Parts for Mtd 33931A: Electrical System Parts

This is a simple set of lawnmower ignition keys. They’re also used for an array of riding mowers, lawn tractors, and even snowblowers. To simplify repair and replacement procedures, most manufacturers use standardized keys for all their machines in a given class. As a result, a single key can be used for dozens of machines. The keys are manufactured from stainless steel, with an INDAK logo stamped into the center. Regardless of whether the machine is a walk-behind mower or a full-sized lawn tractor, a keyed ignition is easier to operate than a recoil cord. Similarly, replacing a key is generally straightforward. The exception is if the old key has snapped off in the ignition. In this case, a set of needle-nosed pliers can sometimes be used to extract the key. A powerful magnet can also be helpful if the broken key is being stubborn. In the worst-case scenario, the ignition may need to be replaced. This is an OEM part sourced directly from MTD, and it is sold as a set of two.

The ignition switch is the part of lawn and garden equipment that features an ignition to turn on and off with a switch. These are common on lawn tractors, as well as some lawn mowers, wood chippers, tillers, and log splitters. While these switches tend to be robust, they may eventually wear out. Some might have a mechanical failure after being used for years. Others might have electrical issues. Regardless of the reason for the failure, they will need to be replaced to continue using the machine. This is a genuine OEM part that is sold individually. It is a complete kit, which will include not only the switch, but also a washer and nut to secure the switch into the housing, and two ignition keys. The ignition switch can work with lawn tractors from brands such as MTD, Ryobi, Troy-Bilt, Bolens, Yard Machines, and Craftsman.

This headlamp switch is a genuine MTD part. It is made for use with headlamps on front-mount mowers, garden tractors, and lawn tractors. It is installed on the dash panel and turns the headlamp on the tractor or mower on and off. This headlamp switch is a genuine OEM part sourced directly from the manufacturer and is sold individually. It is made from durable plastic with metal prongs. Replacing a damaged or malfunctioning headlamp switch is an easy repair that typically requires only a screwdriver.This part is made for compatibility with mowers and tractors manufactured by White Outdoors in the 1980s, 1990s, and early 2000s. It is also compatible with many models of MTD lawn tractors, as well as some made by Bolens, Cub Cadet, Husky, Ryobi, Troy-Bilt, Yard-Man, and Yard Machines. Use the compatibility checker before purchasing.

This part is a replacement ammeter. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective ammeter in a variety of lawn tractor models.The ammeter is important as it displays and measures the lawn tractor's current as it is generated by the engine. If this part is faulty in any way, it should be immediately replaced. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this ammeter, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this ammeter is suitable for use on several different models of lawn tractors manufactured by MTD, Craftsman, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

Here is a replacement 12-volt headlamp that can be used with certain types of lawn and garden equipment. The headlamp, sometimes called a headlight or a lightbulb, is used on the front of the machine. It is similar to headlights in a car and will allow the user to continue using the machine in low light or even dark conditions. The headlamp can suffer damage just like any other lightbulb. It will wear out over time and will need to be replaced. It could also be damaged if the machine runs over or into an object. The headlamp replacement is simple and should take most people only a few minutes to complete. Many buyers like to have a couple of replacement bulbs on hand just in case. This is a genuine OEM replacement part that is sold individually. It will work on many models of snowblowers and lawn tractor. Compatible brands include Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This is a spring switch that is used in many types of lawn and garden equipment, such as log splitters, lawnmowers, and tillers. The spring switch is made out of durable metal and is typically located near the switch button. With ordinary use, the spring switch can experience wear or other types of damage and stop working correctly. When this occurs, it will need to be replaced.If the spring switch is broken or bent, a screwdriver will be needed to replace it. The lawn equipment should be powered off and placed on a stable surface during the replacement. Disassemble the unit and locate the contacts to access the spring switch and other small parts. The original switch can be removed using a screwdriver so the new component can be installed. Reassemble and power the tool on before use.This spring switch is a genuine OEM replacement part that is sourced directly from the manufacturer. The component is sold on an individual basis. The part is made to be compatible with lawnmowers, snowblowers, tillers, log splitters, and wood chippers manufactured by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, MasterCut, and Turf King.