Need Help?
Call or text
Show parts
This part is discontinued by the manufacturer and is no longer available for purchase.
The Igniter is an OEM part for Fisher & Paykel ovens and ranges. As the spark generator for gas burners, it must reliably provide ignition each use.
Causes of a faulty igniter include direct wear and tear over extended cooking cycles. Mineral deposits accumulating on the electrode can also impair spark generation over time.
Symptoms of an igniter going bad include:
The replacement crankcase gasket seen here is for use with many different types of lawn and garden equipment. The purpose of the crankcase gasket is to fit between the crankcase and the crankcase cover. It helps to make sure that there are no oil leaks that could cause issues with the engine or make a mess when the machine is being stored. Owners should check on the gaskets when they are performing maintenance on their machines. Over time, the gaskets can start to crack or dry out. When this happens, it means that a leak is likely going to occur if it hasn't already. Owners will want to replace these gaskets regularly to ensure they do not have leaks. This is a genuine OEM replacement crankcase gasket that is sold individually. The durable gasket will work for models of many types of machines including lawn mowers, tillers, leaf blowers, generators, wood chippers, log splitters, and certain other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Simplicity, and Cub Cadet.
Usually ships within 4 - 14 days
This OEM starter grip is a replacement for select Briggs & Stratton engines. The starter rope grip provides the handle that is used to pull the starter rope. When it is pulled, the starter recoil spring engages the flywheel puller, which then causes the flywheel to rotate and starts the rotation of the blade as the engine fires. The starter rope grip is made of durable plastic but it can become damaged or cracked over time. If it is broken, the rope will be unable to be pulled to engage the engine until the part is replaced. This is a genuine starter grip designed to work with a variety of lawn and garden equipment that features a Briggs & Stratton engine with a pull-start. The starter grip is sold in two pieces with the grip and a cap that snaps on once the rope has been tied inside of the handle to secure it in place. The unit is sold individually. This item does not include the rope or any additional parts.
Color: White. Other colors: For pewter use 280098, for biscuit use 280097.
The Lawn & Garden Engine Microswitch 2-Pin NC is an essential component for maintaining the functionality of your lawn and garden equipment. This genuine OEM part ensures reliable performance by accurately controlling the engineGÇÖs operations. Designed with precision, the microswitch features a durable 2-pin normally closed configuration, providing consistent and dependable switching capabilities. Compatible with a wide range of Samsung lawn and garden engines, this part guarantees a perfect fit and seamless integration into your existing machinery. Installing the Lawn & Garden Engine Microswitch 2-Pin NC is straightforward, allowing you to quickly restore your equipmentGÇÖs performance without hassle. By choosing this genuine OEM part, you benefit from high-quality materials and craftsmanship, ensuring long-lasting durability and efficiency. Whether youGÇÖre repairing a mower, trimmer, or other garden engine, this microswitch delivers the functionality you need to keep your equipment running smoothly and effectively.
This ignition set consists of an ignition breaker and condenser. It is made of durable materials and uses a mechanical switch to close the electrical system and make a spark. If these parts are not working correctly or are broken, the engine on the lawn equipment will not start so the machine cannot be used. If the ignition set might not be working, use a spark tester with a plug lead to test. Place the control on stop or shut it off and attempt to turn on the engine using a key or cord. There should be no spark. When in the on position, a spark should be present. If the spark doesn't occur, there may be broken wires, grounds, shorts, or defects, so the parts will need to be replaced.This ignition set is a genuine OEM replacement part that was sourced directly from the manufacturer. It is sold as a single kit. The part is designed to be used in lawnmowers, tillers, leaf blowers, and snowblowers created by Cub Cadet, Briggs & Stratton, Broan, Lawn-Boy, and Toro.
The carburetor diaphragm is part of older model engines where a secure seal is needed. This diaphragm is installed on the carburetor and will help to ensure maximum engine operation. The carburetor is responsible for creating and providing the air/fuel mixture to the engine, and there are many working parts that help to ensure that happens, including the diaphragm. In the event that the seal isn't as tight as it should be or the carburetor seems to be performing less effectively, it might be time to replace this part. Replacing the diaphragm will restore the seal and ensure maximum engine operation, as well as prevent further damage to other parts. Make sure to wear gloves when working on engine parts and always disengage the engine and allow it to cool completely before starting repairs. This genuine OEM replacement part is designed for use on Briggs & Stratton engines, including 3-5 HP horizontal engines. It specifically fits those with the pulsa jet carburetor from previous generations. This part is made to exact manufacturer standards and complies with all guidelines and emission regulations.
This recoil starter, also called a rewind starter, drives the combustion process in small lawn and garden equipment engines. By engaging the recoil starter, the engine can be cranked manually with enough speed to get all of the operating systems for the equipment running. If the recoil starter is damaged or broken, the equipment will not start and cannot run.Simple use of the equipment can cause wear and tear that makes the recoil starter fail. If pulling on the cord leads to a feeling of slackness, it's often due to an issue with the recoil starter. The machine will not be able to be used until this component has been replaced. The process involves removing the recoil housing cap, untying the rope, and re-tensioning the spring before reinstalling the rope and housing.This recoil starter is compatible with lawnmowers, generators, snowblowers, leaf blowers, and tillers manufactured by Simplicity, Briggs & Stratton, MTD, Toro, and Cub Cadet. It is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. A wrench will be needed to replace the recoil starter.
This tube-pick up was created for three to five horsepower horizontal and five horsepower vertical engines with a two to three-quart tank and a pulse jet carburetor. As part of the carburetor, the tube-pick up moves gas from the float bowl to the main body of the carburetor. Sometimes the tube-pick up can become clogged up with particles and dirt, which makes it harder for gasoline to flow through it. This component can also become damaged or cracked, which means it will need to be replaced to operate the lawn equipment. Replacement requires removing the carburetor from the fuel tank, removing the tube-pick up and installing the new version. Carb cleaner may also be used in the process. This tube-pick up is a genuine OEM product directly from the manufacturer. It comes as an individual part and is made out of plastic. It is used for engines on leaf blowers, generators, tillers, lawn tractors, and lawnmowers by Simplicity, Briggs & Stratton, Cub Cadet, and Toro. A set of pliers may be needed to install the tube-pick up.