Parts for Husqvarna 96043031100: Drive Parts

This key is a genuine Husqvarna part, sold individually. This key can be used as a replacement part in a lawn mower. The key in a lawn mower is used to power on the appliance by fitting into the ignition system of the appliance and then allowing the mechanisms within the appliance to ignite the spark plugs and power on the engine.The key in a lawn mower might need to be replaced if it is lost, misplaced, or damaged to the point that it cannot be used to enter the ignition system and turn on the appliance. This could occur if the key has been dented, punctured, torn, warped, or eroded during the standard use of the appliance. If this occurs, or if the key has been lost, it should be replaced by this genuine OEM replacement part in order to use the appliance again. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This key is compatible with the following outdoor appliance brands: Husqvarna.

This genuine Husqvarna hub bolt is used on riding lawn mowers and other Husqvarna tractors when installing the rear wheel assembly. During routine repairs to the rear wheel hub assembly, this bolt may become damaged if it is too tightly installed. If the bolt becomes stripped or bent due to excess pressure needed to remove it, these replacement bolts are identical to the original parts. Individually sold, the number of bolts ordered will depend on how many need to be replaced; the wheel assembly requires five. Before replacing the wheel assembly, jack the machine up to reach the wheel assembly. A wrench with a hexagon head is required for proper installation and a socket extension may be necessary. During installation, do not over-tighten the bolt as this can cause damage to the wheel assembly and possibly strip the new bolt. If the lawn mower or tractor is under warranty, make sure to check the paperwork. If manufacturer original replacement parts are required to keep the warranty valid, this OEM Husqvarna hub bolt is the right one.

This is an idler pulley meant to be used on many brands of lawn tractor or mower. It is designed to create tension on the drive belt, and it can wear with years of use or be damaged by a blow to the mower deck or by an over-accumulation of debris that causes it to become jammed. To repair or replace this genuine OEM part, it requires pliers and a wrench. The steps used include removing the mower deck, removing the bolt securing the pulley and drive belt, removing the washer and bolt from the pulley, and replacing it with a new one. Then, the original or a new belt can be installed before the mower deck is restored. This parts fits with mowers, trimmers, and tractors sold by brands like Husqvarna, Poulan, Weed Eater, and Jonsered. It ships individually and is made of durable plastic.

This is a genuine OEM replacement that is designed for use with riding lawn mowers. This idler pulley helps drive the engine of the Lawn Mower. This part experiences a lot of constant motion, which can cause it to wear over time. It can also become damaged due to an impact or in the course of other repairs, which would require a replacement. This genuine OEM part features a 3/8-inch mounting hole and 3.5-inch exterior diameter, and includes a one-year warranty and can provide a replacement for compatible engines. This OEM idler pulley is manufactured by Husqvarna and designed to be compatible with select machines from the brand, as well as brands like Poulan, Weed Eater, and Jonsered. It is made of durable plastic with a metal bushing and fitting and will provide an exact replacement fit for hundreds of compatible engines. This part is sold individually and does not include any necessary hardware. Ensure that the engine is cool and gloves are worn for hand protection when replacing this part.

A hex screw can be used on a variety of different types of lawn and garden equipment. On small machines, it can be used to hold the housing together while on larger machines, it might be used to mount on the gas tank. It's versatile with the ability to secure items including wood, plastic, metal, and brick together. The screw is made of high-quality metal and measures 5/16-18 x ¾ inches. Sometimes these screws can become stripped, get damaged, or even break and will need to be replaced.Inspect the screw for any damage, looseness, or debris that might be causing issues. If the damage is major or the screw is stripped, it will need to be replaced. In most cases, the screw can be removed using nothing more than a screwdriver before inserting the replacement screw. For stripped screws, pliers may be needed to get the original screw out of the equipment.This hex screw is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. The screw is compatible with lawnmowers, string trimmers, snowblowers, and tillers by Craftsman, Ariens, Husqvarna, Poulan Pro, Weed Eater, and Poulan.

This is a bellcrank ground drive intended for use with riding mowers, tractors, and trimmers. The bellcrank ground drive employs the idler pulleys when the pedal brake control shaft assembly is pressed. A new bellcrank may be needed if the original was faulty, or if it becomes significantly worn through general operation of the machinery. However, installation of a new bellcrank is relatively simple. Only a few tools will be required when replacing this item, including: a socket set, a set of pliers and a hex wrench. The removal of the mower deck will also be required. The user should refer to their owner's manual for guidance regarding their specific model.This is an OEM part sourced directly from the manufacturer. It is sold individually. The bellcrank ground drive is designed for use in Husqvarna, Poulan, Weed Eater, and Jonsered models.

This transaxle belt keeper is a genuine Husqvarna part, sold individually. This transaxle belt keeper can be used as a replacement part in a lawn mower. This part maintains the position of the transaxle belt.If the belt frequently slips out of place or the belt keeper is detached from the transaxle altogether, the transaxle belt keeper should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This transaxle belt keeper is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.