Parts for Craftsman 917375950: Engine / Handle / Grassbag Parts

This is a quality rear skirt that is made for use with a selection of lawnmowers. It is used on walk-behind models and is attached to the back of the mower deck. The purpose of the rear skirt is to help offer protection to the user's legs and feet from debris and grass clippings. The rear skirt is made of black plastic but can be damaged through wear and tear from regular use. If there are cracks or holes in the skirt, it will need to be replaced.A screwdriver will be needed to replace the rear skirt. A pair of work gloves can also make the process easier. Make sure the lawnmower is turned off and located on a level surface before making this project. Disconnect the spark plug wire and then remove the screws on each end of the rear skirt. Take out the original component and replace it with the new one before replacing the screws.The rear skirt is sold on an individual basis. It is an authentic OEM replacement part that is directly sourced from the manufacturer. The component is made to be compatible with lawnmowers manufactured by Poulan and Husqvarna.

This bolt is a genuine OEM replacement part sourced directly from the manufacturer. It is designed for use with outdoor power equipment like lawnmowers and snowblowers. This bolt is a hex thread rolling bolt with the nut included. This type of bolt is designed to go into pre-drilled holes, such as on an engine. The hex threads on the bolt push the material through the hole, and the nut is then applied to secure the bolt. Bolts should be inspected as part of routine maintenance to ensure the nut is tightly secured and that the bolt has not rusted or come out. If a rusted bolt is discovered or a bolt is missing from the equipment, this replacement bolt can be used. Before replacing or installing a part on the equipment, allow it to cool and then remove the spark plug from the unit. Gloves should be worn when working with the unit. Install the new bolt and tighten the included nut. This bolt is a hex threaded, 3/8-16 x 1-1/8 bolt made of durable black metal and includes the nut. It is compatible with lawnmowers, snow blowers, trimmers, and lawn tractors manufactured by Husqvarna, Poulan, Weed Eater, Murray, and Craftsman.

Lawnmowers are equipped with mulching blades that spin at rapid rates to mulch up grass into small pieces. Blades can wear down, chip or break during use, either because of normal wear and tear or rolling over rocks and tree roots. A damaged blade will not make consistent cuts, and a replacement blade is required to improve the lawnmower's performance.Removing the blade on a lawnmower to replace it with a new one requires a pair of protective gloves. Check the size of the blade bolt to determine what size wrench is needed to remove it. Loosen the bolt, remove the old blade, and install the replacement blade safely, being mindful of the sharp edges.The blade is 21 inches long and compatible with all types of mowers and mulchers from Husqvarna, Poulan, Weed Eater, and Jonsered. This is an authentic OEM replacement part supplied by the manufacturer. It is constructed of heavy-duty metal material and sold as an individual unit.

This replacement part is a bracket adjuster. This is a genuine replacement part made by Husqvarna. This part is able to make adjustments to the mainframe of the lawn mower so that the user is able to operate the machine properly during use. A new bracket adjuster might be needed if there are parts that are unable to be adjusted. This can be due to a bracket adjuster being damaged or missing. If this is the case, be sure to replace this part as soon as possible to ensure the lawn mower can return to working order. Be sure the engine is powered off before attempting to replace this part.This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This part is a replacement zone control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken zone control cable in a variety of lawn mower models. The zone control cable is essential to safe use of the mower as it stops the engine should the user let go of the handle. This part will require replacing if stretched, snapped, or rendered ineffective. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this zone control cable, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this zone control cable is suitable for use on lawn mowers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a screw. This part is small but very useful in many kinds of machinery. This part connects components and ensures that they are secure.Screws may become stripped with overtightening, or corroded from exposure to the elements.This is a genuine replacement part made by Husqvarna. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.

This replacement part is an electric key start. This part is able to start and stop the machine during use and when the user prompts. A new electric key start might be needed if the current one is no longer working. Occasionally, the electric start key can become stuck in the equipment and may be damaged upon removal. Be sure the engine is powered off when attempting to replace or remove this key start. This should be an easy repair and only require common household tools, like pliers, at most.This is a genuine replacement part made by Dewalt. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.