Need Help?
Call or text
Show parts
This genuine Husqvarna throttle kit can be used as a replacement part for string trimmers. This throttle kit contains the throttle cable as well as the throttle trigger. The function of a throttle cable is to connect and facilitate the use of the throttle trigger, which allows the engine to idle upon activating it.A throttle kit might have to be ordered as a complete replacement for a damaged throttle cable and throttle trigger in the event that both parts are compromised. This damage can manifest in the form of punctures, holes, erosion, or a direct impact collision that warps the throttle components such that they cannot perform their basic functions. If any of these forms of damage affect the throttle cable and throttle trigger, this genuine OEM throttle kit should be ordered as a replacement. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This throttle kit is compatible with the following brands: Husqvarna, Craftsman, Poulan, Weed Eater, Paramount, and Turf King.
Usually ships within 4 - 14 days
This trigger, used by Poulan and Weed Eater trimmers and edgers, controls the flow of gasoline into the carburetor so as to increase or decrease the speed of the rotating trimmer twine. The trigger is attached to the trimmer's throttle cable assembly. Though designed and used specifically by Weed Eater and Poulan, more than 85 different gasoline-powered devices use this trigger to regulate gas flow. While made of rugged plastic, the throttle trigger is often susceptible to more wear and tear than almost any other part of the trimmer. It sticks out away from the body of the device and thus is most susceptible. Being constantly squeezed, banged into other pieces of equipment, cement sidewalks, trees, landscaping barriers, and the like, throttle triggers can become bent, broken or irreparably disconnected from the throttle of the yard tool. Replacing the trigger begins with draining fuel from the trimmer's tank, then removing the throttle housing. Remove the throttle cable from the old trigger and install it in the new trigger. Replace the throttle housing. When replacing the trigger, it's best to use a genuine OEM replacement part, like this one, machined to be identical to the original.
This handle is a genuine Husqvarna part. It is also sometimes called a throttle housing. It is manufactured as a replacement part for weed wackers, trimmers, and line trimmers. It is not uncommon for the handle to become worn over time, especially under heavy or frequent use. It will be visibly worn and uncomfortable to grip.To make this repair, empty the fuel tank, disconnect the spark plug, and let the engine cool completely. The handle is attached by screws. Remove the screws to separate the two halves of the handle. The spring, throttle control trigger, and throttle cable will need to be removed in order to disconnect the other half of the handle and fully replace it.This is a genuine OEM part sourced directly from the manufacturer. It is sold individually so consider whether both sides need to be replaced. It is compatible with machines made by Craftsman, Husqvarna, Poulan, and Weed Eater.
This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or misplaced screw in a variety of lawn equipment. This screw is a high-quality piece of standard hardware with multiple different uses. Screws are essential for securing parts of the equipment, but can easily become lost, stripped, or otherwise damaged. If screws are missing, it can affect the functionality of the equipment. A Phillips head or flat head screwdriver can be used to install this screw. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several models of lawn equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.
This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.
This part is discontinued by the manufacturer and is no longer available for purchase.
This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation instructions and usage guidance, it is recommended to refer to the equipment diagram supplied specifically by the manufacturer. It's common over time and with regular usage for screws to easily become stripped, rusted, broken, or lost. This can lead to improper functionality of outdoor power equipment. It's important to always use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable metal. This replacement screw is designed to various models of trimmers and hedge trimmers, blowers, and chainsaws manufactured by Husqvarna, Craftsman, Poulan, and Weed Eater. Please note this screw is a genuine OEM part made of durable, non-corrosive metal and is sold individually.
This spring is a genuine Husqvarna part, sold individually. This spring can be used as a replacement part for a string trimmer. The purpose of a spring for a string trimmer is to maintain the secure and stable placement of one or more components so they are kept in place through spring tension.If this part is damaged, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, and Poulan.
The spool retainer replacement is used for trimmers and pruners. It helps to secure the spool in the hub assembly of the machines, so it will hold the line or string. Without a functioning spool retainer, it would be impossible to use the machine properly. The spool retainer can start to wear out over time and no longer function correctly. It might become broken, as well. Replacing the retainer is essential, and it is an easy replacement to make. The spool can be pressed into the hub assembly and it releases just as easily. This is a genuine OEM replacement part that is sold individually. It works with certain makes and models of pole pruners and trimmers. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro. When buyers are choosing the new spool retainer, they should ensure they are buying the correct replacement part.