Need Help?
Call or text
Show parts
This part is discontinued by the manufacturer and is no longer available for purchase.
Usually ships within 4 - 14 days
This genuine rocker switch is designed as an identical replacement part for select models of blower/vacuum units. The rocker switch is also known as a power switch or on/off switch and it is what controls the current to electric blowers. The switch is made of plastic and metal. This switch may become worn and not function well after regular use because of the repetitive motion of turning the machine on and off. In some cases, the switch may experience electrical malfunctions that could present a fire hazard or keep the unit from working at all. In the event that the switch is damaged or defective, it will need to be replaced. This genuine OEM replacement rocker switch is manufactured by Briggs & Stratton. It can be used with more than 150 models of machines from Briggs & Stratton, Toro, and Vanguard. This part is made of durable plastic and metal components and is sold as an individual unit. It plugs into the pressure washer via wires, but a screwdriver may be needed to assist in the installation. Always disconnect the power supply when working on electrical components and wear gloves for safety.
This replacement part is a switch key. This is a genuine replacement part made by Midwest Engine. This part is commonly found installed within certain lawn mowers and is able to ensure that the user can turn the machine on and off according to the desired settings. A new switch key might be needed if the current one is unable to turn the machine on or off. This can be caused by normal wear and tear over time. If the key is no longer working, it can be due to this part being damaged. This should be a fairly simple repair and should only use common household tools. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.
This genuine starter solenoid transfers electrical current from the battery to the starter during the engine starting process, allowing the engine to engage. This part could become worn over time or develop electrical malfunctions, which could eventually lead to a need for a full replacement. In the event that the solenoid goes bad, it could result in poor engine performance or not permit the engine to start at all. This replacement part could provide an exact fit for compatible lawn and garden units. This genuine OEM solenoid from Briggs & Stratton is manufactured to exact specifications. It is compatible with engines used in select models of generators and other lawn and garden equipment made by the brand. This genuine OEM part is sold individually and does not include any hardware or additional components. It is imperative to disengage the spark plug and allow the engine to cool before performing engine repairs like replacing the starter solenoid. A wrench or socket set will be required to disconnect the old solenoid and install the new unit and gloves should be worn for hand protection.
An ignition key set is used with a variety of lawn and garden equipment. When it's turned in the ignition slot, it will start the lawnmower, pressure washer, or other equipment. This set comes with two keys and a keyring to make it less likely that one will be lost. Ignition keys sometimes become damaged or broken and some people lose them, which means a replacement set is required.If a set of keys is lost or has been damaged, a new set will be needed to operate a lawnmower or other equipment. There is no installation process involved, so there's no need for additional tools. Once the replacement ignition key set is acquired, it can be used to get equipment back up and running. Simply turn the key to engage the motor and the lawn equipment will be ready to use.This ignition key set is designed for use with lawnmowers, wood chippers, snowblowers, generators, tillers, and pressure washers. It is compatible with equipment from Briggs & Stratton, Simplicity, Craftsman, Snapper, Cub Cadet, and Murray. This is a genuine OEM replacement part that comes as an individual component that consists of two silver keys on a ring.
This key set is designed as a replacement and it is specifically for select models of snowblower. The ignition key is used as a means to turn on the machine. It makes using the machine easier than having a pull-start engine. This key is red, which can be helpful in case it was dropped in the snow – it will be easy to find. The key provides more safety for the machine, preventing unauthorized people from using the equipment. The key may need to be replaced for certain reasons. The current key could become lost, or it could be damaged. If it is damaged, there is a chance that it might no longer fit properly into the ignition. Owners should get a new key rather than risk breaking a key in the snowblower's ignition. This is a genuine OEM key set right from the manufacturer. It is sold individually, and some might want to buy more than one at a time, just to have them available. The keys are compatible with certain snowblower models from Briggs & Stratton, Toro, Murray, Snapper, and Simplicity.
This brush retainer is part of the starter motor on many types of lawn and garden machinery. It comes with both the retainer and a set of four brushes. The main job of the brush retainer is to hold a set of carbon brushes against the commutator bars located on the armature. If the brush retainer is worn, damaged, or improperly seated, it can cause problems with the equipment. The starter motor will not be able to get the proper amount of current from the battery.If the brush retainer might be causing problems, a visual inspection can be performed. A damaged brush retainer can wear down to the wire lead and become burned, pitted, or cracked. When the brush retainer is worn out, it can decrease engine performance, reduce braking, and cause the motor to lose power. This brush retainer is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. The retainer is made to be used with lawnmowers, snowblowers, tillers, and wood chippers created by Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.