Parts for Hot Point HPS10LGVBRWW: Doors Parts

The Fresh Food Door Gasket is an OEM part for GE refrigerators. This part is responsible for creating an airtight seal between the fresh food compartment and the refrigerator door, preventing cold air from escaping the refrigerator and warm air from entering. It helps maintain consistent temperatures inside the fresh food compartment, keeping your groceries fresh and preserved for longer.

A bad fresh food door gasket can occur due to wear and tear, damage, or other factors. If you notice symptoms such as condensation on the gasket, a decrease in cooling efficiency, or difficulty in closing the refrigerator door, it may be time to replace the gasket.

Symptoms of a bad fresh food door gasket include:

• Condensation on the gasket or refrigerator walls
• Decreased cooling efficiency
• Difficulty in closing the refrigerator door tightly

Restore your refrigerator's fresh food compartment by replacing the faulty door gasket with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This fresh food door stop limits how far the refrigerator fresh food door opens to protect the hinge and cabinet and help the door close properly. It's a small but important door-limiting part that prevents over-rotation and wear. What it does:

• Acts as a mechanical limiter to stop the fresh food door at the correct open position
• Prevents the door from hitting adjacent cabinetry or walls
• Reduces stress on the hinge and door assembly to extend component life
• Can help stop the door from dragging or catching when opening and closing
• Addresses symptoms like excessive door swing, noisy hinge action, or door misalignment

• One fresh food door stop

• Install at the fresh food door hinge/stop area; basic hand tools may be needed
• Work with the refrigerator powered off or the circuit disconnected when accessing internal components

The Fresh Food Door Bin is an OEM component specifically designed for GE refrigerators. This multi-purpose door storage inserts neatly into the fresh food compartment door to conveniently hold condiments, sauce bottles, and beverages. 

The Door Bin helps reduce clutter by selectively corralling smaller items and organizing the fridge interior. Its angled design allows for the visibility of contents without obstructing.

Causes of a faulty bin include cracks or fractures in the plastic casing along stress points. Long-term vibration and impacts in the closing refrigerator door can degrade it over time.

Symptoms include:

• Leaks from cracked or broken sections
• Wobbly or loose installation 
• Capacity for storing items is reduced

This OEM GE part restores maximized storage functionality. Replace to continue easy access and organization within your fridge. It is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Fresh Food Gallon Bin is an OEM replacement part for GE refrigerators. It provides gallon and large item storage in the fresh food compartment. Over time, the plastic bin can become cracked, stained or warped. 

Symptoms of a failing gallon bin are:

• Improper fit in the fridge
• Cracks causing spills
• Inability to properly hold items

Replacing the defective bin restores your refrigerator organization. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This freezer door pin is the pivot pin that secures and lets the freezer door swing smoothly, restoring proper door alignment and seal. A simple replacement when the door is sagging or rubbing. What it does

• Acts as the pivot point for the freezer door, allowing the door to open and close smoothly
• Restores proper door alignment to help the gasket seal evenly
• Stops scraping or catching caused by a worn or bent pin
• Helps prevent premature hinge and frame wear when functioning correctly

• One freezer door pivot pin

• Disconnect power to the appliance and support the door before removing hinge fasteners
• Remove or loosen the hinge to access the pin; replace pin and reassemble in original order
• Tighten fasteners to manufacturer torque specs and verify door alignment and seal before use
• If the hinge or surrounding hardware is damaged, replace those parts as well rather than forcing installation

The Fresh Food Door Rail Bin is an OEM part for GE refrigerators. It provides an angled storage rail mounted along the upper edge of the fresh food door panel for organizing condiments and other small items.

Causes of a bad door rail bin could include cracks or fractures in the plastic material from repeated bending stresses every time the door is opened and closed. Improper handling leading to impact damage is also possible.

Symptoms of failure include: 

• Inability to securely lock into place on door mounting points
• Visible cracks or separations in the rail bin structure
• Items falling out of broken or misaligned storage spaces

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This freezer door rail bin is the molded support rail that holds a freezer door bin in place so stored items stay secure and the bin slides correctly. A direct-fit replacement to restore proper bin support and alignment. What it does:

• Secures the freezer door bin to the door, keeping the bin stable when opening and closing.
• Restores proper fit and prevents the door bin from sagging, shifting, or falling out.
• Replaces a cracked, broken or worn rail that causes loose or wobbly door storage.
• Helps maintain proper door sealing by ensuring door storage components sit correctly.

• One (1) freezer door rail bin (single rail piece) as shown.

• Unplug the refrigerator or disconnect power before starting any repair.
• This part typically snaps into place on the inner door liner; remove the door bin first, then press the rail into the mounting slots.
• Avoid forcing the part—inspect mounting tabs for damage and replace if broken.

The Freezer Door Gasket is an OEM part for GE refrigerators. It creates an insulating seal around the freezer compartment door to maintain cold temperatures inside. 

The gasket helps prevent warm exterior air from entering the freezer which could raise temperatures and impact food storage. It plays a crucial role in energy efficiency by minimizing temperature loss through the door opening.

Symptoms of a bad freezer door gasket include:

• Increased frost or icing buildup inside the freezer 
• Warmer than normal interior freezer temperatures
• Higher energy bills from the refrigerator working harder
• Moisture creeping into the freezer from the outside air

Color: White

This genuine OEM GE replacement gasket will restore a proper seal and ensure optimal performance. It is also compatible with Hotpoint, RCA, and select Kenmore models.
 

This left door hinge (buckle) secures the refrigerator/freezer door to the cabinet and provides a smooth pivot for opening and closing. It replaces worn or damaged hinge hardware to help restore proper door alignment and operation. What it does:

• Provides the pivot point that supports and aligns the left door
• Keeps the door securely attached while allowing smooth opening and closing
• Helps prevent sagging, misalignment, rubbing, or gaps that can affect seal performance
• Works with the hinge pin and mounting hardware to maintain correct door movement

• Turn power off and remove food from the door area before starting any work
• Use appropriate tools and support the door during removal and installation to avoid injury or damage
• Inspect associated hinge pin, screws, and mounting points; replace any worn components as needed

This left fresh food door stop replaces the stop that controls the refrigerator fresh-food door's travel, helping the door latch and close smoothly. Designed to restore proper door positioning for reliable sealing and operation. What it does:

• Limits and cushions the travel of the fresh-food door to prevent over-rotation and contact damage
• Helps the door align so the gasket seals evenly and the refrigerator maintains temperature
• Reduces door noise and banging during opening or closing
• Matches OEM fit and mounting for straightforward replacement when the existing stop is cracked, worn, or missing

• One left fresh food door stop

• Disconnect power to the refrigerator before servicing to avoid electrical hazard
• Remove the door or hinge trim only if required by your model; keep fasteners organized
• Align the stop to the hinge mounting location and secure without over-tightening to avoid cracking the part