Parts for Craftsman 917371810: Engine / Housing / Handle / Grassbag Parts

This OEM part is a mulcher mower blade for lawnmowers. The mulcher mower blade is the blade assembly that is used to cut grass in a lawnmower. Over time, the mower blade can deteriorate, becoming dull and ineffective with extended use. If it's been a while since the blade has been replaced, it might be time for a new one. Luckily replacing a mower blade is a relatively simple process. Before beginning, the engine cool and wear work gloves. Disconnect the spark plug wire from the spark plug and remove the fuel tank cap. Place a plastic bag over the fuel tank opening and reinstall the fuel tank cap to keep gasoline from leaking out of the fuel tank cap vent. Tilt the mower back to lift the front wheels and secure the mower handle to a work table to hold the motor steady. Wedge a block of wood between the mower blade and the deck to keep the blade from turning when loosening the blade bolt. Loosen and unthread the blade bolt while holding the cutting blade to keep it from falling. Pull the blade, blade support, and blade bolt off the crankshaft. Make sure to position the new parts on the crankshaft. Hand-tighten the new blade and bolt onto the crankshaft. Use a torque wrench to tighten the blade bolt. This genuine replacement part is compatible with MTD brand lawnmowers.

This burner cap is a genuine OEM replacement part sourced directly from the manufacturer intended for use on gas stoves. This burner cap is for the B burner on the stove. The burner cap sits over the burner head to dissipate the heat and protect the burner head from food spills. If the burner cap is damaged due to food spills or becomes lost, it should be replaced before the burner is used. It is difficult to cook evenly if the burner cap is missing. The flame from the burner head is not evenly dispersed and is more intense. If the burner cap is damaged or missing, it should be replaced immediately.Tools are not required to replace the burner cap. Make sure the stove is not hot and has not been used recently before making the repair. To start, disconnect the gas and power from the stove. Remove the burner grate from the stove. Lift the burner cap and remove it from the burner head. Place the new cap over the burner head and align it. Set the cap on the burner head and return the burner grates to their places. Restore the power and gas to the stove.This burner cap for the B burners is made of heavy-duty metal. It is individually sold and made for gas stoves manufactured by Thermador and Bosch.