Parts for Husqvarna 96175000202: Engine / Handle / Wheels Parts

This bolt is a genuine OEM replacement part sourced directly from the manufacturer. It is designed for use with outdoor power equipment like lawnmowers and snowblowers. This bolt is a hex thread rolling bolt with the nut included. This type of bolt is designed to go into pre-drilled holes, such as on an engine. The hex threads on the bolt push the material through the hole, and the nut is then applied to secure the bolt. Bolts should be inspected as part of routine maintenance to ensure the nut is tightly secured and that the bolt has not rusted or come out. If a rusted bolt is discovered or a bolt is missing from the equipment, this replacement bolt can be used. Before replacing or installing a part on the equipment, allow it to cool and then remove the spark plug from the unit. Gloves should be worn when working with the unit. Install the new bolt and tighten the included nut. This bolt is a hex threaded, 3/8-16 x 1-1/8 bolt made of durable black metal and includes the nut. It is compatible with lawnmowers, snow blowers, trimmers, and lawn tractors manufactured by Husqvarna, Poulan, Weed Eater, Murray, and Craftsman.

This O-ring is an OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this product is MTD. An O-ring is a small but important piece of hardware. It is designed for use with outdoor lawn and garden equipment including lawnmowers and string trimmers. It is compatible with products made by the following brands: Craftsman, Husqvarna, Weed Eater, Ryobi, Poulan, Murray, and Ariens.The design and purpose of the O-ring is relatively self-explanatory. It is an “O” shaped ring of material which is used as a gasket. It is designed to sit within a groove and be compressed during assembly. The reason for this is to create a perfect seal that blocks the path of liquids or gases from escaping or flowing into regions of the machine where they are not supposed to be.Replacing a damaged O-ring is crucial if the equipment is struggling to start. After checking the air filter cover, removing the carburetor, and cleaning it thoroughly, the next step is to replace the O-rings, carburetor gasket, and air filter, followed by the spark plug. Regular maintenance of the carburetor and routine evaluation of the suitability of the O-ring is essential to proper mechanical maintenance. This O-ring is made out of neoprene.

A hex screw can be used on a variety of different types of lawn and garden equipment. On small machines, it can be used to hold the housing together while on larger machines, it might be used to mount on the gas tank. It's versatile with the ability to secure items including wood, plastic, metal, and brick together. The screw is made of high-quality metal and measures 5/16-18 x ¾ inches. Sometimes these screws can become stripped, get damaged, or even break and will need to be replaced.Inspect the screw for any damage, looseness, or debris that might be causing issues. If the damage is major or the screw is stripped, it will need to be replaced. In most cases, the screw can be removed using nothing more than a screwdriver before inserting the replacement screw. For stripped screws, pliers may be needed to get the original screw out of the equipment.This hex screw is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. The screw is compatible with lawnmowers, string trimmers, snowblowers, and tillers by Craftsman, Ariens, Husqvarna, Poulan Pro, Weed Eater, and Poulan.

This part is a bail arm assembly that is used on weed trimmers. This component is made out of a high-quality, durable metal material and is attached to the handle of the weed trimmer. A bail arm assembly is a safety device installed on a specific type of weed trimmer. It is designed to make the line trimmer stop rotating when this part is released.A new bail arm assembly may be needed if the original is cracked, broken, bent, or damaged in any way. It's important to replace this part if the original bail arm assembly is not operating correctly. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine Husqvarna part. It is sold individually. This particular bail arm assembly is compatible with weed trimmers that are manufactured by Husqvarna.

This part is a replacement trimmer axle. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a faulty, damaged, or bent axle in a variety of trimmer models. The axle is what helps to drive the wheels of the trimmer and allow for easy maneuverability. Axles can become bent or damaged with regular equipment use or when using the trimmer on rough terrain. A damaged axle can make it difficult to control the trimmer or can prevent it from working at all. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this trimmer axle, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this trimmer axle is suitable for use on several different models of trimmers manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a genuine replacement wheel for select push mowers. The wheels assist with maneuvering the Lawn Mower and keeping the mower deck from coming in contact with the ground. On select models, the wheels are what offer a cutting height adjustment so that the grass can be cut to the appropriate length. Wheels can be damaged or become worn with regular use, necessitating a replacement. This wheel can provide the appropriate manufacturer part for compatible machines. Those who need to replace multiple wheels will have to order this part in multiple quantities. This genuine OEM replacement wheel is designed to be compatible with select lawn equipment from Husqvarna and Weed Eater. The wheel is made of durable composite plastic and sold as an individual piece. The washer and axle bolt required to secure the wheel will need to be purchased separately. This part can be replaced with a wrench and should only take a few minutes to repair. Always wear gloves when working on lawn equipment.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This replacement part is a cable drive and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Cable drives allow the user to control the transmission during.A new cable drive might be needed if the user is not able to control the transmission with the current cable drive. It is common that this part become damaged after years of normal wear and tear as it is a heavily used part in lawn mowers. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.