Parts for Hot Point HTS18GBBHRCC: 01 - Doors Parts

The Freezer Door Handle Assembly is an OEM part for GE refrigerators. It provides a sturdy grip for opening and closing the freezer door, ensuring easy access to the freezer compartment. This handle is designed to fit securely on the door, enhancing both functionality and the overall appearance of the appliance.

Causes of a bad door handle assembly can include regular wear and tear, accidental impacts, or improper installation. Over time, these factors can lead to the handle becoming loose, cracked, or broken, making it difficult to open or close the freezer door properly.

Symptoms of a bad freezer door handle assembly include:

• Loose or wobbly handle
• Visible cracks or damage
• Difficulty in opening or closing the freezer door
• The handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Handle Door FF is an OEM part for GE refrigerators. This handle is designed for the refrigerator's fresh food compartment door, providing a sturdy and reliable grip for easy opening and closing of the door. 

You should replace the handle door if it becomes damaged or loose, which can occur due to frequent use, accidental impacts, or wear over time. A faulty handle can make it difficult to open or close the refrigerator door properly.

Symptoms of a bad handle door include:

• Cracks or breakage in the handle
• The handle feeling loose or wobbly
• Difficulty in gripping or operating the handle
• The handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This machine screw secures refrigerator brackets, panels, and hardware. Its 12-24 thread and integrated hex-washer head provide a snug, vibration-resistant hold to keep components properly mounted and aligned.

• Fastens mounting brackets, covers, and other hardware to the refrigerator cabinet or frame
• Replaces a missing, stripped, or corroded screw to restore a secure attachment
• Helps reduce rattles, vibration, or shifting caused by loose fasteners
• Supports proper fit and alignment of serviced components

• Disconnect power before servicing; wear cut-resistant gloves
• Match thread and length to the original; do not force mismatched hardware
• Start by hand to avoid cross-threading; tighten snugly without overtightening, especially into plastic
• Retain and transfer any spacers or clips from the original hardware

The Freezer Door Gasket is an OEM part for GE freezers. This gasket plays a crucial role in ensuring an airtight seal around the freezer door, preventing warm air from entering and cold air from escaping.  

Over time, freezer door gaskets can wear out or become damaged due to frequent use, accidental damage, or exposure to extreme temperatures. It is essential to replace the gasket if you notice any of the symptoms mentioned above to ensure your freezer operates efficiently and to avoid unnecessary energy consumption.

Symptoms of a bad Freezer Door Gasket include:

• Visible tears, warps, or gaps in the gasket
• Condensation or frost buildup around the door edges
• Difficulty in maintaining consistent freezer temperatures
• An increase in energy consumption as the freezer works harder to maintain its internal temperature

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This lens nameplate is the replacement front-panel lens that restores the appearance and readable labeling on your appliance's control area. It provides a clean, finished look and protects underlying switches and displays from everyday wear. What it does

• Replaces a cracked, scratched, faded, or missing front-panel lens to restore readable labels and appearance
• Protects control buttons, switches, and the display area from dirt and wear
• Helps keep the control area looking new and prevents accidental pressing of internal components
• Fits into the existing bezel or mounting points for a direct cosmetic replacement

• One lens nameplate

• Disconnect power to the appliance before starting any repair
• Remove surrounding trim or bezel to access the lens; retain all fasteners
• Install the lens carefully to avoid scratching; align tabs or mounting holes and secure with original hardware
• If adhesive or clips were used originally, replace with manufacturer-specified fasteners

The Fresh Food Door Gasket is an OEM part for GE refrigerators. This gasket is crucial for creating a tight seal around the edge of the refrigerator door, ensuring that cold air stays inside and warm air stays out. By maintaining an airtight seal, this gasket helps to keep food fresh longer, prevents frost buildup, and enhances the overall energy efficiency of the refrigerator. 

Symptoms of a failing fresh food door gasket include:

• Noticeable gaps between the gasket and the refrigerator frame
• Condensation or frost forming inside the refrigerator
• Increased energy consumption as the refrigerator works harder to maintain its internal temperature
• The door not closing properly or feeling loose

Causes of door gasket wear typically include normal aging, exposure to harsh cleaning chemicals, and frequent opening and closing of the refrigerator door, which can stretch and deform the gasket over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dairy Door is an OEM part for GE refrigerators. This door is designed to fit the dairy compartment, usually located on the refrigerator door, providing a dedicated storage space for butter, cheese, and other dairy products. The dairy door helps to keep these items separate from the main compartment, often slightly warmer to prevent butter from hardening too much, while still keeping cheese and other dairy products fresh.

Causes of damage to the dairy door can range from normal wear and tear to accidental impacts from loading groceries or containers pressing against it when the refrigerator door is closed.  

Symptoms of a bad Dairy Door include:

• Cracks or breaks in the door 
• Difficulty closing the door or it not staying closed 
• Discoloration or damage 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Door Shelf Bar is an OEM part compatible with GE refrigerators. This component serves as a support and retaining bar for the shelves located on the inside of the freezer door, ensuring they remain securely in place. This shelf bar measures 23” wide by 2” high and 5” deep

Symptoms that may indicate the need to replace the freezer door shelf bar include:

• Shelves becoming loose or falling out of the freezer door
• The bar itself becoming cracked, bent, or otherwise damaged

Causes of a faulty freezer door shelf bar can include physical impact or mishandling, excessive weight or force applied to the shelves, or general wear and tear over extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This reversible door plug covers the unused hinge or mounting hole after changing a door swing, restoring a clean appearance and helping keep out dirt and drafts. Simple, color-matched replacement for a neat finish. What it does:

• Covers exposed hinge or mounting holes on the door edge for a finished look
• Helps block dust, pests and drafts from entering through unused openings
• Matches original geometry to sit flush with the door surface
• Designed to work with reversible door installations where a hole is no longer used

• One (1) reversible door plug

• No tools are typically required; press plug into the unused hole until it seats securely
• Confirm correct orientation before installing to ensure a flush fit
• Inspect surrounding sealing surfaces and clean area before installation
• If plug is damaged or does not seat properly, replace with the exact part number

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

Color: white. Measures about 1/2 an inch wide by 2/3 of an inch high.

The Door Shelf Bar is an OEM part for GE refrigerators. This bar provides support and containment for items stored on the door shelves, helping to keep them organized and securely in place when the door is opened and closed. 

Over time, the door shelf bar can become damaged due to regular use, heavy items, or accidental impact. If the bar is broken or missing, it can result in items falling out of the door shelves and potentially breaking.

Symptoms of a bad door shelf bar include:

• Items falling out of the door shelves
• The bar being loose or not fitting properly
• Visible cracks or damage on the bar
• Difficulty keeping the door shelves organized

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Screw is an OEM replacement part for GE refrigerators. Countless screws are used throughout the refrigerator to securely hold parts in place.

Symptoms of a bad or missing screw can include:

• Rattling or vibration noises coming from inside the appliance 
• Doors or other parts that are no longer properly aligned
• Increased frost or cold air leaks due to compromised seals

Causes may include normal wear and tear over time, accidental damage or loss of a screw during repairs, or improper assembly leaving crucial screws omitted. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.

This plug button thimble is a small insulating part that supports and protects a push button or plug terminal, helping maintain a secure electrical connection and preventing wear or arcing. It restores proper button fit and function. What it does:

• Cushions and centers a push button or plug terminal for smooth operation
• Provides electrical insulation to reduce risk of shorting or arcing
• Helps keep the button/plug securely seated to prevent intermittent contact
• Commonly replaced when buttons wobble, stick, or have poor electrical connection

• Disconnect power to the appliance before attempting any repair.
• Replacement typically requires removing the control panel or button assembly; handle plastic parts carefully to avoid cracking.
• Verify orientation and seating before reassembling to ensure proper button movement.

This plug button is a small snap-in cap used on refrigerators to cover exposed holes on door handles, liners, or trim. It restores a clean, finished look while helping keep dust and moisture out of the cabinet.

• Snaps into a screw or access hole on a handle, liner, or trim panel
• Covers fasteners and gaps for a clean, finished appearance
• Helps block dirt and moisture from open holes
• Typical symptoms: missing cap, broken or loose plug, visible screw hole or cosmetic gap

• Unplug the appliance before servicing and use caution around sharp edges
• Align the plug with the hole and press straight in by hand until fully seated and flush
• For handle screw holes, tighten fasteners first, then install the cap
• Avoid using metal tools on finished surfaces to prevent scratches