Parts for Husqvarna 917379130: Engine / Housing / Handle Parts

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This is a grass catcher frame that secures the grass catcher bag to the body of the mower. Mowers are twisted, lifted, and banged constantly, so a frame may become warped beyond use. If so, this OEM manufactured part is the solution. The replacement is an easy fix and should require less than 15 minutes and doesn’t require any tools. Simply remove the grass bag from the old frame, noting how the bag fit. Slide the new frame inside the bag. It should fit snugly with no undue tautness or slack. To make certain the frame was properly introduced into the bag, attach the frame to the mower. If the frame fits securely against the cowling of the mower, then the bag and frame have been fitted properly together. This grass catcher frame was designed specifically for Husqvarna and Poulan lawnmowers, though there are also a number of Craftsmen mowers on which this frame can be installed. This OEM part is sold individually. Bag sold separately.

This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bolt is a small but important part in many tools. These parts are able to hold different areas of machinery together so that the different areas of the device stay secure and steady. A new bolt might be needed if the current ones are missing or damaged. If parts on the appliance are falling off or are loose, the user should look into replacing a bolt. To replace a bolt or many bolts, the user must have access to common household tools. Simply remove the old one and use a screwdriver to replace it with a new part. Reference the specific user manual for further directions. This bolt is sold individually and is an OEM replacement part. Note that some devices require more than one screw so be sure to purchase the correct amount.

This adapter attaches the blade to the motor shaft and can ensure a secure fit for the size of the blade that you need. The adapter will hold the blade in place and allow it to rotate appropriately. Although this piece is made of metal, it can wear down with regular use over time and may need to be replaced. It could also become damaged, which would require a more immediate replacement. Either way, this genuine OEM blade adapter can provide a solution for compatible mowers. This blade adapter is reasonably simple to install, but always disconnect the spark plug before doing any work. The Craftsman blade adapter can be used as a replacement part on compatible lawnmowers models from Craftsman, Husqvarna, Poulan and Poulan Pro, Weed Eater, EHP, Yard Pro, Sears, Rally, and Roper.

This flange nut can be used as a replacement part for snowblowers, lawnmowers, and tillers. Flange nuts fasten materials to one another in conjunction with a bolt. A flange nut is different from a regular nut in that it features a protruded flange on its end that functionally serves as a washer, negating the need for a separate washer part. A flange nut might have to be replaced for several reasons, including the part going missing, which is a frequent occurrence as it is small and does not necessarily cause any immediate damage if it is lost. Additionally, a flange nut can be subject to damage over time through general wear and tear, overuse, punctures, piercings, scrapes, or erosion to the metal material. Such damage can hamper its ability to fasten materials together. If this is the case, a replacement flange nut should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This flange nut is a genuine OEM Husqvarna part, sold individually. It compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.