Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.
This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.
This trigger, used by Poulan and Weed Eater trimmers and edgers, controls the flow of gasoline into the carburetor so as to increase or decrease the speed of the rotating trimmer twine. The trigger is attached to the trimmer's throttle cable assembly. Though designed and used specifically by Weed Eater and Poulan, more than 85 different gasoline-powered devices use this trigger to regulate gas flow. While made of rugged plastic, the throttle trigger is often susceptible to more wear and tear than almost any other part of the trimmer. It sticks out away from the body of the device and thus is most susceptible. Being constantly squeezed, banged into other pieces of equipment, cement sidewalks, trees, landscaping barriers, and the like, throttle triggers can become bent, broken or irreparably disconnected from the throttle of the yard tool. Replacing the trigger begins with draining fuel from the trimmer's tank, then removing the throttle housing. Remove the throttle cable from the old trigger and install it in the new trigger. Replace the throttle housing. When replacing the trigger, it's best to use a genuine OEM replacement part, like this one, machined to be identical to the original.
This part is discontinued by the manufacturer and is no longer available for purchase.
This replacement part is an assembly wire guard. This part is commonly found in line trimmers or edgers and is responsible for assisting the user in performing an accurate cut during any job. A new assembly wire guard might be needed if the current one is missing or damaged in any way. This can be from wear and tear after years of normal use or from a single incident that may have caused it to no longer work properly. If the assembly has become dented, bent, or cracked, it might be time to replace it. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.
This spring is a genuine Husqvarna part, sold individually. This spring can be used as a replacement part for a string trimmer. The purpose of a spring for a string trimmer is to maintain the secure and stable placement of one or more components so they are kept in place through spring tension.If this part is damaged, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, and Poulan.
The spool retainer replacement is used for trimmers and pruners. It helps to secure the spool in the hub assembly of the machines, so it will hold the line or string. Without a functioning spool retainer, it would be impossible to use the machine properly. The spool retainer can start to wear out over time and no longer function correctly. It might become broken, as well. Replacing the retainer is essential, and it is an easy replacement to make. The spool can be pressed into the hub assembly and it releases just as easily. This is a genuine OEM replacement part that is sold individually. It works with certain makes and models of pole pruners and trimmers. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro. When buyers are choosing the new spool retainer, they should ensure they are buying the correct replacement part.