Parts for Yard Machines 11A-02MG000 / 2009: Engine Assembly Parts

This replacement fuel tank is an authentic OEM part for a lawn mower. The fuel tank attaches to the exterior of a lawn mower and allows the appliance owner to top up their mower with more fuel. Fuel is then passed from the tank to the carburetor through a fuel line. Fuel tanks are made of durable reinforced plastic but because they are located on the outside of the mower, they are susceptible to physical damage. If something heavy were to fall on the fuel tank, it could be dented or even punctured. A damaged fuel tank will leak gasoline on the mower body, creating a potential fire hazard. In this situation, the tank should be drained and then unbolted and replaced. Be sure to remove the fuel line before unbolting it from the mower. This replacement fuel tank is a top of the line part sourced from its original manufacturer. It is compatible with lawn mowers made by MTD, Huskee, Cub Cadet, Bolens, Yard Man, Yard Machines, and Troy-Bilt. This part does not include a fuel cap or a grommet. These parts are sort separately.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This push rod kit is a genuine MTD part, sold individually. This push rod kit can be used as a replacement part in a lawnmower. This kit comes with a variety of push rods in various shapes and sizes, perfect for the replacement or repair of a push rod within the internal machinery of the lawnmower. The push rods could be dented, punctured, scraped, cracked, warped, or eroded, and if this occurs to the point of reduced or no efficacy, the push rod kit should be ordered as a genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This push rod kit is compatible with the following outdoor appliance brands: MTD, Bolens, Yard-Man, Yard Machines, Troy-Bilt, Cub Cadet, and Husky.

The flywheel key keeps the engine flywheel and the crankshaft connected. In the event that the engine is forced to a sudden stop, the flywheel key could be sheared off, making it impossible for the engine to start back up again. Replacing the flywheel key is a part of routine maintenance for many modern engines, so it should be inspected and replaced as needed. This sturdy metal flywheel key is easy to install, but remember to choose the right torque setting when doing the replacement. Always disengage the spark plug and wear gloves when replacing engine parts. This genuine flywheel key is designed to be used in a number of lawn and garden equipment products from MTD, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Husky, and Bolens. It can be used as a replacement for many models of snowblowers, lawnmowers, and log splitters. Sold individually.

This authentic OEM replacement part is a fuel line kit for a lawn mower. The fuel line is arguably the first stage in a combustion engine. Before the engine can ever start, fuel first has to come from the tank to the carburetor via the fuel line. The fuel line runs from the inside of a fuel tank and into the carburetor. It attaches to the side of the lawn mower using two small metal clamps. Fuel lines are almost always made of either vinyl or rubber and, because of their location on the outside of the lawn mower, they can easily snag on something and tear. If the fuel line tears, gasoline will begin leaking from the fuel tank and pose a potential fire risk. Fortunately, changing out a fuel line is easy. With a pair of needle-nose pliers, pull the damaged fuel line from the carburetor and out through the fuel tank. Reinsert the new line and clamp it down to the mower. This high-quality part is compatible with MTD, Cub Cadet, Yard Man, Troy-Bilt, Bolens, and Yard Machines lawn mowers. It is sourced from the original manufacturer and includes a hose and two metal clamps.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.