Parts for Weedeater HD3Q4E9A: Drive Parts

This part is a replacement brake return spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective brake return spring return in a variety of lawn tractor models.The brake return spring allows the brake itself to release. This part attaches to the brake lever and is essential for the safe use of the lawn tractor. Springs such as this one will need to be replaced when stretched, snapped, corroded, or no longer effective. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this brake return spring, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this brake return spring is suitable for use on lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

The Ground Drive Knob is an OEM Replacement Part designed for use with Husqvarna shift rods. Made out of plastic, this component features a 1/2-inch hole for easy installation. The knob is essential for the operation of the shift rod, allowing for smooth and efficient gear changes. No tools are required for the replacement process, making it a straightforward task. If the knob breaks or strips, it will need to be replaced to ensure the proper functioning of the shift rod. Please note that the lifespan of this part may vary depending on usage and maintenance.

This is a flat idler pulley, which is also called a blade idler pulley. The purpose of this pulley is to apply tension to the blade belt. This is what allows the belt to turn and the blades to function properly on the lawn tractor. If the pulley is damaged or breaks, the tractor's blades will not be able to turn, and they will not cut.The metal pulley is durable, but over time, it could need to be replaced. In some cases, it might break during the use of the tractor. It could also wear down or corrode. Owners will need to replace the pulley as soon as possible, so they can get their tractor functioning correctly again. this project is relatively easy and will require a 9/16-inch socket.This flat idler pulley will work for certain tractor models from the brands Jonsered, Husqvarna, Poulan, and Weed Eater. This part is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This replacement part is a bearing. It is a genuine replacement part made by Husqvarna. Bearings are used in and around the engine to assist different parts in their rotating mechanisms. They are used to provide additional space to move as well as prevent too much friction from occurring. A new bearing might be needed if the user notices unusual noises coming from inside the appliance or machine. When bearings are damaged, parts rub together and create loud noises. Be sure to wear working gloves during this repair as the bearing could be close to other sharp objects and the user might be in danger of being injured. This part is a genuine OEM replacement part. This bearing is sold individually and is sourced directly from the manufacturer.

This is a genuine OEM replacement drive V-belt for a riding lawn mower. The drive V-belt attaches to the drive pulley and transfers rotational motion from the transmission to the mower blade. This causes the blade to then spin and cut grass. By using a belt to transfer motion, the engine does not have to work as hard to spin multiple parts, meaning that it runs more efficiently. Drive V-belts are made of a rubber composite material that will begin to fray and stretch over time. Due to continuous motion, these belts absorb a lot of wear and tear, and if left for too long, they can eventually snap and leave the mower blade non-functional. Therefore, it is wise to check the condition of a V-belt during regular maintenance. As soon as it appears to be wearing away, replace it with a new part using a nut driver and screwdriver. When detaching the lower deck, be sure not to lose the bolt clips, as they are required for reassembly. As a high-quality replacement part, this drive V-belt is directly sourced from its original manufacturer. It is compatible with riding lawn mowers made by Husqvarna, Poulan, Craftsman, and Jonsered. This part ships individually.

This replacement part is a belt keeper, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Belt keepers are an important part in many different types of lawn mowers. This part ensures that the belt inside the device is attached and held in place properly. A new belt keeper might be needed if the current one is becoming loose or slipping off. If the user is unable to tighten the belt keeper, it should be replaced immediately. It is possible that the screws become stripped overtime and the belt keeper is unable to stay steady. This can cause the belt to be out of place and can ruin the overall performance of the device. This part is sold individually. This is a genuine OEM replacement part sourced directly from the manufacturer. Be sure the engine is powered off before replacing the belt keeper.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.

This spring is a torsion spring. It is a genuine Husqvarna part. It is a replacement part for lawn mowers, lawn tractors, and riding mowers. On these machines, the torsion spring is part of the pivot bracket. It helps keep the shift rod in the right position.The torsion spring also creates tension and torque. Without it, the mower will not operate correctly. Before starting this repair, be sure the engine is completely cool and disconnect the spark plug to prevent accidental starting.This spring or torsion spring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is designed to be compatible with equipment made by Husqvarna, Poulan, Weed Eater, and Craftsman. It also replaces obsolete part number 123782X.