Parts for Troy-Bilt 41BDT2EC063: Edger Add-On Parts

This replacement part is a carburetor replacement kit. This kit includes everything needed to repair or rebuild a carburetor.Be sure to diagnose the issue before purchasing this kit to ensure that the needed parts are included. A damaged carburetor may cause hard starting or black smoke exhaust during use. Wear work gloves when working with the carburetor. The engine should be powered down and cooled off before starting this job.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This piston ring set is a genuine MTD part, sold individually. This piston ring set can be used as a replacement part for outdoor appliances with engines such as snowblowers, tillers, string trimmers, leaf vacuums, and leaf blowers. Piston rings prevent fuel leakages while fuel is being taken in by the engine or while the flow of fuel is being regulated. Piston rings might have to be replaced if they are damaged, which can happen with prolonged use. If a damaged piston ring is not immediately replaced, it could result in oil leakages, which can cause more severe damage to hard-to-replace internal components. Damaged piston rings should be replaced immediately upon signs or symptoms of damage. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This piston ring set is compatible with the following brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, and Yard-Man.

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Screws are found in almost every different type of machinery and are essential to the overall performance of different devices. Screws are responsible for holding things in place and securing them tightly so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is damaged or missing. It is possible for screws to be stripped over time and can become stuck in place. In this case, pliers might be needed to remove the faulty screw. Otherwise, this repair should be fairly simple and only require a screwdriver. Be sure the machine is powered down before replacing this part. This specific screw is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as many devices require more than one.

This is a genuine replacement screw designed for use in select MTD engines on lawn and garden equipment. Specifically, this is an anti-rotation screw, which is used to stop the drive shaft housing from turning inside of the main housing assembly. This screw is a small part that is subject to constant vibrations, pressure, and high temperatures. It can sometimes become worn or damaged as a result or even break off entirely, which would mean that the inner housing would no longer be held in place accordingly. If this screw is damaged or lost, it needs to be replaced with a genuine OEM replacement as soon as possible. This MTD anti-rotation screw is manufactured with high-quality materials and designed for use in select trimmers from MTD, RYOBI, Yard-Man, Troy-Bilt, Murray, Cub Cadet, Yard Machines, and Bolens. This replacement will require a screwdriver. Simply remove the damaged screw, if it is not already missing, from the clutch cover assembly, and then install the new screw. It should only take a few minutes to perform the replacement. Be sure to wear gloves to protect the hands. This screw is sold individually and does not include any additional parts or hardware.

This is a trimmer head used with string trimmers, weed wackers, and edgers. When in use, it rotates, cutting grass. If the trimmer head stops rotating or cutting grass, it is time to order a replacement part. In order to complete the replacement process for trimmer heads, the user will need to pry the trimmer head off of the trimmer. Use a flathead screwdriver to loosen it. After pulling the old trimmer head off the nut on the bottom of the shaft, insert this replacement head onto the trimmer shaft.This trimmer head is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

This reel spool assembly is specifically designed for use with string trimmers and comes with all necessary parts, including the trimmer line and the spool. The line itself is used when the trimmer is in use to cut grass and foliage. The spool is the component that the string is wrapped around to keep it secure while using the trimmer.If the reel spool or the line is damaged or broken, the reel spool assembly should be replaced. A wrench or a screwdriver will be needed to go through the process. When replacing the parts in the reel spool assembly, the spool cover will need to be removed. Make sure the string trimmer is on a sturdy surface and the spark plug wire has been disconnected. Place the spool assembly in the housing, feed the line, and replace the cap.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The reel spool assembly is compatible with many string trimmers manufactured by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.

This replacement part is a blade guard, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This blade guard is typically found in edgers and is used to shield the blade so that if something where to happen during use, the person using the appliance and those in the vicinity will be protected from the open blade. A new blade guard might be needed if the current one is damaged or missing from the appliance. If the blade of the edger is completely exposed it is recommended that a replacement blade guard be installed as soon as possible. This part is used to protect the user and those around them while using the appliance.This blade guard is sold individually and is a genuine OEM part. Be sure to wear gloves while attempting to replace this part as the user will be working close to the blade of the appliance.

A shoulder strap is a strap made to be attached to machinery in order to make the use of the machine easier, less awkward, and more comfortable for the user. It designed for use with outdoor lawn and garden equipment such as string trimmers, leaf blowers, and pole pruners. Fortunately, if a shoulder strap breaks, it will be very obvious and is easily fixed. Signs of a faulty shoulder strap include frayed edges, worn or thin fabric, or faulty attaching mechanisms holding the strap to the machine. The replacement or repair process is incredibly simple, as it requires no technical savvy or internal part replacement. Everything requiring replacement is visible from the outside of the machine.This shoulder strap is also sometimes referred to simply as a backpack harness assembly strap. The purchase of the shoulder strap does include any necessary mounting hardware needed to attach it to outdoor equipment. The shoulder strap is built to last and create a more pleasant experience while using a blower, vacuum, or pruner.This shoulder strap is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. In most cases, since each strap is sold separately, if the user prefers to attach the shoulder straps in a way that resembles a backpack or harness instead of just a single shoulder strap, the purchase of two separate shoulder straps will be necessary. This particular backpack harness assembly strap is compatible for use with machines made by Craftsman, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

Made for edgers and trimmers, the edger blade is a quality replacement component. This part is responsible for edging level ground near sidewalks and driveways to create an appealing aesthetic. When the equipment is used on a regular basis, the edger blade will start to get dull and will not provide the same performance as it did when new. If the edger blade has become dull and is smaller than it was originally, it's likely that it should be replaced.Take a look at the edger blade to see if there is any damage. If it has a chipper blade or other issues, it needs to be replaced. The edger blade can be reached by placing the tool on its side on a stable surface and using a screwdriver to ensure the spindle is locked. The washer nut will need to be removed to make the replacement.This is an edger blade that is made to be used with string trimmers and edgers manufactured by MTD, Ryobi, and Troy-Bilt. It is sold as an individual part. The edger blade is a genuine OEM replacement part that is sourced directly from the manufacturer.

This blade retainer kit is designed for use with string trimmers and edgers by many manufacturers. It comes with a metal retaining washer that is used with the blade, as well as the needed spool cutting heads. This kit also includes the nut needed to fasten the blade to the gearcase. It is used to install a blade onto the trimmer while adding stabilization through the nut. The parts in the blade retainer kit can become worn out during use and may need to be replaced.When the blade needs to be replaced or a part of the blade retainer kit is broken, removing the parts is required. Moving the blade involves turning the retaining bolt while the equipment is on a level surface. Next, undo the bolt holding the blade so it can be removed. The blade can be replaced at this time, as well as the parts from this blade retainer kit.This blade retainer kit is made for edgers and string trimmers manufactured by Yard-Man, Craftsman, Bolens, Ryobi, MTD, Troy-Bilt, and Yard Machines. It is a single retainer kit that comes as a genuine OEM replacement part sourced directly from the manufacturer.

This is a blade lock nut that is typically a component of string trimmers and edgers. The blade lock nut ensures the cutting blade is securely attached to the shaft of the trimmer. If the nut is corroded, broken, or has come loose, it will need to be replaced. The equipment should not be operated without this nut since other components could come loose and fall off.This is a simple part to replace and will require only a wrench or a socket set. This nut is located on the spindle, so a visual inspection can be done to ensure it is damaged or broken. Remove it and thread the new blade lock nut to the same location. If the nut is stripped, a bolt remover can be used to get it off of the lawn equipment.This blade lock nut is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is made to fit a variety of edgers and string trimmers manufactured by Craftsman, Cub Cadet, MTD, Ryobi, and Yard Machines.

This replacement part is a nut, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Nuts are a small part found in many different types of machinery and are used to connect different parts and secure things together.A new nut might be needed if the current ones are missing or damaged in any way. It is common that nuts become stripped overtime and might get stuck or fall out of place. In this case, it is recommended that the nut be replaced. Be sure to review the specific owner's manual for more information on how to replace the nuts. This part is sold as an individual piece. Be sure to purchase the correct amount as many different machines use more than one during operation. This is also a genuine OEM replacement part sourced directly from the manufacturer.