Parts for Speed Queen AWNE9RSN115TW01: Drain Pump / Drain Hose / Siphon Break Kit Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Drain Hose is an OEM part for Speedqueen washers. It is responsible for channeling water from the washing machine through the building drain system after each cycle. As a continuously flexing component, the drain hose endures pressure with every load.

Causes of a bad drain hose can include cracking, kinking or splitting resulting from thousands of flex cycles over time. Improper installation may create tight bends that fatigue the material.

Symptoms of a bad Drain Hose include:

• Leaks or drips at hose connections during or after drains
• Limitations in drain rate due to partial blockages or restrictions
• Standing water remaining in washer if hose is compromised
• Potential flooding issues from disconnected or burst hoses

A size #20 hose clamp used to secure flexible hoses to fittings on laundry appliances, helping prevent leaks and keep hoses firmly attached during operation. Simple, low-profile design for reliable hose connections. What it does:

• Secures washer drain and inlet hoses to fittings to reduce leak risk.
• Prevents hoses from slipping off under pressure or vibration.
• Helps maintain consistent water flow by keeping connections tight.
• Fits standard #20 hose diameter applications commonly used on laundry equipment.

• One size #20 hose clamp.

• Use a flathead screwdriver or nut driver to tighten; turn until snug—do not overtighten to avoid hose damage.
• Inspect hose and fitting for cracks or corrosion and replace if needed before installing the clamp.
• After installation, run a short test cycle and check for leaks; retighten if necessary.
• Disconnect power and water supply before servicing the appliance.

This pump assembly removes wash water from the tub and routes it to the household drain so the washer can complete drain and spin cycles reliably. Designed to restore proper water removal and reduce leak risk when the old pump fails. What it does:

• Forces wastewater out of the tub during drain cycles so the washer can advance to spin and finish cycles
• Helps prevent standing water in the drum that can cause odors or skipped cycles
• Can reduce abnormal noises caused by a failing or clogged pump
• Works with the washer's drain hose and plumbing to maintain proper flow

• One pump assembly

• Disconnect power and water before starting any repair
• Inspect and clear the drain hose and pump inlet before replacing the pump
• Expect basic panel and hose removal; keep screws and fasteners organized
• After installation, run a short drain/spin cycle to check for leaks and proper operation

This #24 hose clamp secures flexible washer hoses at fittings to help prevent leaks and hose separation during use. A small but essential fastener for maintaining reliable water connections. What it does

• Tightens around a hose connection to hold the hose firmly on a barb or nipple
• Helps prevent water leaks at the hose-to-fitting interface
• Keeps drain or fill hoses from slipping off during operation
• Useful when replacing a cracked or corroded clamp that no longer holds tension

• Disconnect power and shut off the water supply before servicing hoses
• Use appropriate pliers or a clamp tool; avoid squeezing so hard that the clamp or hose is damaged
• Position clamp so it compresses the hose over the fitting barb, then tighten until secure but not overcompressed
• Inspect the hose for wear or damage and replace the hose if needed

The Tub to Pump Hose is an OEM part for Speed Queen commercial washing machines. This hose connects the washer tub to the pump, allowing water to be drained out of the tub and released when cycles are complete.

Causes of a bad tub to pump hose can include mineral deposits building up over time, cracks or leaks developing in the rubber material, or accidental cuts or cracks from mishandling.

Symptoms of a bad tub-to-pump hose include:

• Water leaks inside or outside of the machine
• Inability to fully drain water after cycles
• Slow drain times
• Erratic water levels during fill cycles
• Error codes related to draining or water level sensors

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.