Parts for Universal Multiflex (Frigidaire) MRTD23V6MM1: Doors Parts

Seals freezer door to prevent air leaks and maintain temperature. Replace if door won't stay closed or gasket is torn. Confirm fit with your model number.

Seals the refrigerator door to prevent cold air loss and maintain efficiency. Replace if torn, cracked, or not sealing properly. Verify fit by model.

Replacement door bin shelf for refrigerator doors. Installs on the inside door to hold condiments and bottles. Replace if cracked, broken, or missing.

The Dairy Door is an OEM replacement part for  Frigidaire side-by-side refrigerators. Located inside the fresh food compartment, it provides a dedicated storage area for milk, yogurt, cheese and other dairy products requiring colder temperatures. The door measures approximately 9 inches wide and 5 inches high.

Causes of a bad dairy door include normal wear from repeated opening and closing over time. Exposure to spills inside the refrigerator can also potentially damage door shelf components or seals.

Symptoms of a bad dairy door are: 

• Difficulty opening or closing the door smoothly  
• Door alignment issues where it does not sit flush in the frame
• Leaks or moisture inside the dairy storage area
• Damage or cracks in shelf supports or gasket seals

This OEM part is also compatible with models from brands like Electrolux, Gibson, and Kelvinator brand models.

NOTE: For white use 240337701

Replace your cracked, broken, or missing freezer door shelf. This storage bin installs on the freezer door for convenient access to frozen items.

Small plastic push button for refrigerator control panels. Replaces cracked, worn, or missing buttons to restore tactile control and complete appearance.

This outer freezer door replaces a damaged or dented freezer-front panel to restore seal alignment and cabinet appearance. It provides the proper mounting surface for the gasket and inner liner so the freezer can maintain cold temperatures. What it does:

• Replaces a cracked, dented, or bent freezer door that prevents proper sealing
• Restores a flat mounting surface for the door gasket to help improve cold retention
• Returns normal door alignment and latch engagement when worn or damaged
• Helps eliminate drafts or frost buildup caused by a compromised door

• Disconnect power to the appliance and empty the door before starting work
• Preserve or transfer any door hardware, trim, hinge pins, or gasket from the old door
• Check door alignment and gasket seating after installation; adjust hinges per manufacturer instructions

Limits refrigerator door opening range to prevent overextension and hinge damage. Replace worn or broken stops to restore controlled movement.

Plastic door stop that cushions refrigerator door closure and prevents impact damage to walls or cabinets. Replace if cracked, broken, or missing.

Refrigerator plug button insert for top-mount models. Replaces cracked, broken, or missing plug buttons. Installs in refrigerator body or door panel.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Nylon bearing that fits on the door hinge pivot point. Replace when worn, cracked, or missing to prevent door sagging and alignment issues.

Replacement butter dish for refrigerator door dairy compartment. Restores secure storage when original is cracked, broken, or missing. Fits top-mount models.

Egg container for refrigerator door storage. Replace if cracked, broken, or missing. Holds eggs securely in fridge door shelf compartment.

Retainer bar mounts to refrigerator door shelf to secure tall bottles and containers. Replace if cracked, broken, or missing to prevent items from tipping.

Replace your cracked, broken, or missing refrigerator door bin. This shelf installs on the door to hold bottles, jars, and condiments securely in place.

Replace your cracked, broken, or missing refrigerator door bin. Snaps into place on the door interior for storing condiments, jars, and bottles.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.