Parts for Mtd 17AD2ACP004: Engine Connections, 3 Gallon Tank 50" / 54" Parts

This is an authentic exhaust tube assembly that is used with many models of lawnmowers. The purpose of the exhaust tube is to take any condensation found in the tank and move it away from the lawnmower. The exhaust tube is an integral part of the lawnmower and ensures it runs at its best. It removes excess moisture from the equipment and lets it out into the air. Over time, the exhaust tube assembly can become damaged or cracked and will need to be replaced.If the lawnmower exhaust tube assembly is damaged or broken, it should be replaced. The lawnmower should be turned off and the spark plug wire must be disconnected before beginning. Put the mower on a flat, sturdy surface to begin the replacement process. Work gloves and an adjustable wrench will be needed to replace this part. Unscrew the tube and remove it from the lawnmower before installing the new part.This exhaust tube assembly is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. This part is designed to be used with lawnmowers created by Yard-Man, Craftsman, MTD, Cub Cadet, and Troy-Bilt.

This replacement part is an exhaust tube. This is a genuine replacement part made by MTD. This part is used to expel material from many different types of machines. Be sure the exhaust is pointed away from the user so that it may be disposed of safely. A new exhaust tube might be needed if it's not working as properly as in prior uses. If the exhaust is expelling very dark smoke, the part might be dirty or clogged and should be replaced if this is the case. Be sure the engine is turned off so that the user can replace this part without breathing in smoke or other debris.This part is a genuine OEM replacement part to ensure proper fit and long-lasting use. This exhaust tube is sold individually and is sourced directly from the manufacturer.

A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.

This is a genuine replacement self-tapping hex screw with a blunt nose designed for lawn mowers and lawn tractors. It is used in a variety of locations for the engine assembly of lawn mowers. The self-tapping feature allows the metal screw threads to tightly secure to other metal. The blunt nose requires the use of a pre-drilled pilot hole smaller than the diameter of the screw. These screws do not interchange well. Be sure to check the owner's manual to ensure the correct part number. The hex head needs a socket wrench for the easiest removal and replacement. When removing this type of screw, stripped threads can occur. If this happens, use a screw of the same type in a slightly larger size to accommodate for the damage. Typically, this type of screw would need to be replaced when removed to access another part of the lawn mower for replacement, such as the carburetor. This an OEM part sourced directly from the manufacturer and is sold individually. This screw fits products by Bolens, Brute, Columbia, County Line, Craftsman, Cub Cadet, Huskee, Huskee Supreme, MTD Black, MTD Gold, Mastercut, Murray, Troy Bilt, Yard Man, & Yard Machines.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

This PTO clutch is a genuine MTD part, sold individually. This PTO clutch can be used as a replacement part in a lawnmower. The purpose of the PTO clutch in a lawnmower is to transmit the power generated by the engine into the blade so that the lawnmower can cut greenery.If the PTO clutch is severely damaged, it should be removed and replaced by this genuine OEM replacement part in accordance with the instructions sourced from a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This PTO clutch is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, and Yard-Man.

This replacement part is a washer. This is a genuine replacement part made by MTD. A washer is a small part but important to the overall workings of the machine. Washers work with other small pieces such as nuts and screws to keep parts in place and in proper working order.A new washer might be needed if the current one is missing or damaged in any way. This can be caused by normal wear and tear. Washers may experience a large amount of friction over time and can become stripped down after a while. If this is the case, be sure the replace the part as it might not be as effective as during prior uses. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

The muffler on lawnmowers prevents neighbors from becoming overly upset when the grass is cut early in the morning. When the engine starts on the lawnmower, the combustion releases burnt gas, making a very loud noise. The muffler dissipates the noise to make the lawnmower run more quietly. Over time, heat from the exhaust and constant exposure to the elements may cause the muffler to rust and possibly have holes that increase the noise. If this happens, the muffler should be removed and replaced to keep the noise to a minimum. Wait for the engine to cool so that the muffler is cool to the touch. Wear work gloves and have a socket set and adjustable wrench available. Remove the muffler screws and set them aside to use on the new muffler. Remove the damaged muffler from the mounting bracket. Install the new muffler on the mounting bracket using the mounting screws from the old muffler. Tighten the screws and start the lawnmower to ensure the muffler is installed correctly. This muffler is a silver metal part that is sold as one unit. It does not come with attachment screws. It is designed for use on lawn mowers manufactured by MTD, Ryobi, Yard Machines, Bolens, Yard Man, Troy-Bilt, and Husky.