Parts for Husqvarna 917374440: Engine / Housing / Handle Parts

This is a key start with zone control cable that is used in many models of lawnmowers. It is attached on the handle at the control bar and is one of the components that help the motor start when the mower is being used. This part is made of durable plastic but can break or become damaged over time. When this occurs, the key start with zone control cable will need to be replaced to continue using the lawnmower.When replacing the key start with zone control cable, make sure the lawnmower is powered off and the spark plug wire has been disconnected. A pair of pliers will be useful for making the replacement. Put the lawnmower on a stable surface and locate the key start with zone control cable. This can be removed from the machine before installing a new component. Test the mower before use.The key start with zone control cable is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is made to be compatible with lawnmowers created by Poulan, Poulan Pro, Craftsman, and Husqvarna.

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This part is a replacement wheel. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective wheel in a variety of lawnmower models. This wheel is primarily intended for use with Power Wheels and features both the rim and tire. Wheels will need to be replaced if they are damaged to the point where the lawnmower cannot move freely or be maneuvered properly. Wheels are a high use part and therefor subject to wear and tear, likely requiring replacement during the lawnmower's regular lifespan. This part is easy to replace and does not require access to any specialized tools. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this wheel, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this wheel is suitable for use on several different models of lawnmowers manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This shoulder bolt is a genuine Husqvarna part, sold individually. This shoulder bolt can be used as a replacement part or a string trimmer. The purpose of a shoulder bolt is to serve as a fastening component of a lawn mower or a string trimmer in conjunction with a nut, so several components within the infrastructure of the appliance are held together and secured in place.The shoulder bolt might be easily lost or misplaced or could be damaged over time. If the shoulder bolt is stripped, the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This shoulder bolt is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Ariens.

This is a lawn mower clipping deflector for use with walk-behind mowers. The deflector attaches to the side of the mower and is used to guide the grass clippings out of the deck and away from the machine. Although this is a simple part, it serves an important function and ensures the grass is sent in the right direction while cutting the lawn.The clipping deflector has the potential to suffer a range of different types of damage. It can become cracked or break from use, and it can start to wear down over time. Rocks, sticks, and other debris can cause damage. Bumping into stumps and other objects could cause problems, as well. Eventually, it may require a replacement. The replacement process is relatively easy to do.The lawn mower clipping deflector will work with a range of models from Husqvarna, Craftsman, and Weed Eater. The part is made from durable plastic and is sold individually. It is a genuine OEM replacement part that has been sourced from the manufacturer.

This hinge rod is a genuine Husqvarna part, sold individually. This hinge rod can be used as a replacement part in a lawnmower. The purpose of a hinge rod in a lawnmower is to affix to the discharge chute so that the chute has a range of motion while remaining attached to the appliance to fulfill its function.The hinge rod in a lawnmower might have to be replaced if it is damaged. The hinge rod could be punctured, scraped, dented, cracked, or eroded to the point that the hinge rod can no longer affix to the discharge chute or that the component is loosened to the point that a repair cannot fix it. If this occurs, the hinge rod should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This hinge rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Ariens, Murray, and Poulan.

This is a replacement deck blade. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or damaged deck blade on a variety of different lawnmower models.The deck blade fits to the underside of the lawnmower to easily cut the grass. Blades can become damaged or blunted with time and regular equipment use and will require replacement. Access to proper tools is required to install this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this deck blade, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this deck blade is suitable for use on several different lawnmower models manufactured by Husqvarna, Poulan, Jonsered, and WeedEater. This is a genuine part made of high-quality, durable materials and is sold individually.

This genuine Husqvarna part is a hairpin cotter intended for use with Poulan, Husqvarna and Weed Eater brand walk-behind lawn mowers. This hairpin cotter, also known as a clip or hinchpin, is used to secure a component on a shaft in the lawn mower . This part is shaped like a bobby pin with a single piece of metal formed into a large ring at the top end, and a "W" shape at the other. This is designed to work with the groove or hole at the tip of a hitch pin, where this pin will lock larger pins in place. This part is an identical replacement for an original carrier bracket that is damaged, faulty, or missing. This dependable bracket carrier is made of high quality durable metal.This is an OEM replacement part sourced directly from the manufacturer and is sold individually. For installation information or hardware requirements, please refer to the original product manual. This part is a suitable replacement for a hairpin cotter in products from Husqvarna, Poulan, Weed Eater, Craftsman, Murray, Ariens, Ryobi, and other brands.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This replacement part is a key. It is a genuine replacement part made by Husqvarna. This key is intended to start and stop different types of machinery, typically a lawnmower. Without this key, the user might not be able to use the lawnmower at all. A new key might be needed if the current one is missing or damaged. This could mean that the key does not fit in the slot anymore or the previous key might be lodged in place. This is not unusual after years of use. It is recommended that the user refers to the owner's manual before attempting to replace this key. This should be a simple repair if the previous key is not stuck in place. This is also a genuine OEM replacement part to ensure proper fit and long-lasting use. Note that part is sold individually and is sourced directly from the manufacturer.