Parts for Mtd E600E: Engine And V-Belts (E640f, E660g) Parts

This power cord extension is a genuine MTD part, sold individually. This power cord extension can be used as a replacement part for a snowblower. This power cord extension lengthens the reach of the power cord so that the appliance can be used from a greater distance from its direct power source while it is plugged in. The power cord extension might have to be replaced at some point if the cord suffers damage that renders it beyond functionality. This could occur if the cord is frayed, if it gets wet, or if it is punctured, torn, scratched, or eroded to the point that it does not power on the snowblower when properly plugged in. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This power cord extension is compatible with the following outdoor appliance brands: MTD, Toro, Cub Cadet, Ryobi, Tecumseh, Lawn Boy, Huskee, Montgomery Wards, Bolens, Yard Man, Troy-Bilt, and Yard Machines.

This part is a replacement gearbox assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current gearbox assembly is defective or broken, this part can be used as a replacement. It is intended for use with a variety of snow blower models.This gearbox assembly is what rotates the snowblower's blades inside the auger housing, making it an essential component. It will need to be replaced if jammed or faulty in any way. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this gearbox assembly, the appropriate owner's manual and equipment diagrams should be referred to. This gearbox assembly is suitable for use on a variety of snow blower models manufactured by MTD, Craftsman, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This hex screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in many different applications in lawn and garden equipment and can be used on many different machines. If the hex screw is missing or loose due to deterioration, a new hex screw should be installed. Hex head screws are removed and replaced using a hex wrench. Screws are used to secure one part of a machine to another part. This hex head screw is not self-tapping, it is designed for pre-drilled holes. Most applications will require a washer and bolt to secure the screw, but there are applications where the screw is inserted into parts that do not have an opening on the other side and so the screw does not need to bolt. Wear gloves when working with screws and outdoor equipment. This hex head screw is made of hardened metal and is sold as an individual unit. This hex head screw can be used on many different model machines manufactured by MTD, Ryobi, Murray, YardMan, Bolens, Cub Cadet, and Husky.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

This spring washer has a conical shape with an open center. It has a shape like a traditional washer but is smaller than a typical coiled spring. These washers can handle a larger load than a coiled spring and are used in lawn and garden equipment to cushion heavy loads. Over time, these washers can experience wear and tear which will lead to damage or breakage. When this occurs, the spring washer will need to be replaced.Visually inspect the spring washer for damage like scratches, breaks, and dents. If these occur or the washer is warped, it needs to be replaced. The process involves removing the nut or screw above the washer with a screwdriver or other tool. After accessing the spring washer, it can be removed and a replacement part can be added to the equipment. Reassemble the parts and the equipment should work again.This is a genuine OEM spring washer replacement part that is sold individually. It's sourced directly from the manufacturer. It is compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, chainsaws, string trimmers, and edgers by Craftsman, MasterCut, Toro, Turf King, Cub Cadet, Yard-Man, Ryobi, Bolens, Husky, Montgomery Wards, Murray, Huskee, Yard Machines, and MTD.

This V-belt is a certified genuine OEM replacement part for a snowblower engine. A V-belt is essentially just a loop of rubber but it is one of the most essential parts of the engine. The V-belt loops around a series of pulleys, and as the drive pulley is turned by the engine, the V-belt transfers that motion and turns the other pulleys. This allows the engine to run more efficiently. While an engine is running, the V-belt is constantly in motion, meaning that it receives a lot of wear. Over time, the rubber material will begin to fray, and if left too long, it will eventually slip or even snap. If the V-belt breaks, the transmission will no longer run and the auger blades will not turn. Therefore, it is important to check the V-belt's condition frequently. As soon as it begins to fray, replace it using a set of socket wrenches. Be sure to follow the owner's manual as a guide for how to loop the new belt. This replacement V-belt is compatible with MTD, Troy-Bilt, and Craftsman snowblowers and it comes sourced from its original manufacturer. This part ships individually.

This v-belt is a genuine MTD part, sold individually. This v-belt can be used as a replacement part for a snowblower. The purpose of a v-belt is to facilitate the rotation of the auger and the wheels so the snowblower can move over surfaces and blow snow out of the way of the operator and off of surfaces.The v-belt might have to be replaced in the event that it suffers damage to the point that it can no longer facilitate the rotation of the augur or of the wheels. If the v-belt has been compromised from a puncture, tear, rip, scrape, or sufficient erosion rendering it beyond functionality, the component should be removed and replaced by this genuine OEM replacement part before using the snowblower again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: MTD, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, and Yard Man.

This part is a replacement auger pulley. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective auger pulley in snow blowers.The auger pulley rotates the snow blower's auger blades by connecting the auger gearbox to the equipment's drive belt. This part is critical for proper functionality and thus will require replacement if faulty. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this auger pulley, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This auger pulley can be used with different models of snow blowers that have been manufactured by MTD, Craftsman, Ryobi, and other brands. Part sold individually.