Parts for Mtd 12A-459S762: Drive Parts

The sealed ball bearings are used as a means to limit the amount of friction that occurs between a fixed part of the assembly and a rotating shaft. They can be used for numerous applications in lawn and garden equipment. The ball bearings are used in various locations of different types of machines, so the issues that could crop up will vary. Typically, bad ball bearings will create knocking sounds in the engine, or parts in the engine could be difficult to turn. When the ball bearings are no longer sealed or not functioning properly, they should be replaced. This genuine OEM replacement ball bearing is sold individually. The ball bearing works with many models of lawn mowers, snowblowers, edgers, wood chippers, and tillers. Compatible brands include Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. Buyers should always ensure they are buying the correct parts for their make and model.

This is a genuine replacement extension spring that is designed to be used in select models of walk-behind lawn mowers and lawn tractors. The extension spring is responsible for allowing the idler pulley to pivot to help when turning off the blade or engaging it for rotation. The spring is subject to repetitive motion and regular use, so it can wear down over time though it is made of durable materials. It can also become damaged due to an incident. In either case, a replacement with an OEM part will resolve the issue. This genuine extension spring is manufactured to OEM standards by MTD. It is compatible with lawn tractors and mowers from MTD, Troy-Bilt, Cub Cadet, and Yard Man. This is sold as an individual part and those who require additional parts will have to purchase them separately. The model diagram can point out necessary associated parts the owner may also want to replace. Disengage the engine and the blades before working on or around the mower deck. Wear gloves for hand protection and ensure that work is done in a well-ventilated area.

This replacement part is a washer. This is a genuine replacement part made by MTD. Washers are small but necessary in many different types of machinery. They usually work with other small parts like screws, bolts, or nuts to keep larger pieces secure and in place. A new washer might be needed if the current one has been worn down or damaged. This part can easily become stripped due to normal wear and tear. Replacing a washer should be a simple repair and require common household tools like a screwdriver or pliers. Work gloves are always recommended when working with small parts. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This grease plug is a genuine OEM replacement part sourced directly from the manufacturer. It is found on snowblowers and other outdoor yard machines on the gearcase assembly, which houses the auger gear. The grease plug seals the oil port on the gearbox. This keeps lubrication inside the gearbox and is the access point for adding more when needed. If this plug is lost, the gearbox's oil could leak out, and contaminants could get into the gearbox.Lubricate the contents of the gearbox before installing the new grease plug. Locate and remove the two screws on the side to drain the gearbox. Install the grease plug in the bottom. Refill the oil using the vent hole. Continue filling until oil is coming out the top side screw. Close everything back up, and the machine is ready for use. To prepare the equipment for long storage, remove the grease plug and check the oil level. If it is not to the top, add more lubricant before sealing the grease plug.This grease plug is made of durable black molded plastic and is sold as an individual unit. It is compatible with snowblowers and snow throwers manufactured by Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, and Husky.

This replacement part is a shaft assembly. It transfers power from the transmission to the wheels, allowing the lawn mower to move.A new shaft assembly might be needed if the current part is damaged, including being dented, bent, or cracked. This part may also become worn after years of normal use. Work gloves are recommended while working near the engine. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This is a height adjuster knob for walk-behind lawn mowers. It attaches to the height adjuster lever. This component is used to adjust the front wheels on the lawnmower deck. This adjustment allows the user to select the desired cutting height of the grass. This component is made out of a hardened foam material that is easy to grip.If the height adjuster knob falls off of the height adjust lever and will not reattach, it is likely that it will need to be replaced. The height adjuster lever itself is sold separately. The repair person may wish to wear gloves when replacing this part.This component is sourced straight from the manufacturer. It is sold individually and is a genuine OEM part. This height adjuster knob is compatible with walk-behind lawnmowers that are manufactured by the Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, Craftsman, and Husky brands.

This replacement part is a hex screw. This is a genuine replacement part made by MTD. This type of screw is commonly found in many types of machinery and appliances. Screws are able to keep certain parts stable and connected so that they are secure during use. A new hex screw might be needed if the current one is visibly damaged in any way or missing. It is not uncommon for screws to become stripped down or lodged in place after years of normal use. If this is the case they should be replaced as soon as possible. If the screw is lodged in place, pliers might be required on top of a screwdriver to complete this repair. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This specially designed lawn mower wheel provides reliable performance for walk behind lawn mowers. This wheel is black. The wheel's evenly spaced ridges provide traction on most lawn surfaces. This wheel is intended for home lawn maintenance mowers in need of a replacement wheel. The wheel can be used to replace the front or rear wheels in supported models. These wheels attach to the drive assembly. This complete wheel is sold individually and has two connection points, as well as the hollow middle which allows it to fit easily onto the wheelbase. Wheels can require replacement after they are damaged or destroyed by debris, nails, rocks, or incorrect use. This wheel provides a reliable replacement for wheels that have failed. Self-propelled mowers have the ability to be lowered and raised according to the terrain. These wheels will support a walk-behind mower used in this capacity.This lawn mower wheel is compatible with walk-behind push lawn mowers, including Cub Cadet, MTD, Bolens, and Yard-Man. Refer to the lawn mower's manual for instructions on replacing a wheel. Models may vary. This Genuine MTD part is an OEM replacement part sourced directly from the manufacturer.

This hub cap is for use with select walk-behind mower models. The hubcap serves the same purpose as those found on automobiles. They serve to protect the wheel and to reduce the amount of dirt, debris, and moisture that collects on the wheel hub. The hub caps are simple parts, but if they are missing or damaged, the owner will want to replace them.The hub caps are made from durable plastic. They can handle the regular use that a mower sees without trouble, but they could still become damaged. They might become loose and need to be replaced, as well. Removing the old hub caps and adding new ones is a fast and simple repair.These hub caps will work with certain mower models from MTD, Ryobi, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Husky. The hub caps are sold individually. Owners may need to buy more than one. This is a genuine OEM replacement part sourced from the manufacturer.

This replacement part is a height adjuster. This is a genuine replacement part made by MTD. This part allows the user to adjust the height of the blades in a lawn mower for finer control over the length of the grass after cutting.A new height adjust might be needed if the user is unable to control the height of the blades in the lawn mower. This can be from an isolated incident or from normal wear and tear over time. If the height adjuster is faulty, the user might not be able to change the settings to their desired height. Be sure to wear work gloves as this part is typically close to the blades of the machine. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.

This dowel pin is a genuine MTD part, sold individually. This dowel pin can be used as a replacement part for a lawn mower, a tiller, or a wood chipper. The purpose of a dowel pin in one of these tools is to serve as a fastening component that affixes two different components to one another by fitting into the cylindrical hole of the dowel pin.The dowel pin can be easily lost or misplaced as it is a small component. The dowel pin can also become stripped. If this occurs, the component should be immediately replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. The operator of the appliance should be aware that this component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This dowel pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Bolens, MasterCut, and Yard Man.

This ground drive belt works to drive the transmission, which turns the wheels of the lawn maintenance equipment. The ground drive belt might be attached in a way that transfers the engine’s power to the pulley in charge of spinning the blades instead. Ground drive belts are made from a flexible rubber that can become brittle, cracked, or broken over time. The replacement of the ground drive belt will require a wrench to complete. This ground drive belt is compatible with Bolens, Craftsman, Ryobi, MTD, Troy-Bilt, White Outdoor, Yard Machines, and Yard-Man brands. It can be placed in lawnmowers, tillers, chipper shredders, leaf blowers/vacuums, edgers, log splitters, snowblowers, trimmer, and other lawn and garden equipment. This ground drive belt is a genuine OEM part.