Parts for Weedeater BC2500LE TYPE 3: Driveshaft / Shield / Handle Parts

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This authentic OEM replacement on/off switch is a safety measure that manufacturers install to prevent the chainsaw or trimmer from starting before the operator is ready. It also allows the operator to stop their appliance at a moment's notice if they lose control of it. The on/off switch is located in or near the handle of the appliance and must be in the on position for the appliance to start. If hit to the off position, the appliance will immediately stop running. Switches can slowly wear out over time due to repeated use. When it wears out, the switch will no longer give the same amount of resistance and may be tripped more easily. This can be frustrating as it means that the operator would have to continually restart their appliance. To replace the switch, use a screwdriver to access the handle interior and detach the wiring from the old switch. Install the new part and reassemble. This switch is a high-quality replacement part for Craftsman chainsaws and trimmers, and as such, it comes sourced directly from the original manufacturer. This part ships individually.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement part in string trimmers, edgers, chainsaws, and pole pruners.The screw in a small engine outdoor appliance might eventually have to be replaced in the case that the screw is lost, misplaced, or damaged from general wear and tear with long-term use. If the screw is lost or misplaced and its absence is noted by the operator, the screw should be replaced by this genuine OEM replacement part as soon as possible. If the screw is dented, cracked, punctured, or otherwise damaged, it should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

This part is a replacement washer. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or misplaced washer in a variety of outdoor power equipment, although it is primarily intended for use with line trimmers. Washers provide a better bearing surface for a screw or bolt. Over time, washers can easily become corroded, broken, or misplaced, requiring replacement. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this washer, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this washer is suitable for use on several models of line trimmers and other outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a washer. This part is small but important in various types of machinery. Washers work with other small parts like screws and nuts to ensure that components are secured within the equipment.A new washer might be needed if the current one is worn down or otherwise damaged. Work gloves are recommended when working with small parts. Be sure the engine is powered down before attempting to complete this job.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This part is a replacement nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current nut is defective or broken, this part can be used as a replacement. It is intended for use with outdoor power equipment.Nuts are a standard piece of hardware and are essential as they secure together different components. This part should be replaced if stripped, corroded, lost, or broken in any way. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this nut base, the appropriate owner's manual and equipment diagrams should be referenced.This nut is suitable for use on a variety of lawn mower models manufactured by Husqvarna, Poulan, other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

The spool retainer replacement is used for trimmers and pruners. It helps to secure the spool in the hub assembly of the machines, so it will hold the line or string. Without a functioning spool retainer, it would be impossible to use the machine properly. The spool retainer can start to wear out over time and no longer function correctly. It might become broken, as well. Replacing the retainer is essential, and it is an easy replacement to make. The spool can be pressed into the hub assembly and it releases just as easily. This is a genuine OEM replacement part that is sold individually. It works with certain makes and models of pole pruners and trimmers. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro. When buyers are choosing the new spool retainer, they should ensure they are buying the correct replacement part.