Parts for Craftsman 358791590: Driveshaft / Shield / Handle Parts

This throttle assembly cable is manufactured by Craftsman, but also used by Poulan, to regulate the flow of fuel to certain small gasoline-powered engines. This assembly houses the throttle trigger that is used by almost a dozen different machines, including not only trimmers, but also pole saws and other small gasoline-powered tools. Apart from the cutting edges of the pole saws and trimmers, the parts of these devices that sees the most wear and tear, and is most likely to fail, are the throttle assemblies. Whether banged about because of proximity to the throttle trigger or simply because it's the only part protruding from the mid-body of the typical weed cutter, the throttle assembly housing and cable are susceptible to failure. Most often, failure of the cable is the result of one of the buds, attached at the ends to clasp securely, having broken off. In this case, the gasoline engine may start, but will not rev or only does so sporadically. Replacing the cable is a matter of removing the throttle housing and trigger as well as detaching the cable from the carburetor. When replacing the cable, be sure to use one like this, which is a genuine OEM replacement part, manufactured to replicate the specs of the original.

This replacement part is a screw. This part is a genuine replacement part made by Husqvarna. Screws are small but important in many different types of machinery. Screws are able to hold different parts in place and help them stay secure during use so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is missing or damaged in any way. It is possible that the screw can become stripped over time and therefore not stay in place properly. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require a screwdriver and possible pliers. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. Note that This is a genuine OEM replacement part.

This is a replacement purge bulb. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective purge bulb on various models of outdoor power equipment. The purge bulb purges air from the carburetor and draws in fuel from the fuel tank to allow the engine to start. Over time, the purge bulb can crack or become brittle, requiring replacement. Proper tools are required to replace this part and work gloves are advised. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. For more accurate information on how and where to install this purge bulb, the appropriate owner's manual and included diagrams should be referenced. As an authentic replacement part, this purge bulb is suitable for use on several different models of small engine power equipment such as string trimmers, leaf blowers, and edgers manufactured by Husqvarna, Craftsman, WeedEater, and Poulan. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This genuine Husqvarna wire assembly can be used as a replacement part for string trimmers and pole pruners. The wire assembly is located in the tube to which the handle set and the motor housing assembly are attached on opposite ends. The purpose of a wire assembly for these small engine outdoor appliances is to transmit electrical power through the tube to the handle set and the motor housing assembly on either end.A wire assembly might have to be ordered as a replacement if it becomes frayed or otherwise damaged. This damage could occur from general long-term usage, exposure to the elements, or corrosion to the material as a result of a collision. If this kind of damage occurs, this genuine OEM replacement wire assembly should be ordered immediately. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This wire assembly is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

This is a throttle housing designed to go around the throttle cable, trigger, and wire to keep all of those components secure and protected. It's made of durable plastic but wear and tear or impact can damage or break the throttle housing.It's easy to determine with visual inspection if the throttle housing needs to be replaced. A pair of work gloves and an Allen wrench will be needed to complete the repair. The process involves taking out a set of four screws that hold the old throttle housing. Take it off of the equipment and install the new one using the same screws. Once the new housing is placed, the equipment can be used as normal.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The throttle housing is made for use with string trimmers and pole pruners manufactured by Poulan, Poulan Pro, and Craftsman. This part is sold individually. This part is sold individually.

The handle assist is the handle that is held to steer and control the machine during the trimming process. As the primary touchpoint, the handle has to provide enough comfort while assisting with the machine's function. This handle is designed to be gloves-friendly with a surface rough enough to provide security against slip. Use this as a replacement for a broken, loose, or worn handle. Remember always to hold the handle firmly while operating. This part is designed for use on trimmers or weed cutters made by Craftsman, Weed Eater, Poulan, or Poulan Pro. This is a genuine OEM replacement handle that will provide extra control and less hand fatigue. It is sold individually.

This replacement part is an upper shaft and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. This upper shaft is typically found in hedge trimmers and is an important part to this appliance. This part is able to connect the power source from the top of the appliance to the trimmer head at the bottom so that the drive mechanisms is activated. A new upper shaft might be needed if the user is unable to control the mechanisms at the bottom of the trimmer. It is possible that the upper shaft might need to be replaced after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This is a shield bracket for use with line trimmers. The bracket is used to help hold and support the debris shield to the trimmer shaft. If this piece is broken or not working properly, it means that the deflector will not be attached correctly, and the debris will not go where it should. Owners who find that the shield bracket has an issue will want to replace it as soon as possible.The shield bracket is made from durable metal, but it could still become damaged or corroded over time. If there is damage, the owners can make the simple replacement on their own. It is important that they remove the spark plug wire before making the installation, though. They should also wear gloves to keep their hands safe.The shield bracket is compatible with select models of line trimmers from Husqvarna, Weed Eater, Poulan, and Jonsered. The piece is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This part is a trimmer head, which is a component of a lawn and garden power trimmer. The trimmer head attaches to the driveshaft and also houses the string which acts as a cutting line.A new trimmer head may be needed if the original is cracked, broken, or damaged in any way. Damage is most likely caused by direct and forceful impact with a hard object or surface. Because of the nature and use of a trimmer, this component may need to be replaced after wear and tear over a period of time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This trimmer head is a genuine Husqvarna part. It is sold individually. This particular trimmer head is compatible with lawn and garden power trimmers that are manufactured by the Husqvarna brand.

This part is a replacement spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current spring is broken or defective, this part can be used as a replacement. It is intended for use with trimmers.The spring works by applying tension to the head of the trimmer. Over time and with regular use, springs can easily break or become eroded, requiring replacement. When working on or near an engine or blades, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this spring, the appropriate owner's manual and equipment diagrams should be referenced. This spring is suitable for use on a variety of trimmer models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This is the outer cover for a string trimmer housing. It clips into the bottom of the reel and secures it in place behind the central button. It’s constructed from a rubberized black plastic. This plastic is designed to be as durable as possible, while also flexing slightly when it’s under pressure. The cover serves two primary functions. It holds the reel in place and also acts as a mounting point for the central button. While it’s quite durable, it may eventually wear out due to regular use. A few scratches aren’t going to put a cover out of commission, but look for areas where the plastic has been worn through all the way. Replacing the cover is easy. Simply squeeze the old cover and pop it off the assembly. Position the new cover over the reel, then snap it into place. This cover is used primarily on Husqvarna string trimmers but is also used on some Poulan and Craftsman models. This is an OEM part sourced directly from Husqvarna, and it is sold individually.

This is the outer cover for a string trimmer housing. It clips into the bottom of the reel and secures it in place behind the central button. It’s constructed from a rubberized black plastic. This plastic is designed to be as durable as possible, while also flexing slightly when it’s under pressure. The cover serves two primary functions. It holds the reel in place and also acts as a mounting point for the central button. While it’s quite durable, it may eventually wear out due to regular use. A few scratches aren’t going to put a cover out of commission, but look for areas where the plastic has been worn through all the way. Replacing the cover is easy. Simply squeeze the old cover and pop it off the assembly. Position the new cover over the reel, then snap it into place. This cover is used primarily on Husqvarna string trimmers but is also used on some Poulan and Craftsman models. This is an OEM part sourced directly from Husqvarna, and it is sold individually.

This is a replacement knob for a trimmer. The plastic bump knob, which is connected to a spring, is used to secure the spool. A bump knob on a trimmer may get stuck or seized and will need a replacement. Before replacing the bump knob, remove the wire from the spark plug to avoid the accidental starting of the engine. Pull off the trimmer head housing and then use a flat head screwdriver to detach the old knob. Rotate it and then remove the component. Make sure the spring is in place then align the knob before rotating and snapping it in place. Take note that pulling the knob off may take extreme force when pulling. Some knobs are screw-mounted and a counterclockwise turn is necessary to unscrew it. This genuine OEM replacement part is sold individually and is compatible with specific trimmer models from Poulan and Weed Eater.