Parts for Mtd Pro 41CD425C995: Engine Assembly Parts

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

This O-ring is a genuine MTD part, sold individually. This O-ring can be used as a replacement part in a tiller, string trimmer, or edger. The purpose of the O-ring for one of these small engine outdoor appliances is to serve as a fastening component.This part may need to be replaced if it has been punctured, dented, chipped, cracked, warped, or eroded. The O-ring could also be lost or misplaced during other maintenance.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This O-ring is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, and Yard Man.

This is a screw that is used for many pieces of lawn and garden equipment in a host of different ways. Screws such as this one are used to hold two components together. If the screw is not affixed properly or if there is an issue with the screw itself, it could affect the stability of the machine. If it is missing or not tight, it might also result in added noise when the machine is in use.Screws are made from metal and can last for a long time. However, if the threads are stripped or if the head of a screw wears down, it should be replaced. There is also the chance of corrosion or of losing the screw when working on the machine.This part is sold individually, and it can work well for a range of different machines from MTD, Craftsman, Bolens, and Yard Machines. This is a genuine OEM replacement part that is from the manufacturer.

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

This is a replacement carburetor assembly that can be used for small engines, such as those found on lawn and garden equipment. The carburetor is where the air and fuel mix before going into the engine. It ensures that there is an accurate ratio of fuel and air, so the engine can start and run efficiently. While carburetors can last a long time, there is always a chance that they will need to be replaced. Normal wear and tear, damage from accidents, chemicals, or corrosion could mean a replacement is necessary. If the owner finds that their engine is sputtering, misfiring, not performing properly, or has trouble starting, the carburetor could have failed. The authentic OEM replacement carburetor features the metal body and the rubber primer bulb. It does not come with gaskets. The carburetor could be used for tillers, trimmers, and edgers. Compatible brands include Cub Cadet, MTD, Yard-Man, and Craftsman. Buyers must make sure they are buying the correct carburetor kit for their engine.

This is a genuine replacement O-ring, which is a standard part on a number of engines. This O-ring is specifically designed as a replacement for the one found in the carburetor on select lawn and garden engines. The O-ring is designed to create a seal in the carburetor to ensure optimal performance and prevent leaks. It is also designed to help create the right amount of pressure. Over time, O-rings can become corroded, worn, or damaged due to their exposure to pressure and high heat. If they become broken or damaged, they can result in poor engine performance or even total engine failure. This genuine OEM O-ring is manufactured by RYOBI and compatible with a number of tillers, trimmers, and blowers from this brand. It is also designed for use with select models from Bolens, Yard Man, MTD, and Troy-Bilt. There are more than 150 models that can use this specific O-ring. It is made of durable materials and sold as an individual unit. Keep in mind that because O-rings have multiple applications and engines may have more than one type, it is important to double-check the location and application of the part to ensure the right one is being used.

This is a genuine air box assembly designed to be used with select trimmer models. The air box assembly is responsible for holding and housing the air filter that helps remove debris and dust from the air as it enters the engine. The base assembly connects to the machine, while the air filter element goes inside the base and the plastic cover snaps on top to protect everything. This part may become damaged because it is made of plastic and exposed to constant vibrations and potential impact damage. In some cases, a full replacement will be best. This assembly is the exact fit for compatible models. This genuine OEM air box assembly is manufactured by MTD and designed for use in select trimmers from MTD, Yard Man, and Cub Cadet. The part is compatible with a handful of different models. It is made of durable plastic and sold as a single unit. This air cleaner assembly includes the plastic air cleaner base housing, the air filter element, and the cover. Always wear gloves and allow the engine to cool when performing any engine work on lawn and garden equipment and work in a well-ventilated area for safety.

This is a genuine replacement air filter designed for use with select models of lawn and garden trimmers. The air filter fits into a special assembly located near or on the carburetor and is designed to filter the air coming into the carburetor from the outside. The filter will remove debris and particles before allowing the air to pass into the engine, which means it will naturally become clogged with regular use over time. Air filters are typically a routine maintenance part and some owners will keep an extra filter on hand just in case they need it. When the filter is clogged, it will need to be replaced, whether it is time for maintenance or not. This genuine OEM air filter is manufactured by MTD and compatible with a number of trimmers from the brand, as well as select models from Yard Man, Cub Cadet, and Yard Machines. The air filter is made of durable foam material and designed to fit over the plastic air cleaner assembly, which is underneath the air cleaner cover. No tools are required to replace this part since the air cleaner cover snaps onto the base. This is sold as an individual unit and does not include the air filter assembly.

Clearly, one of the parts that any small gasoline-powered engine absolutely needs is the fuel tank. This particular design is especially used in tillers and trimmers manufactured by MTD, Troy-Bilt, and Yard Man. This fuel tank is designed to be easily accessible for the user since replenishing the fuel supply occurs on a regular basis during a working day. While this fuel tank is made of rugged plastic and manufactured to last, fuel tanks get more than their share of wear, jolts, and collisions because of their location on the body of the yard equipment. Should the tank's ability to safely hold fuel be compromised in any way, it is necessary to drain the fuel from the equipment and replace the tank immediately. Regardless of the particular piece of equipment the fuel tank is on, it is bolted in place in a simple fashion with minimal hardware. Speaking of which, the old hardware should be retained, since the tank is sold as a separate unit with nothing more than the fuel tank and fuel and vent lines. Be sure when replacing the tank to use a part like this one that is a genuine OEM part manufactured according to the specs of the original piece.

This is an MTD muffler screw designed to hold the cover of the muffler in place.The muffler screw is tightened in place in the center of the muffler cover using the proper screwdriver. Do not overtighten the screw, as this can cause potential damage and stripping. There should be no need for any extra fastening components to be added to the muffler.The part listed is a genuine OEM product and is sourced directly from the manufacturer. The component is sold individually. This product is compatible with MTD and Briggs and Stratton products.

This part is a replacement lead wire kit. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective lead wire in line trimmers.Lead wires are critical for the line trimmer to work as they connect the electrical system required to power the equipment. Wires can become stripped, broken, stretched, or otherwise defective over time and thus will require replacement. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Take caution when working with electrical wiring. For more accurate information on how and where to install these lead wires, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. These lead wires can be used with different models of line trimmers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

The Clutch Assembly is an OEM part for MTD outdoor power equipment. This assembly is used in various lawn and garden machines to engage and disengage the power from the engine to the drive mechanism, allowing for controlled operation of the equipment.

Causes of a bad clutch assembly can include wear and tear from regular use, exposure to extreme temperatures, or damage due to improper handling or maintenance. A malfunctioning clutch can lead to poor performance and control of the equipment.

Symptoms of a bad clutch assembly include:

• Difficulty in engaging or disengaging the drive mechanism
• Slipping or jerky movements during operation
• Unusual noises when the clutch is engaged
• Loss of power transmission from the engine to the drive components

This MTD replacement part is also compatible with other brands and models within the MTD family, ensuring a wide range of applicability for your outdoor power equipment needs.

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

This is a genuine replacement screw designed for use in select MTD engines on lawn and garden equipment. Specifically, this is an anti-rotation screw, which is used to stop the drive shaft housing from turning inside of the main housing assembly. This screw is a small part that is subject to constant vibrations, pressure, and high temperatures. It can sometimes become worn or damaged as a result or even break off entirely, which would mean that the inner housing would no longer be held in place accordingly. If this screw is damaged or lost, it needs to be replaced with a genuine OEM replacement as soon as possible. This MTD anti-rotation screw is manufactured with high-quality materials and designed for use in select trimmers from MTD, RYOBI, Yard-Man, Troy-Bilt, Murray, Cub Cadet, Yard Machines, and Bolens. This replacement will require a screwdriver. Simply remove the damaged screw, if it is not already missing, from the clutch cover assembly, and then install the new screw. It should only take a few minutes to perform the replacement. Be sure to wear gloves to protect the hands. This screw is sold individually and does not include any additional parts or hardware.

This is an ignition coil/module assembly for a string trimmer. Ignition coils are generally found on yard equipment that uses a motor, like lawnmowers and trimmers. It sends electric pulses to the spark plug so that the equipment can start.A faulty ignition coil can cause an array of problems. If the machine isn't starting it may need to be replaced. Sometimes, engine problems may be caused by other parts, so be sure to confirm that it is the ignition coil causing the trouble. An ignition tester can be used to tell if it needs to be replaced. The clutch and the engine will have to be removed to access the old ignition coil, once it has been accessed it can be aligned on the magnets of the engine and put back together for the machine to work again.This is an OEM replacement part sourced directly from the manufacturer and it is sold individually. It is for use with these brands: Yard-Man, MTD, Cub Cadet, and Troy-Bilt.

This is a genuine replacement flywheel spacer that is used on select outdoor lawn and garden engines. The flywheel spacer is used to connect the flywheel in line trimmers and provide adequate spacing so that the line can rotate properly to provide the trimming required. This spacer is made of durable metal but it can be damaged or become worn over time. If it is not functioning properly, the part will need to be replaced so that the unit is safe to use. This part can provide an exact fit for compatible models. This genuine OEM flywheel spacer is manufactured by MTD. It can be used in units from the brand, as well as compatible units from Troy-Bilt, Cub Cadet, and Craftsman. The spacer is made of durable metal and sold individually. Other parts will require an additional purchase. The line trimmer should be disconnected from power and the spark plug should be disconnected before doing any repairs. Wear gloves for hand protection whenever working on internal components on line trimmers and other outdoor power equipment.

This replacement part is an oil plug ring. It is a genuine replacement part made by MTD. This specific part is typically found in machines and appliances that have an oil tank. This ring is used to make sure that the oil from the machine does not escape during use.A new oil plug ring might be needed if the current one is allowing oil to escape from the tank. If there are oil drips near the engine it is possible that the ring is damaged or broken. This part is small but important to the overall use of many machines. Be sure to reference the specific user manual for more information on how to replace this part. This part is sold individually. It is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.