Parts for Husqvarna 125LSST: Driveshaft / Handle / Shield Parts

This replacement screw is OEM and has been directly sourced from the manufacturer. The screw is used in many machines, including lawnmowers, tractors, tillers, and other lawn and garden equipment.These screws will be subject to normal wear like any other part. They should be inspected every year before using the equipment for rust or to see if any have fallen out or broken off. If any extra motion from the deck or the engine is noticeable, check the screws to ensure they don't need to be tightened. Failure to do so can cause damage to the mower and cause other parts to need replacement. Before checking the screws, make sure the mower has cooled off enough to touch. Letting the mower cool for a couple of hours is best to avoid burns. The screws can be tightened with a screwdriver. The screw is a genuine OEM replacement part. It is designed to be used with Husqvarna, Craftsman, Troy-Bilt, Cub Cadet, Poulan, Mcculloch, and Jonsered machines.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This replacement part is a spring trigger and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This specific part is commonly found in trimmers or edgers. This spring helps create torque and assists the other parts of the appliance to run smoothly and efficiently. A new spring trigger might be needed if the current one is damaged or broken in any way such as being stripped or snapped due to normal wear and tear. If the user notices parts that are no longer working together, it could be because the spring is faulty. It is not unusual for this part to become damaged due to the nature of the spring. Be sure to reference the proper owner's manual before beginning this repair. This spring trigger is sold individually and is sourced directly from the manufacturer to ensure a proper fit. This is also and OEM replacement part.

This replacement part is a handle clamp. This is a genuine replacement part made by Husqvarna. This part works with the handle of many lawn mowers and is able to maintain the functions of the handle itself. A new handle clamp might be needed if the current one has become damaged. This can be due to normal wear and tear and should be replaced if this is the case. If the functions of the handle are no longer working properly, it might be due to a malfunctioning handle clamp. Work gloves are recommended to ensure safety during the repair job. Be sure the engine is completely shut down during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

This is a shield bracket for use with line trimmers. The bracket is used to help hold and support the debris shield to the trimmer shaft. If this piece is broken or not working properly, it means that the deflector will not be attached correctly, and the debris will not go where it should. Owners who find that the shield bracket has an issue will want to replace it as soon as possible.The shield bracket is made from durable metal, but it could still become damaged or corroded over time. If there is damage, the owners can make the simple replacement on their own. It is important that they remove the spark plug wire before making the installation, though. They should also wear gloves to keep their hands safe.The shield bracket is compatible with select models of line trimmers from Husqvarna, Weed Eater, Poulan, and Jonsered. The piece is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This is a gearbox assembly that is intended for use with trimmers and brush cutters. A gearbox assembly is a device that transfers power from one component to another. It increases torque while reducing speed. This gearbox assembly is manufactured out of a high-quality metal material.A new gearbox may be needed if the unit is making any strange grinding noises, if there is a burning smell, if the trimmer spins erratically, or if it does not spin at all. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines. Never perform care and maintenance on an outdoor power equipment machine that is powered on.This gearbox assembly is a genuine OEM Husqvarna part. It is sold individually. This particular gearbox assembly is compatible with trimmers and brushcutters that are manufactured by Husqvarna, Craftsman, and Poulan.

This trimmer head holds the line that is used to trim foliage and hedges in the yard. The trimmer head is made of durable plastic and helps control how much line is being used when the equipment is running. It can become damaged during use and will need to be replaced.Wear and tear can happen with a trimmer head. It's also possible to bang the head into something else and notice that it has become damaged or broken. If any of these situations occur, replacing the head is the only option. A flathead screwdriver can be used to loosen the head so it can be removed. Take the old head off of the nut on the bottom of the shaft to loosen it. Afterward, place the new trimmer head onto the shaft and tighten it before use.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The trimmer head is sold individually. It is made to be used with string trimmers manufactured by Poulan and Husqvarna.