Parts for HRT18RCPW0: Doors Parts

The Handle Door WW is an OEM part for GE refrigerators. It is the outer door handle component that is grasped to open and close the refrigerator door. 

The proper function of the handle is important to allow convenient access to food storage. Causes of a bad handle can include wear and tear over time, as well as damage from excessive force or impacts. 

Symptoms of a bad refrigerator door handle include:

• Difficulty grasping or turning the handle firmly  
• Looseness, wobbling or falling off from the door surface
• The handle not engaging properly to open the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Fresh Food Door Gasket is an OEM replacement part for GE refrigerators. It is designed to seal the fresh food door, creating a tight and secure closure. The door gasket helps to maintain the temperature and humidity levels inside the refrigerator, keeping your food fresh and preventing energy waste.

A bad door gasket can be caused by wear and tear over time or damage due to frequent use or improper handling. If you notice air leaks, condensation, or a loose seal around the fresh food door, it may be time to replace the gasket.

Symptoms of a faulty door gasket include:

• Excessive frost or ice buildup inside the refrigerator
• Uneven cooling or temperature fluctuations
• Higher energy consumption

Improve the efficiency and performance of your GE refrigerator by replacing the old or damaged fresh food door gasket with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement freezer door gasket provides a secure seal to help maintain proper freezer temperature and energy efficiency. Designed to match original fit and restore a tight door seal for reliable cold retention. What it does:

• Creates an airtight seal around the freezer door to help prevent warm air infiltration and frost buildup.
• Helps maintain consistent interior temperature for better food preservation.
• Reduces strain on the compressor by improving cooling efficiency.
• Commonly used when the existing gasket is torn, warped, compressed, or no longer seals.

• Remove power to the appliance before starting work to avoid electrical hazard.
• Clean the door flange and warm the gasket slightly for easier installation and proper seating.
• Inspect mounting channel and clips; replace any damaged hardware before installing gasket.

The Door Rack is an OEM replacement part for GE refrigerators. It is designed to fit on the refrigerator door, providing storage space for bottles, jars, and other items.

A bad door rack can occur due to wear and tear, accidental damage, or misalignment. If you notice symptoms such as a cracked or broken rack, difficulty in storing items on the door, or items falling off the rack, it may indicate a need to replace the door shelf.

Signs of a faulty door rack include:

• Cracked or broken rack
• Difficulty in storing items on the door
• Items falling off the rack

Restore your refrigerator's door by replacing the faulty door rack with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This dairy bin cover replaces the removable lid that protects and separates dairy items in the refrigerator compartment, helping keep cheeses, butter and other dairy fresher and organized. Fits the dedicated dairy/covered bin area. What it does:

• Replaces a cracked, warped or missing dairy bin lid to restore a sealed cover for the dairy compartment
• Helps contain odors and protects dairy items from spills and cross-contamination
• Maintains proper placement and stacking of small dairy containers on the shelf
• Compatible with the refrigerator's dairy bin track and snaps into place when aligned

• Remove the old cover by lifting and sliding it out of the dairy bin track; align new cover and snap into place
• Handle with care to avoid cracking the plastic; do not force if resistance is felt
• Clean surfaces and remove food before installing; dishwasher use not recommended
• If fit is tight or hardware is damaged, inspect the dairy bin housing for wear before forcing installation

This shelf door half is a molded freezer door bin that restores storage and containment for small frozen items. The durable white finish replaces a cracked or missing half door to help organize freezer shelves. What it does:

• Replaces a broken or warped freezer door half so items stay contained on the shelf
• Restores a flush door seal area and prevents small items from falling out
• Matches factory-fit mounting points for proper alignment and operation
• Helps maintain neat shelf organization and easier access to stored food

• Unplug or disconnect power to the appliance before servicing
• Empty and remove items from the affected shelf area before installing
• Typically snaps or slides into existing mounting rails; may require gentle pressure to seat
• Keep original fasteners; if hardware is missing, a parts list for replacement fasteners

A small dovetail screw used to secure dovetail-style fittings and trim pieces on compatible appliances. Replaces a worn or missing fastener to restore a secure fit and proper alignment of the affected assembly. What it does:

• Fastens dovetail fittings and trim components to appliance housings or frames
• Keeps panels and trim aligned to prevent rattling or gaps
• Replaces stripped, bent, or missing screws that cause loose parts
• Useful when reassembling after repairs or part replacements

• Turn appliance power off when working near electrical components
• Use correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread damage or snapped screw
• If access requires removing panels, keep track of other fasteners and their locations for reassembly

This thimble door replaces a damaged or discolored inner door on compatible GE laundry appliances, restoring a clean appearance and proper fit so the main door closes and seals correctly. What it does:

• Replaces a cracked, warped or broken thimble door that can prevent the main door from closing
• Helps maintain a snug fit between the main door and the cabinet to reduce gaps
• Reduces risk of rubbing damage to the door seal and visible cabinet finish
• Useful when the existing thimble is chipped, faded or otherwise cosmetically damaged

• Disconnect power to the appliance before starting any repair
• Minimal hand tools are typically required; follow the appliance service manual for disassembly/reassembly steps
• Handle edges carefully to avoid damaging the new part or surrounding trim

This plug button is a small snap-in cap used on refrigerators to cover exposed holes on door handles, liners, or trim. It restores a clean, finished look while helping keep dust and moisture out of the cabinet.

• Snaps into a screw or access hole on a handle, liner, or trim panel
• Covers fasteners and gaps for a clean, finished appearance
• Helps block dirt and moisture from open holes
• Typical symptoms: missing cap, broken or loose plug, visible screw hole or cosmetic gap

• Unplug the appliance before servicing and use caution around sharp edges
• Align the plug with the hole and press straight in by hand until fully seated and flush
• For handle screw holes, tighten fasteners first, then install the cap
• Avoid using metal tools on finished surfaces to prevent scratches

This is a #8 x 9/16" pan head Phillips screw used to fasten trim, panels, and small components on compatible appliances. It replaces lost or damaged mounting screws to restore secure fittings and proper alignment. What it does:

• Secures plastic trim, panels, and brackets to appliance housings
• Provides a flush, rounded head for a clean finished appearance
• Phillips drive allows easy installation with common screwdrivers
• Resists loosening under normal appliance vibration

• Use the correct-size Phillips driver to avoid stripping the head
• Thread the screw in straight and tighten until snug; avoid over-tightening
• Replace any corroded or damaged screws to maintain secure attachments
• Disconnect power to the appliance before accessing internal components

This right-hand door cap is a replacement trim piece that restores the finished edge and basic protection to the door assembly. It helps maintain proper door fit and appearance for compatible GE appliances. What it does:

• Covers and protects the outer edge of the door to prevent dirt intrusion and wear
• Secures/finishes the door trim where the hinge or latch meets the cabinet
• Can address visible damage, loose trim, or minor alignment issues related to the cap
• Restores factory appearance and helps maintain proper door sealing

• Disconnect power to the appliance before beginning any repair.
• Removal/installation typically requires basic hand tools (screwdriver); support the door to avoid stress on hinges.
• Keep fasteners and small parts organized; check fit and alignment before final tightening.