Parts for Mcculloch MC025 TYPE 2: Drive Shaft / Shield / Handle Parts

This throttle assembly cable is manufactured by Craftsman, but also used by Poulan, to regulate the flow of fuel to certain small gasoline-powered engines. This assembly houses the throttle trigger that is used by almost a dozen different machines, including not only trimmers, but also pole saws and other small gasoline-powered tools. Apart from the cutting edges of the pole saws and trimmers, the parts of these devices that sees the most wear and tear, and is most likely to fail, are the throttle assemblies. Whether banged about because of proximity to the throttle trigger or simply because it's the only part protruding from the mid-body of the typical weed cutter, the throttle assembly housing and cable are susceptible to failure. Most often, failure of the cable is the result of one of the buds, attached at the ends to clasp securely, having broken off. In this case, the gasoline engine may start, but will not rev or only does so sporadically. Replacing the cable is a matter of removing the throttle housing and trigger as well as detaching the cable from the carburetor. When replacing the cable, be sure to use one like this, which is a genuine OEM replacement part, manufactured to replicate the specs of the original.

This replacement part is a screw. This part is a genuine replacement part made by Husqvarna. Screws are small but important in many different types of machinery. Screws are able to hold different parts in place and help them stay secure during use so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is missing or damaged in any way. It is possible that the screw can become stripped over time and therefore not stay in place properly. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require a screwdriver and possible pliers. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. Note that This is a genuine OEM replacement part.

This genuine Husqvarna wire assembly can be used as a replacement part for string trimmers and pole pruners. The wire assembly is located in the tube to which the handle set and the motor housing assembly are attached on opposite ends. The purpose of a wire assembly for these small engine outdoor appliances is to transmit electrical power through the tube to the handle set and the motor housing assembly on either end.A wire assembly might have to be ordered as a replacement if it becomes frayed or otherwise damaged. This damage could occur from general long-term usage, exposure to the elements, or corrosion to the material as a result of a collision. If this kind of damage occurs, this genuine OEM replacement wire assembly should be ordered immediately. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This wire assembly is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

This is a throttle housing designed to go around the throttle cable, trigger, and wire to keep all of those components secure and protected. It's made of durable plastic but wear and tear or impact can damage or break the throttle housing.It's easy to determine with visual inspection if the throttle housing needs to be replaced. A pair of work gloves and an Allen wrench will be needed to complete the repair. The process involves taking out a set of four screws that hold the old throttle housing. Take it off of the equipment and install the new one using the same screws. Once the new housing is placed, the equipment can be used as normal.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The throttle housing is made for use with string trimmers and pole pruners manufactured by Poulan, Poulan Pro, and Craftsman. This part is sold individually. This part is sold individually.

This trigger is designed to control the operation of the equipment and its running speed. When this trigger is in working order, it connects to the throttle and the linkage, and when it is squeezed or depressed, it will speed up the rotation of the engine. Over time, the trigger can become worn with regular use. In some cases, these plastic triggers can also become damaged. Either way, replacing broken models with this OEM replacement trigger will get things back on track. This replacement trigger is compatible with equipment from Poulan, Husqvarna, and Weed Eater. There are more than 35 models of trimmers and pruners that can use this trigger. It installs easily with just a screwdriver. The throttle housing does have to be removed in order to release the cable from the existing trigger, but this only requires removing a couple of screws to get to the trigger itself for removal and replacement. This trigger is made of durable plastic materials that are designed to stand up to plenty of regular use. It is sold individually and customers will need to purchase any desired hardware separately.

The handle assist is the handle that is held to steer and control the machine during the trimming process. As the primary touchpoint, the handle has to provide enough comfort while assisting with the machine's function. This handle is designed to be gloves-friendly with a surface rough enough to provide security against slip. Use this as a replacement for a broken, loose, or worn handle. Remember always to hold the handle firmly while operating. This part is designed for use on trimmers or weed cutters made by Craftsman, Weed Eater, Poulan, or Poulan Pro. This is a genuine OEM replacement handle that will provide extra control and less hand fatigue. It is sold individually.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

This part is a replacement driveshaft coupler. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective driveshaft coupler in a variety of line trimmer models.The driveshaft coupler connects the lower driveshaft to the upper driveshaft. This part may become worn or broken over time and will need to be replaced. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this driveshaft coupler, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this driveshaft coupler is suitable for use on several different models of line trimmers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

The curved drive shaft is a hollow piece that holds the drive cable, so that the engine can turn the cutting string. A curved drive shaft allows for more maneuverability and a lighter string trimmer. The curved shaft is also best suited for users who are shorter in height, or working in tight spaces that require more maneuverability. This product is made of durable plastic, but can become dry, worn or cracked over time. Replacement is needed when experiencing excess vibrations in the housing and handles, or excess spinning of the head occurs. If noticeable drying or cracking is observed on the part itself, go ahead and replace to maintain the functionality and safety of use. Replacement is simple, and may require a wrench, socket wrench or screwdriver; depending on type of trimmer. Remove trimmer head and guard by unscrewing the head from the shaft, and unscrewing the wing nuts that hold the guard in place. Using the socket wrench, loosen the locking nut at the top of the drive shaft, depress the alignment pin and remove the old drive shaft. Attach new shaft and reassemble. This part is compatible with Poulan trimmers and is an OEM part sourced directly from the manufacturer, and it is sold individually.

This shield kit is a genuine Husqvarna replacement part for a line trimmers and pole saws. The shield kit, also known as a guard, is a safety precaution to protect the engine from damage and to protect the appliance user from flying debris. The shield also manages the amount of string trimmer line that is spooled out. The shield kit of a line trimmer or pole saw might have to be replaced if there is significant damage to the exterior. While shield kits for line trimmers and pole saws are designed to be durable, the exterior can be gradually worn away by collisions with flying debris and small stones, causing warping and erosion to the plastic material. If the shield kit is damaged, it must be removed and replaced immediately, as it is important for safe use of the appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shield kit is compatible with the following brands: Husqvarna, Weed Eater, Craftsman, and Poulan. This part sold individually.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

This part is a replacement spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current spring is broken or defective, this part can be used as a replacement. It is intended for use with trimmers.The spring works by applying tension to the head of the trimmer. Over time and with regular use, springs can easily break or become eroded, requiring replacement. When working on or near an engine or blades, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this spring, the appropriate owner's manual and equipment diagrams should be referenced. This spring is suitable for use on a variety of trimmer models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This is a wound spool assembly that can be used on several models of lawn and garden equipment. The spool assembly is the part that holds the trimming line. It also operates by letting the line feed out when a trimmer or pruner is being used. The wound spool assembly is a component of the cutting head assembly but can be replaced as a single part. This wound spool assembly part experiences a great amount of wear and tear. It's not a bad idea to have an extra available for any needed replacement. If the spool assembly is broken or damaged, it can be replaced in just a few minutes. The first step is to power off the equipment and remove the spark plug wire. The cover should be removed to get access to the wound spool assembly. Switch it out with the replacement part.This wound spool assembly is sold as an individual part. It is a genuine OEM replacement part that is directly sourced from the manufacturer. The spool assembly is designed to be compatible with string trimmers and pole pruners manufactured by Poulan, Poulan Pro, and Husqvarna.

This is the outer cover for a string trimmer housing. It clips into the bottom of the reel and secures it in place behind the central button. It’s constructed from a rubberized black plastic. This plastic is designed to be as durable as possible, while also flexing slightly when it’s under pressure. The cover serves two primary functions. It holds the reel in place and also acts as a mounting point for the central button. While it’s quite durable, it may eventually wear out due to regular use. A few scratches aren’t going to put a cover out of commission, but look for areas where the plastic has been worn through all the way. Replacing the cover is easy. Simply squeeze the old cover and pop it off the assembly. Position the new cover over the reel, then snap it into place. This cover is used primarily on Husqvarna string trimmers but is also used on some Poulan and Craftsman models. This is an OEM part sourced directly from Husqvarna, and it is sold individually.

This is the outer cover for a string trimmer housing. It clips into the bottom of the reel and secures it in place behind the central button. It’s constructed from a rubberized black plastic. This plastic is designed to be as durable as possible, while also flexing slightly when it’s under pressure. The cover serves two primary functions. It holds the reel in place and also acts as a mounting point for the central button. While it’s quite durable, it may eventually wear out due to regular use. A few scratches aren’t going to put a cover out of commission, but look for areas where the plastic has been worn through all the way. Replacing the cover is easy. Simply squeeze the old cover and pop it off the assembly. Position the new cover over the reel, then snap it into place. This cover is used primarily on Husqvarna string trimmers but is also used on some Poulan and Craftsman models. This is an OEM part sourced directly from Husqvarna, and it is sold individually.

This is a replacement knob for a trimmer. The plastic bump knob, which is connected to a spring, is used to secure the spool. A bump knob on a trimmer may get stuck or seized and will need a replacement. Before replacing the bump knob, remove the wire from the spark plug to avoid the accidental starting of the engine. Pull off the trimmer head housing and then use a flat head screwdriver to detach the old knob. Rotate it and then remove the component. Make sure the spring is in place then align the knob before rotating and snapping it in place. Take note that pulling the knob off may take extreme force when pulling. Some knobs are screw-mounted and a counterclockwise turn is necessary to unscrew it. This genuine OEM replacement part is sold individually and is compatible with specific trimmer models from Poulan and Weed Eater.