators. It serves as the attachment point for refrigerator door handles.

The handle mount connects the handle assembly securely to the refrigerator door itself. Its sturdy construction manages stress from frequent usage while allowing for smooth operation.

Symptoms of a bad handle mount include:

• Loose, unstable, or detached door handles
• Handles difficult-to-operate or open doors with  
• Visible bending, cracks, or damage to the mount
• Reduced grip strength or door control

Causes can involve normal wear over extended periods, imprecise impacts, or repeated stress from heavy handling exceeding the mount’s limits. 

Replace with this genuine GE OEM part to restore a tight, lasting connection between handles and doors. Compatible also with Hotpoint, RCA, and Kenmore French door refrigerator models.
 

This black emblem badge restores the appliance's front appearance by replacing a faded, scratched, or missing logo accent. It provides a clean, finished look so the appliance matches its original styling. What it does:

• Replaces a worn or missing badge to restore factory appearance
• Hides cosmetic damage on the control bezel or exterior trim
• Helps maintain resale value and consistent styling across the appliance lineup
• Visible cosmetic part only — does not affect appliance function

• One black emblem badge

• Clean and dry the mounting area before installing to ensure proper fit
• Align carefully before seating; some badges press into place or adhere to the surface
• Use caution around sharp edges and disconnect power when working near electrical components

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.