Parts for Ge GFD35GSSY0WW: Drum Parts

8-18 hi/lo 5/8

If your dryer is noisy or the drum wobbles, this rear drum support bracket holds and aligns the drum for smooth, quiet rotation and reduced wear.

Drum roller assembly with axle and clips that supports the dryer drum and allows smooth rotation. Replace if worn, cracked, or causing loud noises.

This pulley nut secures the washer's drive pulley to the shaft to keep the belt aligned and power transfer reliable. Replacing a worn or missing nut restores stable spin performance and helps prevent belt slippage and noise.

• Locks the drive pulley to the shaft for proper belt alignment and consistent power transfer
• A loose or stripped nut can cause pulley wobble, belt squeal, slippage, or the belt coming off
• Replace if the original nut is damaged, missing, or will not stay tight after adjustment

• Disconnect power and water supply; safely tip or elevate the washer for bottom access
• Remove the drive belt; hold the pulley while loosening the nut (verify thread direction—do not force)
• Hand-start the new nut to avoid cross-threading; tighten securely per service information and confirm pulley runs true
• Reinstall the belt, verify alignment, and rotate by hand before restoring power

Black. 8-18 AB HXW 3/8

Size: 8 - 18 ab.

This is a screw and flat washer set used to secure the drum baffles (lifters) inside a dryer drum. The baffles tumble clothing during the drying cycle, and these fasteners keep them firmly attached. Replace if the screws are stripped, missing, or corroded, which can cause baffles to come loose and create rattling noises during operation.

This is a drum baffle (also called a lifter) that mounts inside the dryer drum to tumble and separate clothes during the drying cycle. It helps promote even airflow and heat distribution by lifting and turning laundry as the drum rotates. Replace this part if the baffle is cracked, broken, or has come loose from the drum, which can cause clothes to clump together and dry unevenly.

This replacement dryer drum is the rotating tub that holds clothes and allows tumbling during the dry cycle. Replacing a worn or damaged drum restores smooth rotation and helps eliminate rubbing or scraping noises. What it does

• Provides the rotating surface that carries clothes through the dryer drum cycle.
• Restores smooth, balanced tumbling when the original drum is dented, scored, or bent.
• Stops metal-on-metal scraping or grinding noises caused by drum damage or warp.
• Helps resolve drum wobble or uneven rotation that can catch or damage fabric.

• Disconnect power to the dryer before beginning any service; for gas dryers also shut off the gas supply.
• Support the drum when removing panels and retainers to avoid dropping or damaging the new drum.
• Inspect and replace related wear items as needed if visible wear is present.

Dryer not heating? A faulty thermistor inlet fails to monitor air temperature, preventing proper heating cycles. Direct replacement restores function.

This dryer drum baffle installs inside the rotating drum to help tumble clothes efficiently. Replace if cracked, broken, or missing for proper operation.